In case you’re planning to purchase a gas-powered pressure washer then, it’s time for you to know how to set up a gas pressure washer, proper maintenance, and store the parts. The life span of the pressure washer relies on how you handle the machine and its maintenance.
Whether your purchase a pressure washer to clean your car or any part of your house, this machine will exactly do its job. You can do the cleaning on concrete, vinyl, or painted walls.
Isn’t that amazing? This cleaning tool is considered an excellent cleaner all over the house. Various pressure washers are now on display in stores, such as an electrical, cordless, and gas-powered pressure washer. But, in all washers, gas-powered is the most recommendable, as it has higher psi and accurate performance. Without further ado, let’s start!
Why Is Gas Powered Pressure Washer Better?
If you have doubts about which is better among all other washers, let me give you some hints. As for the electric pressure washer, you need to plug it into an outlet. It has lesser mobility than the gas pressured washer. On the other hand, cordless or battery pressure washers offer lower psi.
Due to these disadvantages, many professional cleaners and homeowners prefer to use and buy a gas-powered pressure washer. Though it needs to be continually refilled with fuel and pump oils and requires more maintenance such as changing oil, replacing o-rings, and cleaning each part, it is considered the best option.
A gas-powered pressure washer needs fuel to start, and you can easily carry it anywhere outside the house. As fuel is flammable, this type of washer must be used in an open space or outdoors. It has higher mobility services and efficiency.
Steps To Set Up A Gas Pressure Washer
If your gas pressured washer just arrived at your doorsteps, you need to unbox it first. Check each cap or lid for possible paper tags inside and its part. Please strictly do not refill the fuel tank and pump oil, then try it out after unboxing, as some features might not be attached firmly. Remove any paper or tags.
Step #1. Fill the fuel
After you’ve carefully checked every part of the pressure washer, you can now fill the fuel tank. You can use a funnel to avoid fuel from splattering on the pressure washer’s surface, fill enough fuel based on the pressure washer’s manual. Do not overspill. You can also check the suitable fuel for your pressure washer as this varies. After filling, please close the cap or lid tightly. Know what kind of oil for pressure washer pump.
Step #2. Fill the pump oil
After you fill the fuel tank, you can proceed with the pump oil. This oil will serve as a lubricant in the pump and make this part move according to its usage. Open the cap and look at the mark you need to fill at the dipstick. Then, slowly fill it with pump oil. Similar to the fuel, there are different types of pump oil in pressure washers. Please recheck the correct type of oil you need. Here’s how to change oil in pressure washer.
Step #3. Attach sparkplug
If you have not removed the sparkplug wire yet, remove it and reinstall it firmly. The sparkplug plays a significant role, as it supplies a spark in the fuel and air mixture to produce engine power. So, it’s always better to attach it tightly.
Step #4. Attach the garden hose
If you at least want to run your newly brought gas-powered engine or you have to clean somewhere in the house, the next step is attaching your garden hose to your pressure washer. If you already have installed your hose in a faucet, then connect the garden hose into the inlet in the pressure washer. Find out more about pressure gauge attachment.
Step #5. Ready the washer wand and nozzle
After the garden hose, set your washer wand. If you’re putting your pressure washer and plan to clean on higher parts of the house, use an extension wand to handle these areas. To set this up, get your washer wand and the hose, attach the hose into the pressure washer and connect it to the washer wand.
Step #6. Choose nozzle in washer wand
Attach the appropriate tip or nozzle that you need. You can change it every time, and you can quickly install it. There are four types of nozzles for the washer wand. To quickly differentiate each from one another, they have different colors. The pink tip means it is a low-pressure nozzle, white is a 40-degree nozzle and wide fan, yellow is a 15-degree tip used to remove dirt on any surfaces, and red has a zero degrees tip, which gives out a very concentrated water stream.
Step #7. Start the engine
After you’ve successfully connected all the needed hoses, you can now turn on the engine. Turn the fuel and throttle switch on. Open the choke and pull the cord until you hear the choking-like sound (which means the machine is about to start), then close the choke. There you go, your question about how to set up a gas pressure washer is well-explained. Note that, before anything else, you need to place your pressure washer on a flat surface.
It’s A Wrap!
Now that you know the easy steps on how to set up a gas pressure washer, you are ready to start. Clean any part of the house by using an appropriate nozzle to control the pressure of the water.