If you want to know how to find a leak in an air mattress with tissue paper, you can check out this straightforward three-step guide. It is quick to do, so why not give your air bed a check-up as soon as you finish this article? And if you did find some leaks, look no further because this article also offers the solutions.
If you’re interested in other methods, here are different ways to find a leak in an air mattress. Some might find this tissue paper method tedious for a large bed, so it’s always helpful to know the other tricks.
How To Find A Leak In An Air Mattress: You Only Need Some Tissue Paper!
Step 1. Place the tissue paper on the top of the air bed
- Lay the inflated air bed over a flat surface and ensure that it will be well-supported
- Grab a piece of tissue paper and place it over the air mattress
- Have a pen or a tape to help you mark the leaks and damages that you’ll discover
- Work the tissue paper in sections to help you confirm that you’ve checked the entire air bed
Step 2. Press on the mattress
- Start at the top, edges, seams, then finally, the bottom side of the mattress
- Press one end of the air mattress close to where you placed the tissue paper
- You’re aiming to push air towards the spot with the tissue paper
Step 3. Watch if the tissue paper will move
- Check if the tissue paper will move when you press the air bed
- If there is movement, this means the air mattress has a hole
- It would help if you also work in a quiet room because air can make a noise when hitting the tissue
- Mark the air mattress leaks you’ll find
How Do You Find A Leak In An Air Mattress With A Built-In Pump?
Some types of air mattresses have a built-in pump. They’re usually electric, and depending on the model, can work both for inflating and deflating the air bed. However, they are still prone to developing leaks, and here is how you can find them:
- Make a mixture of dish soap and water and spray it around the air mattress with a built-in pump
- You can also soak a sponge in the soapy solution and wipe around the air bed pump
- The area around the built-in pump will form bubbles if there is a leakage because of the escaping air
- You might have also failed to seal the valve properly, so tighten it accordingly
- Check if bubbles will still form after sealing the valve
- Use duct tape to close up the area more if needed
- Check if there is a dust buildup, dirt, hair, or anything that might be obstructing the air pump
- Clean the air pump and check for leaks again
Why Is My Air Mattress Deflating But No Holes?
If you notice your air mattress deflating even if there is no visible hole, the leakage might be around the pump. Test for any escaping air and ensure that you have sealed the air bed properly. But another reason why your air mattress loses structure despite having no damages is the room itself.
High temperatures
If your room is too hot, it can change the integrity of the PVC or plastic material that the air mattress uses. The chambers will lose their volume, so the bed looks deflated. You might also be close to a heat source such as a heater, which changes the air bed’s firmness.
Limited space in the room
Your air mattress deflates with no holes because the holes themselves might be so small that they’re practically invisible. These very tiny damages typically happen if you put the air bed somewhere tight and the surroundings puncture the material without notice. Do not worry because there are ways to keep an air mattress from deflating that you can quickly learn.
Why Does My Air Bed Deflate Overnight?
Check the room
The temperature in your room does not only potentially stretch the plastic material on the air bed. Remember that cold conditions can also condense air; hence, air beds deflate at night when it’s colder. You might also be using the air bed somewhere higher, so it gets flat quickly.
Check the air bed’s weight capacity
Do you know how much weight an air mattress can hold? Check the manual on your model to ensure that you’re not pushing it past its capacity. Your consistent pressure throughout the night can cause the mattress to leak.
How Do You Fix An Air Mattress With Home Remedies?
- Use duct tape over the nozzle to close the leaks
- Detect the holes and damages throughout the air mattress and patch them up with any plastic material and super glue
- If there are bubbles on the air mattress, press them carefully as you open the nozzle to release air
Conclusion
If your air bed constantly deflates, grab some tissue paper. To recap this guide on how to find a leak in an air mattress with tissue paper, you only need to place the paper one section at a time and press the air bed. If the paper moves, then there’s leakage.
Assess the severity of the holes and damages before attempting to patch them at home. You can fix an air mattress with home remedies, but it might be a better idea to replace it if the damage is permanent. Here are some ideas on what to do with an old air mattress.