Do you want a new touch to your aesthetic? How about you try a little experiment on candles, like putting flowers on them. If you’re interested but don’t know where to start, we’ll teach you how to make candle with dried flowers.
You may use Flowers to decorate in a variety of ways. For example, your loved someone can enjoy a fragrant and long-lasting present with a homemade dried flower candle. But, unfortunately, making candles isn’t often the first thing that springs to mind as a present idea.
The thought turned many off that it was challenging to perform. However, numerous alternatives were available to buy in stores and online. Making your DIY floral candles, on the other hand, is much easier than many people believe.Also, it adds a charming touch to your present giving. It is also relatively inexpensive to make, requiring only a few simple components easily obtained locally. So here are the steps on how to make candle with dried flowers.
How To Make Candle With Dried Flowers
Step 1: Melting the wax
For the first stage on how to make candle with dried flowers, melt the wax on the stove. You may do this with a jug or bowl in a saucepan of shallow water or simply in the saucepan. Choose one that you don’t mind becoming waxy.
It is recommended to melt the wax at a low temperature slowly. It guarantees that the liquid cools rapidly and does not destroy the dried petals with its heat. As a result, keep this information in mind.
Step 2: Fill your glass container halfway with dried flowers.
If you’re using a clear container, it’s a good idea to clean it before adding the flowers and wax. It is so there are no streaks or markings after the wax cools inside. If you want to see more of the blooms, glue some of the petals to the edge of the glass.
Apply some of the flowers you wish to seal inside when you’re almost ready to add the wax. Don’t worry about the flower distribution at this time. You may add more gradually with the wax.
Step 3: Pour in the wax.
Turn off the heat and transfer the liquid melted wax to the container, beginning to pour within. As you continue, add a few more flowers and use the wooden skewer. It is to ensure that they are thoroughly embedded in the wax.
Step 4: Insert the wick and oils.
You should already have your wick ready to go into the candle. If you wish to add the oils, wait a few minutes after the wax has cooled. It is to ensure that the heat does not cause the oils to smoke.
If you’re adding solid odors like eucalyptus, only a few drops are needed, while more is best for more delicate perfumes. After giving the mixture a little swirl, insert the wick. Make sure it’s centered, so the candle burns evenly.
Step 5: Wrapping the wick to keep it in place.
Draw a pencil over the top of the lid hole. Once the wick has been adequately centered and measured to the bottom of the container. Then, you can wrap the extra wick around the pencil to protect it from sinking into the still-liquid wax.
Step 6: Allow the wax to cool.
Once everything is in place, find a cold, dry spot where the wax can harden. It might take up to 24 hours to thoroughly settle, so don’t rush, or the flowers or wick will fall out of position. Once all of the candles are lit, you may add any extra decorations.
If it’s for a birthday celebration, you might add a label with the recipient’s name or a birthday greeting. Whatever the occasion, your handmade flower candle should be able to wow your loved ones with its light, aroma, and artistry. It would even be an elegant piece to put on your wedding celebration!
How To Make Candle With Dried Flowers: Wax Melts Version
It couldn’t be easier to learn how to make wax melts using dried flowers! All that is required is melting soy wax flakes, adding scent, and then pouring into a mold. After that, arrange dried flowers in partly hardened wax.
On a kitchen scale, weigh ¾ lb of soy wax flakes to yield 9 to 12 wax melts. Place the soy wax flakes in a candle-melting pitcher to melt them securely. Then, place the pitcher in a large saucepan filled with 2 inches of water.
Heat over medium to low heat in a double boiler, often stirring with a spatula. After the pitcher has melted, remove it from the fire and insert a candle thermometer. It will track the cooling of the wax to the required temperature of your fragrance oil or 125°F for essential oils.
After that, add 1 ounce of fragrance oil or essential oils and mix consistently but gently for 1 to 2 minutes to properly combine. After adding the perfume, gently pour the wax 34-way full into the silicone mold’s 9 to 12 cavities on a stable, solid surface. Allow the wax to cool for a few minutes in the mold.
Then, in each wax melt, begin placing dried flowers. To modify petals or leaves, use tweezers for small pieces and a toothpick for more significant parts. Keep it simple with one giant Gomphrena Globosa Linn flower from this package of dried flowers for these floral wax melts.
It is easy to learn how to make candle with dried flowers. With these simple steps, you can make your spa day look boujee in no time! We have also added candle melts with dried flowers if it is also to your liking.