How to make arched window curtains? If you are here to find an answer to this particular question, then you sure are a savvy homeowner.
You might have found out already how expensive custom-made curtains that can fit your magnificent arched windows.
So it is indeed ideal for making your arched window curtain to provide the functionality and design that you desire.
The key is to make a pattern!
Steps To Make Arched Window Curtains
So, how to make arched window curtains?
Here are the steps for you to follow:
Step #1. Measure it
Start measuring from above the arch towards the intended curtain length and record this number.
Take note that the rod pocket is already included in this measurement.
To get the width, measure the widest portion of the window. Start from the left towards the right and also record the number.
Step #2. Make the pattern
After you get the measurement, you now need to create a template following the curve of the arch.
Attach several sheets of paper using tape to create a wide enough sheet that can cover the arch.
It must be three inches longer than the length of the arch.
Then, tape the sheet over the arch and start tracing the window casing’s outline.
Also, trace each side of the arch toward its full length.
Step #3. Cut the template
Takedown the paper and lay it onto your working space.
Then, start cutting along the line you traced earlier.
Step #4. Divide the pattern with vertical lines
After you cut the arch pattern, draw lines vertically from the bottom edge up towards the arch.
Leave an inch of space in between every line.
Number each section starting from the left.
Then, cut along every vertical line across the pattern.
Step #5. Calculating the curtain size
Calculate for the fullness that you desire for your curtain as well as the flat fabric width.
Step #6. Make an adjusted pattern
Get a paper pattern piece that is equal to the panel’s width ready.
Adjust the pattern to have a length equal to the length of the arch.
Then, get a pencil and start marking the piece of paper for the adjusted pattern with vertical lines.
Space them evenly with two inches for every line.
Position the first line about half an inch from the outer edge on the left.
Step #7. Placing the pattern pieces
Align the first pattern to the right and tape the first piece in place.
Then, it should be followed by the second piece in the next vertical rows.
Ensure that the left edge is aligned with the second line’s right edge.
Repeat the same process to attach all pattern pieces you cut onto the paper with the adjusted pattern.
Step #8. Drawing a new arch
In this step, you need to draw another arch line right above the taped pieces of the adjusted pattern.
Draw a curve smoothly, do not follow the lines of the taped pieces exactly because they are only placed as a guideline.
Step #9. Draw the cutting line
Sketch another line about half an inch on top of the arch line. Indicate this is a cutting line, including the seam allowance.
Now, cut onto the second line of the adjusted pattern.
In case you intend to have ruffles on top of the curtain, add the desired ruffle depth before redrawing the cutting line.
Step #10. Cutting the fabric
Following the adjusted pattern, cut the fabric as well as the lining. Ensure to add enough length that can accommodate the curtain and the hem.
Step #11. Sew the hemming
Sew the hems of both the fabric and the lining.
Do thing by aligning the top of the lining and the fabric with their right sides together. Then sew again, leaving half an inch seam allowance.
Step #12. Stitch the seams
Sew the lining and fabric together along the seams at the side, starting from the top down to the bottom of the seams.
Step #13. Creating the rod pocket
Turn the right side of the curtain out and iron. Then sew the seam to create the curtain rod pocket.
Step #14. Hang the curtain
Finally, you are done making your arched window curtain. What’s left to do is to slip the rod onto the pockets and hang the curtain.
Other Arched Window Treatments
Aside from curtains, you can also install the following window treatments on your arched windows.
#1. Blinds
Blinds for arched windows come in different types. It is good to install this because it requires minimal maintenance.
This is especially true if you dust or vacuum them regularly. Aside from that, blinds are also durable.
#2. Valances
Valances are best paired with arched windows.
These are elegant window dressing that is designed with pleats and swags.
The lower curve of the valance will conform to the shape of the window, thereby drawing the eyes of the people into it.
Although this can look very formal and a bit traditional, you can use sheer or light fabric to achieve a casual look.
#3. Mullions
You can add elegance to your windows without fully covering them through mullions.
These are vertical bars in between the windowpanes.
It’s A Wrap!
Although this project is quite hard to complete, you can still nail it if you ensure to follow the steps on how to make arched window curtains.