Do you want to know how to hang double rod curtains? Read more to find out.
The double rod curtains are installed to offer the windows a two-dimensional appearance.
With this, you are allowed to combine varying fabric types or color curtains.
The two rods that are parallel to each other are kept in place with the help of special mounting brackets.
In this post, we will discuss the traditional way of installing those double rod curtains.
Furthermore, we will also be teaching you the easier way to do it.
Why Use Double Rod Curtains?
If you are using the regular single rod curtains, you have the option to open or close them.
This may work for certain situations, but it isn’t always the case.
Correspondingly, if you layer drapes and sheer curtains, you will be able to filter and soften the sunshine without completely blocking it.
You might as well use double rod curtains to darken your room. For instance, you can hang blackout curtains and drapes.
This can also be used for decorative purposes. You can try hanging drapes with a window scarf or a valance.
Tools And Supplies Needed
Before you start, gather the tools and supplies needed first.
- Tape measure
- Rod brackets
- Curtain rods
- Curtain panels
- Ladder
- Hammer
- Stud finder
- Drywall screws or wall anchors
- Caulk
- Pencil
- Level
- Touch up paint
Steps To Hang Double Curtain Rods
In this section, we will walk you through the steps in hanging your double rod curtains.
So, how to hang double rod curtains?
Step #1. Marking for the placement on the wall
Place the ladder next to your window and climb it until you are level with its top frame.
Using your tape measure, measure about two or three inches from the top right corner and four inches above the window frame.
Mark this spot on the wall for reference. Then, repeat the same process on the top left corner of the window frame.
Step #2. Checking the alignment
Hold the level in between the marks you put in the wall earlier to make sure that the rod brackets will be aligned if you install them later on.
Make adjustments if necessary.
Step #3. Mount the brackets
Position the bracket onto the reference mark and put a mark for the holes on the wall.
Do this for both brackets.
Then drill the holes using a drill bit.
In case you are screwing the screws into the drywall, you need to insert a wall anchor on each hole.
Align the holes of the first bracket to the holes you made on the wall.
Then, screw the bracket screws provided into the wall anchors or stud using a screwdriver, following the instruction indicated by the manufacturer.
Do the same with the other bracket.
Step #4. Hanging the curtains
Thread the rods into the curtains. Begin with the rod that is closest to your wall.
In case you are using rods with different thicknesses, the thinner one at the back for this will be used to hold the lighter or sheer curtains.
Once you slipped the rod to the curtain, you can place it onto the rod already.
Installing The Double Rod Curtains Using The Hassle-Free Way
It is quite cumbersome to measure, level, and drill the hardware.
Fortunately, there is an easier way to do it.
You can acquire double curtain rod brackets that do not require drilling and follow the steps below.
Step #1. Preparing the window space
Clean the window first. Also, inspect for damages and leaks.
Make any necessary touch-ups or repairs for the existing damages you will find on the wall.
Ensure to double-check everything before you start the installation process.
You might as well wash the glass windows for a clean start.
Step #2. Measure for the curtain
Before anything else, you also need to decide on the desired placement and length of the curtain.
To get the right height, measure from the top of the frame of the window towards the floor.
Also, measure the depth and the width of the windows.
Step #3. Gathering the tools and supplies needed
For this procedure, you will need to prepare two curtain rods, no drill double curtain rod brackets, two curtain pairs, a step ladder, and a hammer.
Step #4. Mounting the double curtain rod brackets
Align the brackets right above the trim of the window and tap them in place with the use of a hammer.
And in as simple as that, you can already hang your double curtain rods.
It’s A Wrap!
If you know how to hang double rod curtains, you can transform a simple and boring room into something beautiful with added dimension and depth.
Aside from the fact that it can contribute to the visual appeal of the room, it comes with a lot of functional benefits.
For one thing, it will allow you to layer drapes or curtains, thereby creating more lighting and privacy options.
In hanging double curtain rods properly and safely, you have to use two similar curtain rods and double curtain rod brackets of any sort depending on your choice.