How to clean a carpet with a pressure washer? Position the carpet in an open and flat space, scrub the carpet using a detergent, and rinse it using a wide-angle end to remove the suds. The area rug is clean after you dry it correctly.
Remember that the rug gets dirty. All various dust, dirt, and stuff stay on the mat.
Regular cleaning like vacuuming or sweeping removes the upper dirt layer. Nonetheless, it doesn’t get into the deepest roots of a rug. This is true if something dries or spills or the carpet is stained. It’s just tiring scrubbing the area using a manual tool. Let us discuss more on this below. Keep reading!
Understanding First An Area Rug Or A Carpet
An area rug is similar to a carpet. The difference lies in the carpet covering the entire surface of a floor in a room, while an area rug covers just a specific area. The area rug comes in various designs and sizes. And these factors rely much on the preference and style of a homeowner. Use the area rug with many of its perks. This includes how the room is quieter as it absorbs the sound and protects the floor from further damage. What’s more, it makes space cozier and warmer. It also offers you the freedom to take off a slipper and keep your feet warm during the cold weather. Here’s everything you need to know about area rugs.
Reasons To Use The Pressure Washer To Clean A Carpet
Why do you have to use a pressure washer in cleaning a rug? Is it safe and essential? The area rug is big enough that it fits inside a washer. Clean it using your hand, but it is inefficient and time-consuming. The best thing is to use the right angle in the tip, including the correct pressure. Thus, the rug is safe in this case.
Preparing To Clean A Carpet With Pressure Washer
Cleaning a rug with a pressure washer is successful but carry it out with caution. Keep these tools in mind.
#1. Location
Clean the rug but ensure it’s a place with an adequate room. It’s where it can turn wet and soapy with no exposure of rug to muck, dust, or dirt. A clean place inside is okay if you use a pressure washer indoor. The right location will be a wooden deck or a concrete patio.
#2. Detergents
Check what the rug is manufactured of. Be sure the detergent you utilize is proven safe. Apply a small amount of stain remover, or better, carpet cleaner. Use a cotton brush or soft bristle in this case.
I guess it’s helpful to read about how to use soap with pressure washer.
#3. Pressure washer
Use the pressure washer; however, if there’s no method to control the pressure, begin with eighteen inches away from the surface in a rug. If it features a flexible option, start with the lowest setting. Increase the pressure on a gradual basis, including the distance. Find the most comfortable setting which you think will work. Apply the needed pressure so that the water pushes down into the fibers. Dirt is also readily dissolved, which is the main objective.
#4. Area rug or carpet
Begin to prepare the area rug and clean it. Vacuum the carpet before you remove it. Remove dirt from it. Carry out a complete inspection to remove stains. Make use of a mild form of gel stain remover. Then, use a small amount not to color the rug. After that, brush it to help dilute a stain remover, as this prevents the carpet from turning out yellow. Next, place a mild form of liquid detergent to wash the clothes. Make use of detergent with antibacterial properties. Position the area rug inside for about five to ten minutes.
You may also be interested to know about how to clean an area rug with pressure washer
Steps To Clean A Carpet With Pressure Washer
Below are the steps to follow on how to clean a carpet with a pressure washer:
- Prepare the needed tools before you begin.
- Prepare the area wherein you can perform the cleaning, like outdoors.
- Use the tip with the angle that measures thirty to forty degrees for a sweet spot. It does completely clean the rug with no further damage to it.
- The pressure washer ranges from one-thousand six-hundred and up to one-thousand eight-hundred PSI.
- Select the solution or detergent you will use.
- Clean the area rug as you vacuum it and remove loose dirt.
- Apply the solution or detergent as you wet it first and scrub by hand.
- Use the tip of a rotating brush with a detergent.
- Rinse the detergent or cleaning solution used with a pressure washer in a sweeping motion.
- Never use hot water.
- Flip the area rug to rinse underneath.
- Allow it to dry, and you’re all good.
It’s A Wrap!
Now you have learned how to clean a carpet with a pressure washer. It’s never as difficult as you think it would be, as this is one clear advantage offered by a pressure washer. Do it correctly to turn an unsightly and old rug into something lovely and fresh. Carefully follow the procedures to make the process more accessible and more comfortable. Prepare the cleaning supplies, the area rug, and the pressure washer!