Do you want to wash stubborn stains and look for a detailed guide on how to use soap with pressure washer? Your pick is excellent because soap is a perfect cleaning agent to wash out the grime and dust from the wall and sidings.
Soap is the best choice to wash out stains and give a cleaner look to any surface, as it is prepared from animal and vegetables fats and oils. That’s why it is biodegradable and can be flushed in the drains leading to the rivers.
We have to choose eco-friendly things in each phase of life, as there is no substitute for a healthy environment that comes from biodegradable things. Another reason to use it with a pressure washer is the emulsifier property of soap. Due to which it mixes oil remains with water and makes the surface grease-free. However, don’t use soap with hard water as it leaves behind the calcium carbonate as a deposit. Any inflammable cleaner like a carburetor or WD-40 damages the pressure washer, and you should avoid their use at all costs. Using soap with bleach could harm the pressure washer too. There is so much more to learn, so it’s best to dig into this article further!
Steps To Use Soap With Pressure Washer
Keep scrolling to find out the exact answer on how to use soap with pressure washer. Here are five simple steps that you can try:
Step #1. Cover your items
In the first step, it is necessary to cover up the plants and other fragile items to keep them safe from the high water pressure. Also, wipe out the about-to-wash surface with hot water if it has some tough stains on it. Are you all done? Let’s move on to the next step.
Step #2. Add soap
Now, it is time to add soap to the pressure washer. There are two different methods to do so. The first is, add the soap to the detergent or soap tank. All you have to do is, open the plastic cap of the tank, pour one cup of soap solution. Then, dilute it with two cups of water. Or, use a bucket as a replacement for the soap tank. Go with the way according to your convenience or your pressure washer model. Put a bucket near the washer and fill it with 1 part solution and two parts water, same as you do in a fuel tank. Place the soap injector hose with the filter end in the bucket. The hose should be appropriately set in the bottom. You may also want to read about how to put soap in pressure washer.
Step #3. Start the pressure washer
Now you are ready for the final step of washing your garage or car or anything you want to give a shiny and stainless surface. Start the washer and spray the solution upward and downward in all directions. The soapy solution will reach all the parts in this way. Leave the solution to set on the surface for 5 minutes. However, make sure that it does not become dry. It may be helpful to read about how to start a gas pressure washer and how to start a craftsman pressure washer.
Step #4. Change the nozzle
Five minutes have passed, now you have to wash the surface with water. Before doing so, remove the soap injector hose from the bucket first. Change the black nozzle to wide-angle and low pressure. Try attaching another nozzle of higher pressure for a better cleaning experience. At last, wipe down the soapy solution.
Step #5. After wash chores
Now, you are done with the basic process of cleaning. However, your work has not ended here. You have to do some after-wash chores to keep the pressure washer in good condition. Put the soap injector hose in a bucket of freshwater or fill the detergent tank with water and pull the cord to start the washer. The water coming out will remove the entire soap residue from the soap injector hose and its fitting. This step is of sheer importance as soap can cause blockage in the lines and tank.
Nozzle Choices
Nozzle plays a significant role in a pressure washer. You have to be careful about choosing the proper nozzle depending on the nature of the surface that you want to clean. There are plenty of nozzles easily recognizable due to the assigned color code.
For example, a red-colored nozzle has the shortest angle and highest pressure, and it is best for concrete surfaces. The yellow nozzle is used for peeling paints and budging mold and mildew from walls. Likewise, white and green nozzles are being used for wiping out surfaces like glass and wood and for general cleaning. These nozzles have varied angles affecting their functionality and surfaces to work on.
Alongside the nature of the surface, nozzle selection is essential if you want to add soap or detergent to the pressure washer. The black nozzle has the widest angle of 65 degrees in pressure washers of all companies and manufacturers. Chemical injector tip, the other name of black nozzle’s large angle makes it easier to spread water on the floors, cars, decks, and other surfaces like these. It may be helpful to check out the pressure noozle chart.
It’s A Wrap!
How to use soap with pressure washer was your question, and we tried our best to answer it. Pressure washing with soap is a convenient and effortless process, but the net results are excellent. Happy washing!