Have you ever had your Yaheetech swivel chair break? We have all been there. Thankfully, we are here to help! In this blog post, we will tell you how to repair a broken Yaheetech swivel chair.
All you need is some glue and the skills to use it. Follow our step-by-step guide below for how to fix your Yaheetech Swivel Chair in no time at all!
Steps on Repairing Yaheetech Swivel Chair
Step 1. Unpack the broken goods
Step 2. Clean up any leftover parts and glue from old repairs
Step 3. Apply a small bead of glue to each break in the swivel chair seat frame, then set it back together. Use clamps on all joints for best results! Be sure not to use too much force when clamping or you will crack the wood
Step 4. Allow drying for a few hours before reassembling with screws or bolts and nuts. You will need an electric drill!
Step 5. Place back on its original base onto chair frame, then tighten screw until the glue is no longer visible
Step 6. Once you’ve finished your repair, don’t forget to file your work so that it meets with the original shape and dimensions of the swivel seat frame!
Step 7. Make sure to clean up any leftover glue from your work area before you move on!
How do you fix a squeaky swivel chair?
The simplest way to fix a squeaky swivel chair is usually by lubricating the joint. This will involve removing whatever coverings are in place around the seams that have come apart, using a small amount of grease or oil on your fingers and rubbing its overall joints for best results!
Be sure not to use too much force when clamping or you will crack the wood. Allow drying for a few hours before reassembling with screws or bolts and nuts.
You will need an electric drill! Place back on its original base onto the chair frame, then tighten the screw until the glue is no longer visible Once you’ve finished your repair, don’t forget to file your work so that it meets with the original shape and dimensions of the swivel chair.
How do you fix a hydraulic chair that won’t stay up?
Once you’ve finished assembling your hydraulic chair, how do you know if the hydraulics are working?
Step 1. Check to make sure that there is a clear tube at both ends of the tubing. You may need to pull back on the lever while checking for this!
Step 2. If there isn’t any fluid at either end of the lever that doesn’t work, it’s time to replace the hydraulic cylinder.
Step 3. If there is fluid in both ends and you can adjust how high the chair goes with your foot on a pedal, then most likely all that needs fixing are leaky seals or hoses!
Step 4. Some chairs won’t stay up if they’ve been sitting for too long. Try adjusting how high the chair goes and see if that fixes your problem!
Step 5. If you’re still having trouble, feel free to contact Yaheetech’s customer service department for help on how best to troubleshoot your hydraulic cylinder issues!
How do you grease a swivel chair?
The Yaheetech swivel chair is made to be easy to service. To grease the main bearings, remove the dust cover on top of your casters and put a good amount of high-quality bearing grease in them.
For any other parts that need greasing, we recommend using an anti-seize paste such as Silicone Grease or a lithium-based lubricant like Lithium Lubricating Oil, with caution not to get it near electrical components!
These are available for purchase with our online store if you want something more specific than what’s found at your local hardware store.
Once everything has been greased up how you’d like it, all there is left to do is replace the footer cap by unscrewing the bolts, replacing it with a new one to your specifications (i.e., height), and tightening them back up again.
Why is my gaming chair so squeaky?
We recommend that you inspect all bolts and screws on the chair to make sure they are tight. If not tighten or replace as necessary.
Step 1. Check your caster plates, these should be evenly spaced from each other and there should be no space where a wheel is rested on an empty plate – if this is how it looks then you may need new casters for your gaming chair/office chair!
Step 2. Ensure any hardware (armrests, lumbar pillows) are tightened down onto their respective mounts with the appropriate amount of force to avoid them moving out of place.
What is a good wheel bearing grease?
Yaheetech grease is formulated to have the perfect viscosity and temperature range for wheel bearings.
This bearing grease can be found in our Yaheetech tool kit, which also contains other tools that might come in handy when repairing your chair!
We recommend using a small amount of this lubricant on all moving parts including rockers, swivel joints, wheels joints and casters before you operate the chair again. This will provide smoother operation and reduce wear on these components.