How To Reupholster Lounge Swivel Chair: Tips and Tricks

This blog post is for those of you who are thinking about how to reupholster lounge swivel chair. We want to help you make informed decisions so that you can enjoy your favourite piece of furniture for years to come, and not regret how long it took or how much it cost.

Use the right tools:

Having the right tools will make all the difference in how well this project goes. You’ll need a staple gun with a heavy-duty stapler, staples, small wire cutters/pliers, cotton batting (about 1 yard), upholstery fabric (at least twice as wide as your chair), old sheets or blankets that are large enough to cover both sides fully when draped over the chair, a well-lit workspace, and some patience.

how to reupholster lounge swivel chair

Steps on Reupholstering Lounge Swivel Chair

Step 1. Clean: Before you can begin assembling the new seat, you’ll need to remove the old stuffing.

Step 2. Remove: If you have already removed the upholstery fabric for any reason, now is a good time to go ahead and take off the staples that are left behind from your previous reupholstering job. Make sure not to pull on the fabric or it may tear; instead, use the flat head of your staple remover to pry out each one.

Step 3. Fabric: It’s time to cut and sew! You will need enough fabric from which you’ll be able to make two pieces that are about double the size of your chair (so if it measures 36 in., then get 64 in.). This is to make the back and bottom of your chair cushions.

Step 4. Sewing: Pin one piece of fabric on top of the other, then pin them together at their edges with straight pins so as not to leave any gaps.

Step 5. Upholstery foam: Take two pieces that are about double the size of your seat (so if it measures 36 in., then get 72-in. foam) and place the first piece of fabric on top with a straight edge facing down to make an “L” shape.

Step 6. Sewing: Pin both sides together, but leave one side unsewn so you can flip over the cushions at any time during this process (you will not be able to flip them after they are sewn together). Cut a straight line in the middle of the fabric, but cut at least an inch away from where it meets on one side of the “L.”

Step 7. Upholstery foam: Put down another piece with its opposite edge touching what you just sewed to create a “C” shape.

Step 8. Sewing: Pin both sides of the fabric together and then sew along this line, flipping it over once you’re done with one side so that the other is in view.

Step 9. Sewing: Flip the fabric over and sew along this line, again flipping it over a second time so that you can work on how to reupholster the lounge swivel chair.

Step 10. Sewing: After you’ve sewn both “C” shapes together, flip them one more time for final sewing.

Step 11. Fabric cut from the original chair: After you’ve sewn both “C” shapes together, flip them one more time for final sewing.


How much does it cost to reupholster a swivel chair?

The cost to reupholster a swivel chair can vary depending on how labour-intensive the job is. Labour can range from $100-$150/hr for one person and up to about double that when more than one worker is doing the project.

If you’re looking at an economy fabric, it could be as low as $50/yard, whereas higher quality fabric could be as much as $75-100/yard. The labour cost for the upholstery can range from about 50% to 75%.


Why should I reupholster a swivel chair?

Some people want their furniture updated so that the colours match and they have something more current. Others are looking for a way to have something customized to their taste.

How do you reupholster a bucket chair?

There are a few tricks to how you can reupholster a bucket chair. With these tips and tricks, your project will be completed with ease.

Be sure that you have the right fabric before starting on this simple process. You want to ensure that it is long enough so there isn’t any need for hemming later on in the process.

Step 1. Check online or go to local stores for great deals and quality fabrics at a low cost! It’s important not to skimp out when covering your furniture because it’ll only show up as time goes by – plus if you’re doing something like attempting an accent piece then colour may become more of an issue than ever before too… no one wants mismatched furnishings!

Step 2. Cut the fabric and double stitch it together so that you have a durable, fitted cover over your chair. You can use staples or small nails but I recommend glue for this project – just be sure to put them on the inside of the upholstery!

The last thing you want is an ugly nailhead sticking out from one side of the lounger. The glue will take care of any loose threads as well too which makes it impossible for things like fuzz balls or other accidents to ruin how slick your new design looks in its entirety.

Leave a Comment