Welcome to the Krostrade Marketplace, please excuse our appearance, we are still under construction.

How To Root Geranium Cuttings In Water

Are you wondering how to root geranium cuttings in water? As simple as this; dip the end of the roots into rooting hormones, and place it in a container with potting soil and water.

During spring and summer seasons, geraniums grow well. This flower is tiny in size but attractive in color; surely, an apple of the eye flower to the gardeners. It is easy to plant and grow a geranium in your humble homes or small greenhouse. After thriving, your garden will be filled with its lovely scent.

For you to explore more, we’ve prepared the basic steps in rooting geranium cuttings in water. For sure, you will finally know how to root geranium cuttings in water after reading this article.

how to root geranium cuttings in water

Rooting Geranium In Water

Although you can take geranium cuttings at anytime you want, it’s still better to wait for the bloom season. Geranium plants are worthy to see over your house or backyard. To propagate more geraniums in your homes, take note of the steps that might help you to do so.

Dig further and understand how to root geranium cuttings in water:

 

#1 Make your stem cutting

In doing the cuttings from the geranium plant, make sure to use appropriate and sharp tools. Using your tool, perform the cutting of the stem above its node. It will rapidly boost the growth of the main plant at its node.

The measurement of stem cutting is between 4 to 6 inches in length. Remove all the lower leaves of the stem. Perform the cutting with gentle care to prevent damages. It is also important to clean the tools for safety purposes.

 

#2 Dip the lower stem of the plant in rooting hormones

If you want to boost the developmental growth of your plant, soak it in rooting hormones; whether it be gel type, powder type, or liquid type. Either of these choices serves as a fertilizer to the germanium. But sometimes rooting hormones can also cause root rots.

Be aware and cautious in choosing the products you purchase to avoid damaging your plants. In a sense, organic and natural materials are better to use.

 

#3 Select a good container

In choosing the best pot, 3 inches pot will do for a minimum number of cuttings. But if you want to plant several geraniums, a 5 inches container best suited for it. Sanitize your plant containers by applying soap, bleach, and hot water. After that, rinse and wait until it dry.

Plant pots are essential for the growth of the plants. A professional choice of pots would matter a lot.

 

#4 Place in a suitable location

After you select the proper container, your cuttings can be poked in a container with the exact temperature. Place a potting soil that has a good drainage feature. Put in much water and spot a location that is direct to the sunlight.

The better the location, the faster your cuttings will grow and thrive.

 

#5 Remove falling leaves

If dry leaves are already falling inside the pot, be sure to remove it immediately. The longer the leaves will stay in the water, the higher chance it will rot and contaminate the water substance. Don’t put covers to the geranium as recommended. Always look for the plant and put water when it dries.

 

#6 Wait for the roots to come out

Just wait for your plants to send out its roots after you perform all the steps. When the roots are already set, prepare for a transplant of the plants. Transfer them to soil and wait for it to bloom.

The plants will grow well if you care for it consistently. Simple steps like these will help you start your collection of flowers.

 

Mostly Known Types of Geraniums

It’s a deal! Geranium flowers can easily attract the eyes with its splendid beauty. But choosing the best variety of geranium would take you to hundred folds of searching.

From 300 recorded species, we have sorted out the popular geranium for you. Before you should know how to root geranium cuttings in water, learn the types of geraniums first.

 

Ivy geraniums

It portrays a streaming effect of a series of flowers in a single stem. Some of its common names are cascading geranium and ivy-leaved pelargonium. Having a shape of circular to the heart is one of its attractive features. Another characteristic is shiny in leaves and has a bilateral symmetrical petal structure.

 

Regal geraniums

Marsha Washington geranium is another term that is commonly called to regal geraniums. They are usually used as home decoration and display to houses. This type of geranium can’t manage to stay in extreme heat. What’s beautiful about this flower is that it has a multi-colored burst of petals.

 

Scented geraniums

Its name already introduced this plant. Aside from its undeniably sweet scent, it also has bright petals that appear in pink or purple usually. But the name is somewhat deceiving because it contains toxic substances such as geraniol and linalool. They can irritate skin and eyes, dermatitis, and heartbeat changes.

 

Zonal geraniums

The zonal geranium is a classic type that you ordinarily recognize at home and gardens. It can bloom multi-colors such as red, burgundy, white, pink, yellow, purple, and orange. They can easily thrive because they are drought tolerant and can sustain longer heat.

 

Final Words

It’s a great discussion for you to digest. Learning these ideas will give you a good foundation of basic steps on how to root geranium cuttings in water. Hopefully, you’ll apply what you have learned right from the start until the end of this article. Who would have thought that you’ll become a famous flower collector someday?

Start by planting today!

Leave a Reply

Your email address will not be published. Required fields are marked *

How To Prevent Root Rot In Hydroponics: 3 Useful Tips

If you’re a newbie gardener who’s looking to find ways to hone your skills, you’d want to learn how to prevent root rot in hydroponics even before this problem affects your plants.

Hydroponics can be advantageous to crops in more ways than one. However, it also comes with risks of diseases, such as root rot, which can be destructive or even lethal to your plants.

Unfortunately, there are no effective methods to recover the wilted parts that were affected by the root rot once it hits your plants. The only thing you can do if you do not want this catastrophe to befall your crops is to prevent it before it happens. Read on to learn more about this subject.

 

What is Root Rot?

Root rot is a disease that attacks the plant roots and causes them to suffer decay. This usually happens when a lack of oxygen supply occurs in the substrate.

To give you an idea, think about plant roots that are submerged in water that only has a little oxygen in it. Over time, the plant suffocates and dies.

Aside from rot and decay, this disease also leads to the proliferation of fungi that are naturally present in the soil. These include Rhizoctonia, Alternaria, Pythium, Botrytis, Fusarium, or Phytophthora. As soon as fungi colonies start to grow, they tend to target the weakened roots and infect your precious plant babies.

Once the plant becomes infected, they won’t be able to take in what they need to grow – water, oxygen, and other nutrients. When this happens, it won’t be long before the plant dies.

 

What is Hydroponics?

In case you’re not aware, the term hydroponic is derived from a Latin word that means “working water”. To put it simply, hydroponics is an art that involves growing various types of plants without soil. If you’re like most people, the first thing that comes to mind when somebody talks about hydroponics would be a picture of plants with roots suspended into the water without using any type of growing medium.

 

Avoiding Root Rot in Hydroponic Systems

Detecting and identifying root rot can be tricky. When your plants get infected, their leaves and roots gradually wither until the whole crop itself dies from the lack of nutrients, which is a common symptom of many diseases.

 

What causes root rot in hydroponics?

One of the requirements in hydroponics systems is oxygen. Without it, your plants are basically on the road to death. On the other hand, lack of such is one of the major triggers for root rot, and it must be avoided at all costs.

Just like when planting in soil, you loosen up the ground so that your plants’ roots can have their required intake of oxygen. That is the case for crops grown in aqueous solutions as well. If they cannot breathe, they would not be able to grow.

Another agent for root rot is the temperature. The last thing you would want in your system are parasites that leech nutrients intended for your plants and infect the water during the process. In common terms, these fungi are called molds.

One of the best breeding grounds for these is warm and moist areas. For this reason, if the water temperature inside your reservoir is high, then you are susceptible to it. Something as minor as letting the solutions exposed to sunlight can already be a risk factor.

 

3 Useful Tips on How to prevent root rot in hydroponics

There is good news! Root rot in hydroponics can be prevented! Just follow these tips:

Tip#1: Use the right air pump

If you do not want root rot to affect your plants, you merely have to avoid its causes. If you need oxygen, keep the water bubbling by providing an air pump of appropriate size, and also give importance to proper ventilation in the room.

 

Tip #2: Maintain the temperature

The temperature should be maintained within the 70 to 80 degrees F range. Get rid of any materials that can make your system vulnerable to infections, and make sure not to disturb your crops while they are trying to grow.

 

Tip #3: Get rid of the rotten parts

However, if you failed in preventing the disease, then the rotten parts should be removed immediately. Cut them off as there is no chance of reviving them, and focus on the potential new growth instead. Fix your hydroponics system and eliminate the risks.

 

Why Give Greenhouse Gardening a Try?

Greenhouse gardening offers numerous benefits to greens aficionados who dare to take their gardening experience to the next level. Aside from acting as a shield against the effects of inclement weather, a mini, hobby, or semi-pro greenhouse can also serve as a protective layer that keeps harmful bugs and critters at bay.

What’s more, its enclosed structure allows you to control your plants’ growing conditions including the temperature, light, moisture, and ventilation of the greenhouse’s internal environment. With a controlled environment, you’ll be able to extend growing seasons and grow plants that aren’t native to your area.

 

Conclusion

No matter how well-informed you are about how to prevent root rot in hydroponics, you cannot completely eradicate the risks. Therefore, to avoid the worst-case scenario, you should be prepared to sacrifice the infected for the sake of others. While you’re at it, consider trying your hand at greenhouse gardening as well.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Sign up to our newsletter!