How To Reset A Water Heater? 6 Easy Steps!

Do you want to know how to reset a water heater? Apply these six extraordinary steps to discover how easy it is. Resetting the water heater doesn’t take too long, which is why it’s recommendable to be done by homeowners. Aside from that, you can manage it on your own and do not need a professional. If you think you’re ready for this, then let’s start!

Sometimes, you need to reset your water heater because the water from your hot water inlet is not warm anymore or at a decreased temperature.

how to reset a water heater

So, if you think that your thermostat is in good condition, does not have any loose wirings, is not grounded, and is corrupted, then resetting your water heater is what you need t restore your water heaters temperature. Without further ado, let’s dig into it!


Steps To Reset A Water Heater

The steps in resetting your water heater are easy. It will take time, especially if this is your first time, as you must locate every part and determine each function. But, you’ll manage to do this method quicker when you do this several times. If you are going to reset a water heater from another house, you must be careful and track how often they reset it. If they are do not regularly reset it, then resetting can be your option. Now, let’s discover how to reset a water heater!


Step #1. Turn off the electricity

Electricity makes your water heater function, and as of doing the method, you should turn off the electricity. Water heaters are plugged into an output to run, but some are wired directly into the primary wire. As for the plug-ins, if it’s wired directly, you need to turn off the circuit breaker. On the other hand, if the installer has installed your water with an isolation valve, you can turn it off without switching the entire electricity. 


Step #2. Remove the cover plates

After switching the electric source, you can now remove the cover plates. Some water heater needs Philip’s screw, while others require a flat screw. After recognizing which type of tool you’ll need, loosen the attached screws and lift the cover slowly. There are various models and brands, and some water heater has a second cover located at the top of the cover plates. If your water heater has it, you will need to detach it too.


Step #3. Remove the insulation pad 

An insulation pad reduces the heat loss required by the government. Behind the insulation pad, the reset button hides. You don’t need tools to remove the isolation pad, as it looks like foam covering the reset button. Pull it out quickly with your hands, then keep it aside. After removing the pad, you probably saw a red button. Some brands have a word written at the bottom, but others don’t, but the reset’s color stays red to determine it. 


Step #4. Press the reset button

After you’ve located the reset or red button in your water heater, press it until you hear a clicking sound. The click sounds indicate that you have successfully reset your water heater. If your water heater is supposed to sound, and you haven’t heard it, then you probably need to check the wirings and the controller. Meanwhile, another water heater does not sound after resetting, and if you don’t have any idea about the heater, you can reassemble the heater and wait for a few minutes if it produces hot water. 


Step #5.  Reassemble the heater

After you press the button and hear the “click” sound, or you’ve decided to wait for a few minutes to hot the water, then the next step will be reassembling the water heater. Some people get confused in returning parts, mainly because they are unfamiliar with the water heater parts, but it’s okay. Push the isolation pad back to its place. As it is like foam, you can quickly press it inside. If your water heater has two covers, return the last cover you detach and screw them, if needed, then proceed into the cover plate. The cover plate acts as a protective cover in your water heater, and you should never leave this part open. Reattach the cover plate and screw them firmly. 


Step #6. Turn on the power source

If your water heater is gas-powered, turn on the isolation valve. Some gas-powered water heater has a linear and diaphragm valve. You can turn it on linear by aligning the valve into the pipes. If you have a diaphragm valve, turn it on by turning the control knob. Do the same in the electric water heater if you have installed an isolation valve on it. Meanwhile, if your electric water heaters are connected directly to the wires, go into your electric or utility breaker then turn it on. It may also be a good idea to read about how to turn off your water heater.


It’s A Wrap! 

What a success! Now that you’ve learned how to reset a water heater you know how to manage your water heater whenever it does not deliver hot water. Take note that if you reset your water heater regularly, you require to call a professional to identify the problem in your water heater. It’s best to also know how to clean electric water heater and how to dispose water heater.

Leave a Comment