How To Reprogram Remote For Blackstone Adjustable Bed? 2 Easy Steps!

How to reprogram remote for Blackstone adjustable bed? You only need to remember the two steps listed below.

Remote is one of the essential features of an adjustable bed.

how to reprogram remote for Blackstone adjustable bed

It is used to control other parts of the bed base.

Moreover, it is responsible for achieving your desired position.

For example, it helps you elevate your bed and adjust the height.

On the other hand, Blackstone Company offers exclusive products.

Such as adjustable beds to better sleep for their consumers.

They aim to give excellent support to your bed and a drastic change for you to experience.

The Blackstone indoor remote controlled outlets use a radio frequency and do not require a line of sight to function.

As a result, they’ll put up a show regardless of the borders, doorways, or flooring.

If you want to know more about remotes on an adjustable bed, keep on scrolling!


Steps To Reprogram Blackstone Remote Of An Adjustable Bed

Reprogramming a remote is the same as syncing your remote from your new adjustable bed.

You only need to do the process you did in the beginning.

To recall what to do, here are the following steps on how to reprogram remote for Blackstone adjustable bed:


Step #1. Pair the remote to the base of your adjustable bed

Reprogramming the remote means repairing it again to the base of your adjustable bed.

The first thing you need to do is press the red switch present in the control box option.

Next, hold all the buttons present on the remote.

Excluding the following buttons: lounge, television, zero gravity, and flat.

To turn it on, you need to hold it for about five seconds to connect it with the base.

This step allows the controller to sync to the bed base of the adjustable bed.

Without this step, the connection between your bed and remote will not be possible.

Thus, functions and features will not work.


Step #2. Reprogram the preset positions

Preset positions are an important feature of remote control.

Thus, you need to set this all over again.

The buttons such as the Television button, lounge button, flat button, and zero-g button may all be programmed.

Next, adjust the base to your chosen position using the head-up and down buttons to configure your preset positions.

After you’ve chosen the appropriate position, tap and hold the icon you wish to program.

Again, hold the following buttons: lounge, television, zero gravity, and flat.

To configure the extra buttons of lounge, television, zero gravity, and flat, repeat the previous procedures.


How To Operate Blackstone Remote Control?

Here are the ways on how you can operate blackstone remote control:


Step #1. Take the pull tab out of the battery chamber

Remove the protective cover from the battery-powered remote.

To let the battery establish good contact with the remote control.

This step will enable the remote to work.


Step #2. Connect the remote to the receiver units

It would help if you plugged in the aingle wall receiver devices into any ground indoor 115V/60Hz wall socket.

But please keep in mind that the indoor remote control outlets will only work with a grounded outlet.

Contact an expert to update your electrical system if you don’t have an interior grounded outlet.


Blackstone Remote Operation And Safety Precautions

Here are the safety precautions that you should take note of:


Safety and operation

Per AC outlet, you can only use one indoor remote control outlet.

Therefore, there is a need to maintain a spacing of at least 24 inches among each receiver unit.

Moreover, remember not to exceed 1800 Watts on one Indoor Remote Controlled Outlet.

That might cause trouble if you neglect this reminder.

Next, you must place the receiver unit precisely into the power outlet with proper precautions.

Remember, this is for indoor usage only.

Furthermore, you should not utilize this product outside of the parameters listed above.

It is only for personal use. Unauthorized usage in this manner, or any situation specified above.

This will invalidate any warranty provided with this product and may result in significant bodily harm or property damage.


What is the function of the remote control?

The remote control operates each receiver included in this bundle.

Whenever the controller is in use, the red LED light on the front illuminates.

Each button is associated with a particular receiver—for instance, a remote control button.

One is in charge of the receiver.

When you press the remote button for the matching receiver, the receiver will turn on and off.


What to do if my Blackstone remote is not working?

Usually, remotes tend not to work because of battery malfunction.

Thus, battery replacement is a must.

However, get your new batteries to form where you bought your adjustable bed.



How to reprogram remote for Blackstone adjustable bed?

Blackstone remotes are not hard to reprogram.

You only need to check the manual and do the programming steps all over again.

You need to take action on this kind of problem since remotes are essential parts of adjustable beds.

Without it, your adjustable bed will not be able to do its work.

Leave a Comment