Office chairs spent a lot of time in their places, leading to their base wearing out. Do you know how to remove office chair base?
Replacing an office chair base from time to time is essential to keep your office work more manageable. It’s irritating to work while dealing with a broken office chair base.
Looking from a particular perspective, one might wonder that removing an office chair base will be a handful. Good news for you! The task is actually straightforward.
This article tackles specific steps on how you can successfully remove your office chair base. No need to worry about breaking it!
Steps In Separating An Office Chair Base
Dismantling your office chair comes from different reasons. It can range from relocating your office or simply replacing an old one.
Whatever the reason is, we got you covered. Here are steps that you can follow in removing your office chair base:
Step #1. Protect your working area
Before going on the procedure, you need to prepare your workplace. Do this by choosing a place where you’re comfortable enough. Place a cloth or newspaper below the chair.
Gas cylinders inside office chairs can release oils due to lubrication. Putting these objects prevents grease from reaching your floor.
Step #2. Turn it upside-down
Lay the chair on the floor or sit wherever you’re comfortable. Reverse the chair and face the base of the chair. Make sure you can clearly see and access the center of the chair base.
Step #3. Find holding clip
Search for the holding clip in the center of the base. Use a screwdriver or pliers in removing it. After this, bend the clip slightly to open and let it come off from the piston.
Step #4. Remove washer
The washer looks like a tiny car tire. Remove this by simply letting it slide off the piston.
Step #5. Disassemble the base
Now that you remove the securing screws, you can freely remove the base. Pull it simultaneously in an alternate counter-clockwise motion. The base should come off with the gas cylinder inside.
You have successfully removed the base at this point. Install a new one by reversing the procedure.
How Do You Remove A Stuck Base From A Chair?
A stuck office chair base is a problem indeed. The most possible reason for this is a rusty gas cylinder.
Solving this problem requires you to get a lubricant, a mallet, and a piece of clean cloth. It’ll be best to not use a white cloth since stains would be hard to remove here.
Put your chair upright and place newspapers under it to protect the floor. Spray or put lubricant on the covers of the gas cylinders.
Make sure that the lubricant would reach the inside of the cylinders and their bottom. Place your cloth on the side to avoid a mess.
Now, prepare to pound the chair’s sides with the mallet. You can use a rubber mallet for this.
Continuously pound the chair or add lubricant to the cylinder. The stuck base would definitely come off in a few seconds.
Are All Chair Bases Universal?
Knowing the rule of the thumb to replace chair bases, you might wonder if there are differences between their kinds. Can you grab anything from the store and put it on your office chair without hassles?
The quick answer is yes. Office chair bases don’t differ with their attachment sizes. These chair bases only differ with the materials they are made of, finishing processes, and your preference.
Office chair bases can either be made with wood, plastic, aluminum, or metal. Some can have wheels, while some may not.
The weight that chair bases can hold depends on the material they are made of. Plastic ones are not advisable to carry a large mass while steel can.
Likely, chair bases that don’t have wheels can increase productivity, while those with can increase mobility. Having a deep insight into the different kinds of chair bases can help you decide what to prioritize.
How Do You Take The Gas From Office Chair?
Like the base, an office chair’s gas cylinder needs replacements too. Test your gas cylinder first to ensure its quality before obliterating it. You won’t want to remove a working one!
A gas cylinder that sinks to the bottom ultimately needs lever adjustment. Try loosening the lever because it might be a little tight for the gas cylinder.
You can also try tightening the screws of your gas cylinder. Gas escapes from loose screws!
In some cases, the cylinder does not sink when you control the lever. This problem sometimes points out to the lever. Inspect it to see if it’s still working fine.
You can also look at the cylinder’s lock if it’s still good. Once you have tried this check-up and still have problems with your gas cylinder, proceed to replace it. Grab your mallet, wrench, and screwdrivers and remove your gas cylinder.
Conclusion
Now that you learned how to remove office chair base, you can do it anytime you need it. Gather the right tools and choose the right place to replace your office chair base, and you’re all set!
Don’t forget to replace your office chair base from time to time. Make your working hours comfortable and more productive with the help of this article.