Does your chair need elevation? Fortunately, you came to this article, which will show you how to raise chair height in a simplified way!
A table that is too high for its chairs is one of the most aggravating furniture issues. Yet, there’s a whole variety of options for raising the height of your chair.
Chair raisers, chair cushions, woodblocks, and a range of other things can elevate a chair’s height, depending on your preferences. Then, you will be able to sit at your table with ease before you know it!
Increasing Seat Height
Chairs come in different designs and styles. However, if the chair doesn’t offer enough height to suit your needs, it is possible to raise it a bit. To do this, you have to follow some simple steps.
Attaching chair raisers
Step #1. Pick your chair raiser
If you desire stability, choose linked chair raisers. Individual chair raisers are known, although joined designs tend to shake less.
The linked chair raisers have highly adjustable riser legs that move in and out and the side. You will only need one chair raiser instead of four if you choose a linked chair raiser.
Step #2. Choose a height
Chair raisers are typically available in sizes ranging from 1 inch (2.5 cm) to 5 inches (13 cm). Choose how much higher you want your chairs to be and purchase a chair raiser in that height.
Subtract the intended height of your chair from its current measurement to calculate the proper size for your raisers if you want your chairs to suit a table’s height better.
Although most raisers are one-size-fits-all, you should double-check the dimensions of the base to make sure it’s not too tiny for your chair legs.
Step #3. Fit in
Fit in the legs of the chair into the raisers. Both single and linked chair raisers include indentations for the chair leg to slot through.
Lift the chair, place the portion into the indentation, and then do the same with the other legs. Unless you have a linked raiser, all four legs of your chair should have a raiser to assure safety. If you think fitting the raisers is beyond your physical capabilities, seek the assistance of another person to lift the chair.
Step #4. Paint to match
Paint the raiser to match the color of your chair. Coat your chair raiser the same color as your chair for a sleek, low-profile look.
Apply for about 2-3 coats of paint, then seal it with a finish to keep the color from fading. Painting your chair raisers can make them stand out less, even if you can’t find a perfect color match.
Adding seat cushion
Step #1. Replacing cushion
You might be able to raise the seat height by replacing the original cushion with a fresh, firm pillow. A chair cushion can help you sit taller while remaining comfortable. Purchase a chair cushion and tie it to your seat if you need to boost the height to 5 inches (13 cm).
Step #2. Tuck in with a fabric cover
A pillowcase or fabric cover in a complementary or matching color will help to hide the extra cushion. In addition, the buffer will be more resistant to slippage if it has a non slip backing. Finally, you can cover a mismatched cushion with a slipcover.
Replacing or adding casters
Step #1. Drill in
Drill in a hole in the center of each leg’s bottom. Drill a slightly smaller hole than the caster’s shank with a slightly smaller drill bit than the caster’s shank.
Step #2. Secure casters
You may use wood glue to secure casters in place — special heavy-duty casters, such as ball-type casters.
Why is it essential to maintain seat height?
It is crucial to keep any chair at an appropriate height when using it. It will keep your back and neck in a relaxed and comfortable position. In addition, it will help you avoid a variety of problems that might shape the development of poor posture.
For example, if the seat is shallow, your legs will be uneasy. On the other hand, a chair that is too high will also cause you to keep leaning and bending over the table or desk, which is not a very relaxing posture. So, whenever you sit down, make sure that the height of your chair is comfortable for you.
Disclaimer
Certain types of chairs, such as those with tubular metal legs or hefty easy chairs that aren’t compatible with screw-in legs, may not correctly raise the leg height.
Casters with brakes improve the chair’s stability. However, if the individual who uses the chair is a senior or has any movement limitations or weakness, adding casters to the chair is not recommended.
Conclusion
Backache and pinched nerves are less likely to occur when you sit in the correct position. You’ll need to know how to raise chair height to be comfy and keep your back in good shape. We’ve shown how simple it is in this article!