Coffee’s enticing aroma is known to attract practically anyone’s attention. But what about coffee in the form of a candle? We’ve got a simple DIY on how to make a coffee candle.
Coffee-scented candles may appeal to you if you enjoy the aroma of coffee. However, how to make a coffee candle for yourself produces a far better smell. Making candles may appear scary, but it is relatively simple and enjoyable.
How To Make A coffee Candle
You’ll need the following items to make your coffee candles:
Natural Candle Wicks, a candle holder, a tin can, and a saucepan. You need water, a candy thermometer, soy wax flakes, and ground coffee. You also need a wooden spoon skewer, brown candle-making dye, tabbed wick, and a pencil are all required.
Method 1: Melt the Wax
Step 1: Choose a candle holder, clean it, and place it away. Now is not the time to add the wick. To measure the wax. You’ll need to use your candle holder.
Step 2: To make candles, set up a double-boiler. Place a metal can or a heat-safe glass measuring cup in a saucepan. Add a few inches/centimeters of water to the pot.
Step 3: Attach a candy-making thermometer to the can’s side. Place the thermometer on the interior of the can by sliding the clip over the rim. Move the thermometer up or down through the metal band and do not contact the can’s bottom.
Step 4: Fill the can with soy wax flakes. To measure the wax, use your candle holder. You’ll need 1.5 times the amount of wax flakes to fill your candle holder.
Step 5: Melt the wax over a high heat setting. Wait for the wax to melt after bringing the water to a boil over medium-high heat. In most situations, it will turn transparent or translucent.
Allow the wax to reach a temperature of 200 degrees Fahrenheit, or it will catch fire. Also, do not leave the wax unattended during this phase. Check the label on the container for the flashpoint.
Method 2: Adding Color and Scent
Step 1: To 12 oz (340.2 g) wax flakes, add 1 tbsp (5 g) ground coffee. If you want to utilize the fragrance oil, verify the flashpoint on the label. Allow the coffee to cool to the desired temperature if necessary.
Step 2: Cook the wax for another 2 to 3 minutes, stirring occasionally. During this period, keep an eye on the thermometer to see the temperature. Allow it to get no hotter than 200 degrees Fahrenheit and stir the wax using a wooden spoon.
Step 3: If desired, use brown candle-making coloring to intensify the hue. Get a brown candle-making dye block. Shave a tiny sliver off the block’s edge using a knife, then place it in the wax.
Using a wooden spoon, skewer, or craft stick, stir the wax until uniformly colored. As needed, add more slivers of dye until you get the desired hue. A small dab of candle color may go a long way!
Step 4: If wanted, add slightly more scent. Coffee, like lattes, comes in a variety of tastes. If you add a few drops of essential oil or candle-making fragrance oil, your candle will smell like flavored coffee. Start with a few drops of your favorite scent and build up as required.
Method 3: The Wax is poured and cooled
Step 1: Allow the wax to cool to 100 degrees Fahrenheit. Keep your thermometer affixed to the can’s side and keep an eye on the temperature as it drops. Once the wax has cooled to 100 degrees Fahrenheit, you must act immediately.
Step 2:In your candle holder, place a tabbed wick. Make sure the wick is higher than the candle holder. On the bottom of the tab, apply a piece of double-sided tape or a drop of super glue.
Press the tab against the bottom of the candle holder and tuck the wick into it.
A pre-cut candle wick with a metal disk affixed to the bottom is a tabbed wick. You may find it at a craft store’s candle-making area.
Step 3: Wrap the wick around a pencil that has been positioned across the candle holder. Continue wrapping the wick until the pencil reaches the candle holder’s rim. To keep the pencils together, use tape.
Step 4: Fill the candle holder with three-quarters of the wax. Save the last quarter for a later date. Pour the wax through a mesh strainer and then clean the filter right after.
If you’re in a rush or don’t mind wells forming in the middle, you can pour all of the wax.
Step 5: Allow the wax to cool to room temperature. It all relies on the sort of wax you used to produce the candle. It’s acceptable if the remaining quarter of wax cools as well. You’ll re-melt at a later time.
Method 4: Putting the finishing touches on the candle
Step 1:Finally, on how to make a coffee candle project, reheat the remaining wax if necessary. Using a double-boiler, reheat the remaining quarter of wax as previously. You may use this wax to fill your candle holder the rest of the way.
Step 2: Fill the well that has developed in the candle’s center with wax. If the wax overflows the well, don’t panic. As long as it stays inside the candle holder, you’ll be alright.
Step 3:Because you’re using less wax this time, it shouldn’t take as long as the first time. Scrape any wax that has gotten on the outside of your candle holder. Trim the wick to an 18-inch length. It will keep the flame from getting out of hand.
You may ignite the candle after trimming it. While the candle is burning, keep it on a heat-safe surface and never leave it alone. Trim the wick to 18 inches.
Conclusion
The ultimate in creating a comfortable, cozy environment is a coffee candle. This enjoyable and straightforward DIY project on how to make a coffee candle will fill your house with unique scents. Start yours now!