How To Install A Water Line To A Fridge? 7 Easy Steps To Follow!

Want to have an idea how to install a water line to a fridge? Take some piers, some connectors, and tubing, and we can start the process! This guide will show you easy-to-follow steps that will have your water line working to serve your needs in no time and efficiently. Read on.

If you are a beginner in fridge jargon, a water line is a direct passage from your main valve to your refrigerator. This connection is responsible for delivering the necessary amount of water your appliance needs for it to work.

how to install a water line to a fridge

A fridge needs a good amount of H2O to satisfy its basic needs for temperature and ice making. Which makes a securely installed water line essential.


7 Easy Steps To Install A Water Line To A Fridge

Installing a water line is no easy work. If you have enough resources, it would totally be convenient to call for a professional. However, a little DIY won’t hurt anyone, especially your pockets. This guide will make it easier for you to keep up, especially if you’re new to stuff like this.

#1. Prepare all the necessary materials

Before you start, it would help gather the needed tools to avoid stalling the project. Starting with complete equipment for a smooth-flowing workload. For example, in learning how to install a water line to a fridge, you will need the following:


Tool #1. Cloth and a pail

In beginning your task, a cloth and a pail will be extremely handy when removing excess water from tubes and valves. These materials will keep distracting stuff from hindering your work. It will also lessen the risk of slipping and the possibility of hazards. Moreover, it won’t be much of a hassle because most, if not all, households own at least one pail and some cloth.


Tool #2. Pliers or wrench

This is an essential tool since this requires handling many amounts of screws and connectors that need equipment to attach and detach. Most people have an impending toolbox at home for necessary repairs, but you can borrow or buy one since it would be convenient for other situations if you don’t have one.

We recommend pliers since they can handle all sizes of bolts and screws, but if not, you can use wrenches. Some wrenches have adjustable knobs that you can widen or compress depending on what you want to accommodate.

It will be convenient to have this kind.

If none of these are available, there are also normal wrenches that come in various sizes. Again, you can buy a set or buy a specific size based on your bolts.


Tool #3. Add-A-Tee Adapter

This is a convenient connector that attaches any other supply line to your main water valve. Its connector is an easy capture nut that makes connecting between lines straightforward and quick. Learn what Add-A-Tee adapters are!


Tool #4. ¼ inch water supply tubing with compression connectors

This supply tube will serve as the passageway of water between your appliance and the water tank. This is the most important piece, so you have to make sure your tube is in good condition. Be on the lookout for holes and cuts.

The compression connectors are also quite convenient since they have a tight and firm hold between the connectors which will lessen the risk of leakage.

#2. Turn off the main water switch

Make sure to cut off the water before starting. Since we will be opening up tubes and valves, we need to ensure no water will suddenly come out of it. This is to avoid sudden bursts and pressure release if water gets accidentally switched on from some of the faucets. Not to mention the amount of water you’ll lose.


#3. Choose a water line and disconnect

Choose a water line source and then remove it using your pliers or wrench. Drain water or wipe it off using your cloth and pail. Make sure the floor is dry as well. Once you do that, take your supply tubing and loosen the compression connector on one side.

This waterline will serve as the water source of your fridge so it would be important to consider distance, stability, and hazard risks when choosing one.


#4. Put the Add-A-Tee Adapter to use

Take the adapter and then attach it to the main valve’s hole. Tighten it using your tools, secure it as tight as possible. Also, be careful with the main valve. Brute force is needed to tighten the connectors, so be mindful of the valve and use something to stabilize it.


#5. Connect your water supply and fridge

Now, reattach the faucet line onto the hole of the adapter that matches its size. Please make sure they are of the same size and lock firmly. A hole too big will start leaks, and small ones will probably burst from the pressure of having larger amounts of water entering it.

Attach your supply tubing onto the remaining hole. Make sure it is of the matching size as well. Tighten and lock it firmly.


#6. Connect the tube and fridge

To connect the tube and the fridge, take the free end of your tube and direct it to your fridge. Find the supply fitting in your appliance and attach your tube inside. Fasten securely and again, lock using pliers or wrench. Read how to disconnect the water line from the Samsung French door fridge!


#7. Test the water

Now, we’re about to find out if you have succeeded. Once you’ve secured all the necessary locks in place, turn the main water switch on once again. Next, turn your fridge on and check if the necessary features are indeed working. It will also be nice to check for leaks in the waterline. If there are any, tighten them.



Now that you know how to install a water line to a fridge, you are ready for the action. Take all the needed equipment and your new knowledge, and have a blast! Of course, you might want to learn who invented refrigerators! Regardless, thank you for your time!

Leave a Comment