How Much Does It Cost To Replace A Burner On A Glass Top Stove? Consider 3 Basic Factors!

How much does it cost to replace a burner on a glass top stove? The replacement price could vary depending on the price of the burner itself, but the cost ranges from $50 up to $200.

Taking good care of your equipment is the same as keeping your expenses low. But we all know that there will come a time that our equipment will get used up and needs repair.

How much does it cost to replace a burner on a glass top stove

The same thing is true with our kitchen equipment about our stovetops. One of the most common damages a stovetop could get has something to do with the burners. Well, it’s only natural since we often use them when we cook, but how much do you think it will cost you to either repair or replace one? Everything you need to know about the maintenance and replacement of your burners.

 

How Much It Cost To Replace A Burner On A Glass Top Stove  

While you are probably cooking your heart off and only to be heartbroken to know that your stovetop won’t turn on or ignite, you are probably thinking of how much it costs to replace a burner on a glass top stove?

According to experts, repairing a glass stovetop could run from $50 up to $200 but that will depend on several factors.

With that said, you could lessen the expense by knowing how to fix stovetop burners or use a gas stove and other troubleshooting tricks to help you.

 

Replacement Guide Of  A Burner In A Glass Stove

When glass stovetops are easy to clean and maintain, it is not recommendable to do a self-replacement procedure. Fortunately, you could repair the burner element with the following steps below.

 

Step #1. Unplug

The first thing you’re going to do is to remove the plug from the power source. A glass stovetop is an electronic appliance, so you’ll have to disconnect it from the outlet to avoid getting electrocuted while repairing it.

 

Puffy Lux

Step #2. Open

In repairing a glass stovetop, you’ll need to open the glass top but remove the screws first. Be careful on taking the screws and lifting the glass off since the glass is very fragile. You could ask for assistance from someone in your house in this process.

 

Step #3. Remove the damaged element

After opening the glass top, you’ll see that the heating elements are held by two flat bars. To remove these metal bars, you’ll have to unscrew them from the metal frame and remove the burners gently from the surface.

 

Step #4. Disconnect

Before disconnecting the wires, please take a photo of it for reference in reconnecting the wires. Then, use needle-nose pliers to take the wires out. Do not pinch too hard, or you’ll break the connector. Next, remove the element from the metal bar by unclamping it. Then you can start installing the new part. You should often order a new coil first since it has a specific type for each model.

 

Step #5. Install the new part

In placing the new element, you’ll need to reverse the steps of removing it. Clamp the new part to the metal bars and frame. Reconnect the wires, and you could use the photo that you’ve taken as a reference before.

 

Step #6. Closing

After reconnecting everything back to normal, screw the glass back on top. Then plug the range back on to test whether your repair has been successful or not. If it does not heat up, try checking your wire connections.

 

Factors That Affect Repair Or Replacement Price

Some factors affect the price of the repairs of your electrical equipment. There are several factors, so I set a guide to help you decide whether to repair or replace them.

 

#1. Equipment age

One of the first things to consider is the age of the equipment. The older your equipment, the parts and repairs may have to be more extensive. Of course, this will result in a higher maintenance cost. You may want to consider buying a new unit than investing in replacing the parts, which may turn out more costly than having a new one. It is an excellent opportunity to find a model that is best when it comes to efficiency and longevity.

 

#2. Cost of repairs

Not only will you be repairing, but will it be an excellent investment to have just a part replaced and use it in the long term? If your benefits are more than your disadvantages, then go for the repair, which would cost you about $200 at least.

 

#3. DIY or professional

Of course, having the job done by yourself is way cheaper than hiring a professional to do the job. However, if you think you lack knowledge about the repair, it’s best to leave it with the professional not to inflict further damage to the equipment.

 

Conclusion

Anyone would be surprised if your cooking equipment doesn’t work while you’re cooking, right? You would probably think, “How much does it cost to replace a burner on a glass top stove?” Well, I think you should be warier if you’ll have to replace the part or buy a new one instead. Think about the benefits or downsides of getting the replacement if it’s worth the price. It may also be helpful to read how to stainless steel stove clean.

Leave a Comment