Why Does My Dryer Start Then Stop? 4 Surprising Reasons!

The question is: why does my dryer start then stop? There are four primary causes for this. We’ll go through each of them in detail, as well as what you can do to prevent them in the future in this article.

The clothes dryer which starts and then stops rapidly turns into a significant inconvenience; after all, if that batch of clothes does not dry, it will smell like mildew. It may be as easy as changing a door lock in certain circumstances.

why does my dryer start then stop

A careful examination of a possibly difficult obstacle may help establish if the problem can be fixed yourself or needs expert assistance. When you don’t know what’s causing a dryer to stop working, it may be aggravating, particularly if you don’t know why. Knowing some of the most common causes of a dryer stopping in the middle of a cycle might help you figure out what’s wrong and fix it. Let’s get started with that!

 

Reasons Why Does Your Dryer Start Then Stop

The four main reasons why does my dryer start then stop are as follows: You need to learn these reasons to deal with the situation well. 

 

#1. The dryer motor overheats

Overheating dryer motors are the most common cause of a dryer shutting off within a few minutes. A new one may be required if this happens. A simple test may determine whether or not you need a new motor. Turn on the dryer and let it run for a few minutes. Wait a few moments and see if the dryer gets going again after it shuts off. Motor overheating may be seen if this happens. If it doesn’t work, go on to the next possible cause. 

Before you buy a new motor, be sure that the problem isn’t caused by a full lint filter or an overfilled dryer. To fix the problem, you will have to change the motor if those two factors are not to blame. Remove the access panel on the bottom. Disconnect the lint filters by finding them and pulling them out. Two screws will now be visible, gently remove the two screws and take off the top panel of your dryer.  Remove the dryer disc from the dryer box and put it aside and find and disconnect the wire that connects to the motor. Unplug your old motor and replace it.

Remove the wires from the motor and reattach them. Check to see whether the issue has been resolved after your dryer has been put back together. If the answer is no, then go to the next reason. You may also be interested to know about dryer cuts out after a few minutes running.

 

#2. Defective belts

Drive belts are the second most common cause of your dryer shutting off when the dryer motor itself isn’t the issue. As a result of a malfunction or breakdown, the dryer would not work as expected. Checking the belt is simple; all you have to do is: You need to unplug the dryer and take it off the bottom access panel.

To do this, look inside the dryer for the dirt filter and take it out. Unplug the screws that you can now see. Disconnect the dryer’s upper panel, the motor belt will now be accessible. It’s a good idea to inspect the diver’s belt for indications of damage or if it’s broken.

If this is the case, a new one will be required. Unplug the old one from the machine and replace it. To replace the belt, first, separate it from the shafts and then lift it to free the bearing. When you remove the old belt from the drum, put the new belt around this one instead. Check to see whether the issue has been resolved by reassembling the dryer. If so, go to the third reason.

 

#3. A broken door latch

When the dryer is running, the door latch ensures that the door is tightly closed. It must be changed if it malfunctions as a result of excessive usage. To test the door latch, all you have to do is lock the door of your dryer and see whether the door latch is securely shut. If this is the case, the door latch has to be changed. Replacing the door latch entails the following: 

Turn off the dryer by unplugging it. Take off the hood latches then remove the door latch, you must first unscrew the door. Install the replacement door latch after removing the old one. Reinstall the dryer door and reinstall the hinge screws. Check to see whether the dryer now runs continuously after turning the power on. Continue with the last reason if you can.

 

#4. The moisture sensor is faulty

Dryer moisture levels are kept under surveillance by the sensor. This sensor tells the controller to stop the dryer when there is too much moisture in the air. A moisture sensor test is as follows: Turn off the dryer by unplugging it and unplug the screws that have been located. Remove the top plate and unhook the boards that have been installed. 

Remove the panel, and then detach the panel’s control. Pull off the front board’s securing tab, and disconnect the front panel by unscrewing the screws on the bottom. Disconnect the cables from the sensor. Disconnect the attachment plate. The old water level sensor will now be easy to remove and the new one will be easy to put in. Put your dryer back together after installing the new moisture sensor.

 

It’s A Wrap!

Now you know the answer: why does my dryer start then stop. There are four reasons we have mentioned above. If you don’t want to fix the issue yourself you need to call a pro. Thank you, friends, for reading this article till the end. You may also want to read about where to rent a washer and dryer and where to buy apartment-size washer and dryer.

Leave a Comment