How To Wash Silk Blanket For Best Sleepy Times: 3 Easy Ways

Do you know how to wash silk blanket? You need to know the tips and tricks in cleaning one to give you peace of mind.

Often, no matter how much we keep our silk blankets from the dirt or dust, we still cannot avoid getting them dirty.

There are three easy ways to clean your silk blanket. These can help you to wash them without even damaging them.

Continue reading this article to know more about how to fly, protect, and store your silk blanket properly!

 

how to wash silk blanket

3 Methods In Washing Silk Blankets

Most of the time, we tend to take care of our blankets so much, but we cannot control and avoid our kids from being so hyper that they eventually drag it all over to the dirt. You also might be having a midnight snack while enjoying the comfort of your silk blanket and accidentally spilled some drink or spread it over it.

In this situation, the first thing to keep in mind is to not machine wash your silk blanket. The silk may become stiff and snag, which ruins the benefits of your comforter.

Depending on how dirty your blanket is, there are three ways to wash your silk blanket. These are S=sun curing, spot washing, and professional cleaning.

 

Method #1. Sun curing

In sun curing, the body oils that your silk blankets may have soaked up are dried up. Your comforter will be able to maintain its pristine condition, as long as there are no harsh chemicals applied. These could harden and snag the threads of your silk blanket.

You must keep your duvet cover on your comforter if ever you have one. If none, you can use a tarp or an old sheet as an alternative. This protects it from debris or dirt from the outside.

You can lay it on the ground to get direct sunlight for at least an hour. Then, you may flip it to the other side and repeat the process.

Moreover, if you don’t have enough time to wait for at least 2 hours, you can toss it in the dryer on low heat. Keep in mind that it should not be more than 30 minutes because the heat can tear up the fabric and damage it.

 

Method #2. Spot washing

Spot washing is most applicable if you have ever spilled a drink in your blanket. All you need is warm, soapy water and a sponge.

You must soak the blanket in the warm, soapy water and wring the sponge out of the sink until most water is gone. You may continuously dab the stained side with the sponge, and to finish, let it air dry.

 

Method #3. Professional cleaning

This is needed for silk blankets that require deep cleaning. You may find a dry or wet cleaner that specializes in washing silk blankets for you to have the best outcome without damages.

 

How to protect my silk blanket?

A duvet cover is critical because it helps in protecting your silk blanket. With this, your silk blanket will never have to be attached or have contact with your body while you are using it. It will never have to soak your sweat up or the body oils you make naturally.

You can keep your silk blanket clean regardless of how many times you have used or stayed under it. However, if you do not want to use a duvet cover because you want to feel the silk blanket on your skin, do not worry because there could be an alternative.

If you want to feel a soft blanket on your skin and protect your silk one at the same time, you may use a bamboo duvet cover. Bamboo duvet covers are washable, durable, and luxurious. It is sometimes considered to be softer than cotton too.

 

How to store my silk blanket?

Your silk blanket is no doubt a provider of warmth, especially in winter. However, if it is almost summertime,  you might not need it so much anymore. You may be wondering how to store or where to store your silk blanket by this time.

In storing your silk, start airing out your comforter. After this, neatly fold and place it in a bag where it is comfortably fitted.

You may also toss a couple of silica beads to absorb moisture. Cedar balls may also help in repelling bugs.

The bag should be ensured to be air-tight when closed. Lastly, is to store it in a cool, dry place.

 

Conclusion

Silk blankets are known for being thin but are excellently breathable. However, do you know how to wash silk blankets? There are three ways to clean it, and you can easily do it at home.

There may be many tips in protecting, cleaning, and storing your silk blanket, but all of these will help you avoid damaging your most loved blanket. It would be best to keep in mind the essential types of cleaning a silk blanket based on the dirt you want to clean.

Storing it when you don’t need it anymore is also necessary to preserve the quality of your blanket.

how to machine quilt a baby blanket

How To Machine Quilt A Baby Blanket: Basic 3-Step DIY Guide

Babies love soft things. If you’re a quilter with a little one, it’s essential to know how to machine quilt a baby blanket for them to snuggle with.

You’ll need a sewing machine, quite a few fabrics, and some patience. If all goes well, your baby will bask in the comfort of a newly quilted blanket in no time.

 

How Do You Machine Quilt A Baby Blanket?

Whether it’s your first time quilting or you need a recap, you need to invest in different fabrics for all the blanket parts.

To start, you’ll need the main fabric that will serve as the centerpiece of the blanket. Regarding measurements, the average starting size for a baby blanket is 40 to 42 inches, so you need the fabric to measure around this range.

You’ll also want a fabric for the backing or reverse side. The material will serve as a good complement for the main design or pattern. Measurements around 1 and ¼ to 1 and ½ yards should suffice.

Next is a binding fabric. This material will help hold the blanket together. You’ll need around 1/3 to ½ yard of this.

You’ll also need batting. The purpose is to ensure the blanket is soft and comfy on the inside.

Forty-two inches is a suitable measurement. Remember, the quality depends on the material, so decide what kind of batting will suit the baby. Last but not least, you’ll need pins, of course.

You might be thinking of pre-washing the fabrics before you start the project. It’s a good idea, no doubt, but many high-quality fabrics are color-safe. You won’t have to worry about pre-washing too much.

 

Step #1: Sandwich the materials

Start with the backing fabric. You probably have already noticed that its size is slightly bigger than the main fabric.

The reason for this is you start machine quilting from the blanket’s top, and everything beneath can move a bit during the process. If your backing is bigger than everything else, it won’t come off smaller than the front by mistake.

Lay the backing flat on the floor. When it’s all smoothed out, place the batting in the center. Repeat this with the main fabric.

Make sure they’re all appropriately centered. You should be able to see all three layers of this “fabric sandwich.”

From here, you can use pins to keep them in place.

 

Step #2: Stitch the layers

At this point, you can now let the machine do the work. Stitching is also the part where you get creative.

It may seem like you’re just trying to stitch the three layers together at first glance. However, the beauty of quilting comes in here as you can decide how the stitches will look on the quilt. This kind of creative control is why there are many ways to stitch a quilt.

When you’ve finished stitching, you don’t stop there. Remember the binding fabric?

 

Step #3: Bind the quilt

Binding is a rather tricky task. With a bit of patience, you’ll get the whole blanket finished and looking good.

Cut out the binding fabric into strips that measure 2 and ½ inches x the width of the blanket. Sew all the strips together by the shorter sides. Fold the result in half and press it down.

You can start pinning the binding on the blanket starting from the middle of one side. Make sure to place the binding on the front side. Start gradually pinning the binding to the side of the blanket.

When you reach a corner, stick a pin and fold the binding 45 degrees opposite the adjacent side. Fold it back into itself so that it aligns with the adjoining side and stick another pin. You should see a triangular flap on the corner.

When you reach the starting point, take both ends of the strips and fold the ends down. Don’t forget to pin both folds down.

Make sure the two ends still meet. You may want to press this part with an iron to make the folds crease.

Cut off any excess to about ¼ inch from the folds. Take off the pins, match the strips’ right sides, fasten with a pin again, and sew a seam on the crease. Open the fold, press it down, refold it, and pin it back again.

Now you can start sewing the binding in place. Start sewing with a ¼ inch allowance, removing pins as you go.

When you get to the flaps, stop when you’re ¼ inch away. Rotate the blanket and make sure the flap is in the opposite direction. Sew the next seam by the edge of the last side.

Once you’ve finished sewing, fold the binding over to the back. At this point, you’ll have to sew it to the backing by hand.

There you have it! Once you see how the blanket has turned out, you can congratulate yourself for a job well done.

 

Conclusion

Quilting sure is challenging, but who doesn’t love a challenge? It’ll be worthwhile once the lucky recipient feels nice and cozy rolling around in it. Now that you know how to machine quilt a baby blanket, your little one will be in for a treat!

Leave a Reply

Your email address will not be published. Required fields are marked *

[mailpoet_form id=”2″]