Sewing 101: How Many Yards Of Fabric For A Throw Blanket

The question “how many yards of fabric for a throw blanket” may have popped in your head at least once. You might be wanting to make a throw blanket but do not know the complete set of materials needed.

Worry no more, because we will mention the materials you need in making a throw blanket and its sound characteristics.

Size matters depending on the type of person who will use the throw blanket. It may be for a baby or an adult.

Continue reading this article to know more about how many yards of fabric you need to make a throw blanket and why you should make one!


how many yards of fabric for a throw blanket

How Many Yards Do I Need To Make A Throw Blanket?

If you buy a ready-made throw blanket in stores, it is usually about 60 inches long and 50 inches wide. If you are looking for a throw blanket for a baby, it is primarily about 2 yards.

One skein of yarn may be enough for tiny babies, but it may require three or more for bigger ones.

The standard size requires one and a half yards of two pieces of Deluxe fleece, one for the front and the other is for the back. Meanwhile, two and a half to 3 yards can be perfect for twin throw blankets.

Overall, the average size of a throw blanket is 50 inches by 36 inches.

Sometimes, it may be better to make it wider than usual depending on your preference and where you will be comfortable.


What is the difference between a blanket and a throw?

It may not be evident whether to settle with a blanket or go with a throw most of the time.

There are many similarities between the two, such as providing warmth or adding decor to the room or sala. By knowing the differences these have, you may think smarter of what blanket you need.


Size matters

Typical blankets are based on the size of the bedding dimensions. They can come in sizes referred to as twin, king, or queen mattresses.

When it comes to throw, it can be based on who will be the one to use it or follow the average size, which is 50 inches by 36 inches. A throw blanket is usually made for one person only, while two people can use a blanket.

Blankets are generally used to keep the bed warm, too, because they can reach the ends of the beddings, unlike throw. Still, throw blankets have their particular functions.


Materials and design

These two are using different materials, and they also have different designs.

When it comes to blankets, they are mostly made from one large piece of fabric, whether wool, flannels, or fleece. However, throw blankets tend to be made of luxurious material such as faux fur, chenille, satin, or crushed velvet.

More people go for a throw blanket because they feel that it gives a cozier feeling than a typical blanket, especially in common areas like in the living room.



Typical blankets are not for decor. It has only one job, which is to provide warmth to the user. Throw blankets are the ones that are used as decors.

They are used for their decorative properties, mainly when they are not used for keeping someone warm. This is usually designed and placed in the living room or at the corner of your bedroom.


What are the characteristics of a good throw blanket?

A good throw blanket makes it convenient for you to move around. Unlike a typical blanket, a throw blanket is just right about your body size.

That is why you can quickly wrap it around you as you move around the house without being shrouded in an overwhelming height of fabric that can be dragged on the floor.

It can also serve as your accent piece in compliment to your interior design. There is an advantage because it is available in a variety of colors.

It is an incredible design tool that can easily give a refreshing look to your rooms too. Most people purchase this because of its dual purpose.

Compared to a typical blanket, it might be more expensive, but it depends on the user’s priority.

It is also an excellent protective cover. The reason for this is because it can easily be washable.

If you have pets, they usually shed fur on your couch or anywhere else. Throw blankets can help in lessening your problems with these.



Having a throw blanket seems to be a must. It’s time to answer the question, “how many yards of fabric for a throw blanket.”

This article can serve as your guide to a beautiful journey of having your throw blanket!

Just remember to know the accurate size for the person who will use it. It is also essential to know the type of fabric that best suits your taste.

Having a throw blanket has many benefits that you can use as an advantage to your living room or have a cozier environment.

how to machine quilt a baby blanket

How To Machine Quilt A Baby Blanket: Basic 3-Step DIY Guide

Babies love soft things. If you’re a quilter with a little one, it’s essential to know how to machine quilt a baby blanket for them to snuggle with.

You’ll need a sewing machine, quite a few fabrics, and some patience. If all goes well, your baby will bask in the comfort of a newly quilted blanket in no time.


How Do You Machine Quilt A Baby Blanket?

Whether it’s your first time quilting or you need a recap, you need to invest in different fabrics for all the blanket parts.

To start, you’ll need the main fabric that will serve as the centerpiece of the blanket. Regarding measurements, the average starting size for a baby blanket is 40 to 42 inches, so you need the fabric to measure around this range.

You’ll also want a fabric for the backing or reverse side. The material will serve as a good complement for the main design or pattern. Measurements around 1 and ¼ to 1 and ½ yards should suffice.

Next is a binding fabric. This material will help hold the blanket together. You’ll need around 1/3 to ½ yard of this.

You’ll also need batting. The purpose is to ensure the blanket is soft and comfy on the inside.

Forty-two inches is a suitable measurement. Remember, the quality depends on the material, so decide what kind of batting will suit the baby. Last but not least, you’ll need pins, of course.

You might be thinking of pre-washing the fabrics before you start the project. It’s a good idea, no doubt, but many high-quality fabrics are color-safe. You won’t have to worry about pre-washing too much.


Step #1: Sandwich the materials

Start with the backing fabric. You probably have already noticed that its size is slightly bigger than the main fabric.

The reason for this is you start machine quilting from the blanket’s top, and everything beneath can move a bit during the process. If your backing is bigger than everything else, it won’t come off smaller than the front by mistake.

Lay the backing flat on the floor. When it’s all smoothed out, place the batting in the center. Repeat this with the main fabric.

Make sure they’re all appropriately centered. You should be able to see all three layers of this “fabric sandwich.”

From here, you can use pins to keep them in place.


Step #2: Stitch the layers

At this point, you can now let the machine do the work. Stitching is also the part where you get creative.

It may seem like you’re just trying to stitch the three layers together at first glance. However, the beauty of quilting comes in here as you can decide how the stitches will look on the quilt. This kind of creative control is why there are many ways to stitch a quilt.

When you’ve finished stitching, you don’t stop there. Remember the binding fabric?


Step #3: Bind the quilt

Binding is a rather tricky task. With a bit of patience, you’ll get the whole blanket finished and looking good.

Cut out the binding fabric into strips that measure 2 and ½ inches x the width of the blanket. Sew all the strips together by the shorter sides. Fold the result in half and press it down.

You can start pinning the binding on the blanket starting from the middle of one side. Make sure to place the binding on the front side. Start gradually pinning the binding to the side of the blanket.

When you reach a corner, stick a pin and fold the binding 45 degrees opposite the adjacent side. Fold it back into itself so that it aligns with the adjoining side and stick another pin. You should see a triangular flap on the corner.

When you reach the starting point, take both ends of the strips and fold the ends down. Don’t forget to pin both folds down.

Make sure the two ends still meet. You may want to press this part with an iron to make the folds crease.

Cut off any excess to about ¼ inch from the folds. Take off the pins, match the strips’ right sides, fasten with a pin again, and sew a seam on the crease. Open the fold, press it down, refold it, and pin it back again.

Now you can start sewing the binding in place. Start sewing with a ¼ inch allowance, removing pins as you go.

When you get to the flaps, stop when you’re ¼ inch away. Rotate the blanket and make sure the flap is in the opposite direction. Sew the next seam by the edge of the last side.

Once you’ve finished sewing, fold the binding over to the back. At this point, you’ll have to sew it to the backing by hand.

There you have it! Once you see how the blanket has turned out, you can congratulate yourself for a job well done.



Quilting sure is challenging, but who doesn’t love a challenge? It’ll be worthwhile once the lucky recipient feels nice and cozy rolling around in it. Now that you know how to machine quilt a baby blanket, your little one will be in for a treat!

Leave a Reply

Your email address will not be published. Required fields are marked *

[mailpoet_form id=”2″]