Welcome to the Krostrade Marketplace, please excuse our appearance, we are still under construction.

How To Wash A Heated Mattress Pad? Best 2-Step Guide

You can master how to wash a heated mattress pad in two simple steps. It’s important that you understand the right way to clean your heated mattress pad to avoid damaging it and also for your safety. Nonetheless, it’s not something to be intimidated by and you can easily include it in your bed sanitation maintenance. 

Compared to memory foam mattress pads, cleaning a heated mattress pad requires checking and preparation. The good news is you can use the washing machine to clean it safely and effortlessly. If you want to know more tips, read on!

 

How To Wash A Heated Mattress Pad

How To Wash A Heated Mattress Pad Safely

 

Step #1. Prepare

A heated mattress pad works because of the coils inside that use electricity to heat them. Therefore, you must always turn the pad off and unplug the cord before doing any cleaning. You also want to remove the cord from the plug itself. 

Much like with heated blankets, you have to inspect your heated pad regularly to ensure that are no broken parts. Use this opportunity to check the wires as well. Once everything is good, fill the washing machine with lukewarm water and mild laundry detergent at the most gentle cycle. 

Do note that it’s better to check the specific unit’s label you’re using to know the compatible products and practices for cleaning it. 

 

Step #2. Pre-soaking, washing, and drying

You can now pre-soak your mattress pad for 15 minutes in the washing machine and then do the washing cycle for only 2 minutes. Drain and rinse the pad in cold water in the machine before spin-drying. Finally, use the lowest heat setting of your dryer for two minutes to preheat the machine and then dry the pad for 10 minutes inside. 

Finish the drying process on your clothesline by draping the pad over it to ensure that the air and heat outdoors will reach all sides. And that’s it! Just remember that you should only use the pad and plug it in if it has dried thoroughly. 

 

Can You Wash The Cover Of A Heating Pad?

Since you can wash the pad itself, then it’s even more possible to wash its cover. Most people prefer spot cleaning the cover to target the stains and dirty areas more efficiently, but you can also handwash for deeper cleaning and removal of trickier stains. Depending on the cover you use, it might even be possible to use the washing machine to clean it. 

For this method, use the machine’s small load and cold water with mild detergent. You can add other items with the cover as long as they won’t stain each other. Finally, air-dry the cover since using a dryer can shrink the material. 

 

Can You Put A Heating Blanket In The Dryer?

You can place a heated mattress pad in the dryer but only in the lowest heat setting as you have just read. What about a heating blanket? Again, you have to check the label and see if the manufacturer has particular indications. 

You can generally place a heating blanket to dry it partially in the dryer’s cool or heat-free setting. Using something too high can damage the wires or even shrink the material. And speaking of which, the dryer should have enough space for the blanket to tumble to keep it from getting twisted and affecting the wires. 

After you put it in the dryer for 20 minutes, take it out while still damp and finish the drying on your clothesline. It should be common knowledge never to use the heating blanket while it’s still wet for your safety. More so, never iron your heating blanket even if it got wrinkled since gravity will smoothen it for you. 

 

How to wash a heating blanket?

Washing a heating blanket is quite similar to what you’ll do with a heating pad. You’ll remove the cords and then ensure that you’ve spread the blanket evenly inside. If needed, add some sheets inside to balance the load. 

Use cool or warm water with a mild detergent at a short cycle and reduce to the final spin’s lowest setting. After two minutes, let the blanket undergo the rinse cycle. If you don’t have a washing machine, you can handwash the blanket in your bathtub.

 

How Do You Clean A Sunbeam Warming Throw?

If you’re using a specific brand like Sunbeam, cleaning it should follow the manufacturer’s requirements. This means soaking the throw in cold water and gentle soap for 15 minutes before washing it for two minutes at a gentle cycle. Once done, rinse with cold water and spin dry in the washing machine. 

You can then air-dry on your clothesline or in the dryer. For the latter, preheat your unit for two minutes and tumble dry the throw for 10 minutes. Finally, get the damp throw and finish the drying outdoors without using clothespins. 

 

Conclusion

The warmth and coziness added by a heating pad improve sleep. However, do you know how to wash a heated mattress pad? It will also get dirty eventually, so be mindful of the correct practices for cleaning. 

The process is straightforward and quite common knowledge. Unplug and remove the cord, use the gentle cycle in the machine, and only use it after the pad dries completely. 

how to wrap a mattress for storage

How To Wrap A Mattress For Storage? 7 Easy Steps!

Have you ever wondered how to wrap a mattress for storage? Well, there are six simple steps to do it.

The quality of a mattress is essential, especially if you invested a good amount of money.

A good quality mattress can last 10 to 20 years, depending on how you took care of it.

Maybe you want to upgrade your bed from a bigger one because you just married or the kids want to have a spacious bed.

You don’t want to dispose of the old ones because the mattress condition is still good.

Yes, you can keep it!

With the proper way of storing the mattress, you can still enjoy its usage in the future.

Keep on reading this article, and you will discover the proper way to store the mattress in just a simple way.

 

Steps To Wrap A Mattress For Storage

These are the steps in wrapping a mattress for storage that will help you save your time, effort, and money you invested in your bed.

So, how to wrap a mattress for storage?

 

Step #1.  Air out the mattress and clean it thoroughly

The following steps will prepare you to make the mattress ready for storage.

There are so many ways of doing this, but here you will know the easiest way.

You first need to remove all the beddings, then take off the mattress from the bed frame.

Soda is good in removing odor, so dust the exterior side with soda and let it stay longer to absorb some stubborn odor.

Vacuum the soda particles an hour after you sprinkled.

Then air out the mattress for a few more hours before wrapping it out.

 

Step #2. Wrapping in a mattress bag

Use not-so-thick plastic to avoid moisture to trap from within that may damage the mattress.

Wrap the mattress in plastic and securely sealed it with packing tape.

It prevents moisture from coming in or settling within the fabric that can cause damage to the exterior portion of the mattress.

Suppose you are planning to store it a bit longer.

Secure a quality plastic bag to ensure that the molds will not develop and will be kept dry.

For prolonged storage, check it twice a year or as often as you can to air out the mattress and make sure that it is kept dry.

Reseal it again.

 

Step #3. Use a covered truck

In moving or storing from a different place, use a covered truck to shield from dust or bad weather during transport.

You may cover it with a cloth to ensure that you will not expose the mattress to dirt.

It is okay to position the mattress on its side.

Instead of laying down and piling up your things on top of the mattress, putting it on its side gives more space for the other stuff.

Never put the mattress on top of your car. It is too risky, and there is a tendency that it will fold.

Once the mattress folds, it damages the entire shape, for it will not return to its original structure.

 

Step #4. Storing the mattress

It is okay to position the mattress on its side during transportation only but not during a long period where you plan to store it temporarily.

Better lay it flat on the floor to maintain the correct position of coils, inner foam.

Wrong positioning will disfigure the mattress.

 

Step #5. Keep off

When the mattress lays down flat, never put anything on top of it.

Mainly heavy objects for it could damage the whole of it.

Are you worried about the space?

It is better to put the mattress last, on top of everything where it is flat, like a pallet or rigid cabinet, so that you can arrange the bed on a flat surface.

 

Step #6. Correct storage place

The basement is the number one place to store everything but be aware that the basement temperature can damage the mattress if stored for an extended period.

Considering storing it in a place where there will have temperature control during climate changes.

For temperature change can create molds that can damage your expensive mattress.

 

Step #7. Receiving mattress

When the time comes that you need it, pull it out of the storage.

Just follow the first step during the storage.

It would help if you still had a soda to eliminate the odor during the long period of storage and disinfecting it at the same time.

With that, the next time you want to keep or move your mattress, make sure that its quality will not be ruined by doing it correctly.

 

To Wrap It Up!

Amazingly, you know now how to wrap a mattress for storage!

Just simple steps to follow that will save you time and money.

So why worry about moving up or upgrading your mattress.

There’s no need to give up the old ones.

With proper handling in storage, you will indeed preserve the value of your lovely mattress.

Who says that it needs too much effort?

It never is a big deal at all.

It is self-fulfilling that you save the mattress that you brought with your hard-earned money.

Try to save your mattress first before disposing of it!

Sign up to our newsletter!