What is a swivel base and how does it work? A swivel base is a rotating part on the bottom of your Lazy Boy rocker recliner that allows you to turn in any direction. The reason for this feature is so that you can always find the perfect position to relax while sitting or reclining in your Lazy Boy.
The tutorial below will show how to uninstall a swivel base from lazy boy rocker recliner.
Steps on Uninstalling a Swivel Base From Lazy Boy rocker recliner
Step 1. Place the rocker recliner on its back and use a wrench to remove the bolts that secure it.
Step 2. Locate all four mounting holes in the swivel base, two of which are perpendicular to each other for screws while another two-run parallel to one another.
Step 3. Insert your Phillips screwdriver into both sets of screws and turn them clockwise until they no longer move.
Step 4. Remove the entire base from beneath your Lazy Boy using strong pliers so you can pull out any trapped wires or cables and then replace them with a new swivels unit (if applicable).
You may need help installing this part if you do not have experience working around wiring. Consult an expert before taking anything apart! Make sure you double-check the screws to make sure they are tight.
How do you Take the Back Off an Ashley Recliner Sofa?
Most Ashley recliners are made with a swivel base. The back of the sofa can be removed to access the screws and bolts that hold it in place, but how do you take off one of these bases? Follow these steps:
Step 1. Locate the four Phillips head screws on each side and remove them using your screwdriver.
Step 2. Lift the back of the recliner off and set it aside. You will then be able to access how to remove a swivel base from an Ashley sofa that way.
Step 3. Remove any debris or dirt inside before continuing with your installation process. Place the new base back into position and secure it with four screws on each side.
How do you Take Apart a Lazy Boy Sectional?
First, open the recliner and place it on a flat surface. Take out any loose cushions or blankets that may be inside of the chair. Find one side of your sectional and look for screws that have been drilled into the frame from beneath each footrest arm.
Remove these screws using a Philips screwdriver by turning them counterclockwise until they are no longer tightened in their holes.
After removing all four screws- two at either end—you should see how to take apart a Lazy Boy sectional with as minimal damage as possible! Now you just need to find where those pesky wires and cables are connected onto this base unit so you can remove it without tearing anything up too much (or worse: electrocuting yourself ).
How do you move a heavy recliner?
Most people can move a recliner with the help of another person. The two easiest ways to do this are by placing it on its back and sliding it or lifting and carrying it upside down with one hand holding each sidearm.
Where is the best place to put my recliner chair?
Don’t forget that how you position your recliner about the television affects how comfortable you will be watching TV while relaxing from behind!
If possible, avoid positioning yourself directly across from where your TV is mounted- try putting as much space between them as possible for optimum viewing comfort.
Positioning your sectional so that there isn’t too far a distance between you and the television also helps keep cables out of sight without having to hide them.
How do you Tighten a Loose Recliner?
If you have a recliner with a loose mechanism, there are some things that you can do to tighten the mechanism.
First of all, make sure your chair is not positioned too close to any appliances (especially those which produce heat), as this will cause the wood inside of it to expand and loosen its grip on other pieces; when positioning your recliner about how far away from an appliance it should be, keep in mind how much space they take up – if possible don’t place furniture around them at all!
If you’re using one such piece for storage or something else and find yourself unable to move it out of reach of your sectional while still being able-bodied enough to safely position it without assistance, try placing small rugs under the legs to keep them from being heated.
How do you remove the back of a recliner sofa?
The back of a recliner sofa may be removed by unscrewing the screws that hold it in place. It is important to note how many screw holes are present on your furniture, as there should only be one or two at either end.
You may also find wire connections beneath the frame which must not be disconnected while removing the cushion and coverings from the chair.
It’s best to use an electric drill with a Phillips head attachment when drilling these screws out so you don’t strip them using just muscle power alone if they’re in particularly tight spots or have been secured for some time.
With all four (or six) legs now detached, carefully remove any wires before lifting them and sliding off any remaining bits of fabric/covers from the frame.