How to put oil in air conditioner compressor? Is your air conditioner’s compressor running out of oil, yet you do not know what to do? Well, what people do is oil their AC unit’s compressor.
Yes, there may be many ways to accomplish this task, yet are you sure that they will be effective when you apply them in your situation?
It’ll be a problem if you come home tired after a long day of working and this is the first thing that you encounter all the time.
Because we know that you’re tired, I think we can help you resolve that problem with ease and no worries to avoid you being uncomfortable from the heat.
Of course, we don’t want that to happen, so this article is specially made for people suffering the same problem as yours. To resolve that, we will discuss the topic further to understand what point we refer you thoroughly. Keep on reading to know more about this topic.
Putting Oil In An Air Conditioner Compressor
You discovered many methods that can easily be found online, being contributed by a lot of people. And there is no need to drive for hours or minutes to your local store.
Below are steps that you can follow to carry out this task; we made it as easy as possible since not everybody is willing to do some heavy works. Also, before doing things, always wear protective gear from the start to protect yourself if there is a problem that’ll happen unexpectedly.
It is for your good, so make sure to keep these in mind and do not forget them as they may be applicable at some point. After this, rest well and be ready for the next day of working or doing anything. Regardless, here are the steps on how to put oil in air conditioner compressor:
Step #1. Removing the air conditioner’s compressor
Before doing anything to your air conditioning unit’s compressor, make sure that you have already purchased the correct oil needed from a trusted manufacturer. Applying the wrong oil may cause your AC unit to malfunction and break on its own and damage the internal parts without you noticing it happen.
Now we’ll start the steps of removing by first locating the compressor and its protective cover; you’ll want to remove the screws that are used to mount. The compressor’s cover so that you could take it off easier later than using a wrench takes it off from it. You’ll then want to loosen the belt, which can be seen on the unit’s compressor.
Once you’ve taken off the belt from it, you will need to disconnect the plastic wire that connects the power supply to your unit to change your oil safely. Do this by simply grabbing it from the appliance and pull it off so that you’ll remove it.
To finish this step and remove everything that blocks the way, remove the pressure lines. Now to do this, get rid of the bolts that connect the AC. And separate both of them from its valve.
Step #2. Capturing and removing the Freon
This step isn’t essential to do, though it is relevant to changing your compressor’s oil. You can do this by using a reclaimer machine, connecting its gauges to where the Freon or refrigerant is, and putting on the ports in the right place to avoid the hassle.
You’ll have to double-check everything to ensure that the refrigerant doesn’t escape, or else its effect on the environment will have a significant impact.
Now switch on the machine and wait until the gauges on the device have dropped to zero. Close and remove the valves once you’re finished, then switch off the machine to ensure no refrigerant escapes.
Step #3. Adding the compressor oil
Lastly, to successfully change the oil, take off the compressor from the unit by using screwdrivers to remove the bolts that are holding so you can pull it. Make sure that you’ve pulled out everything, including the wires, belts, and lines, to ensure that there will be no casualties.
Now, using your hands, remove the compressor’s cap and let all of the old oil run out of the component and into a suitable container until it is empty. Once it is all removed, use a funnel and proceed on pouring the oil onto the slot. Put back the cap in its respective place and secure it so that it doesn’t remove easily.
Step #4. Reinstalling everything
Reinstall the compressor back onto its slot and make sure to tighten it by using a wrench. Recharge the Freon afterward using the machine earlier. Install all of the wires in their proper locations, ensuring they are secure and tight enough to hold.
Conclusion
And now that you’ve read all the steps, that is how to put oil in air conditioner compressor. There are several ways to replace the oil that you can find on the internet today, and one of them is our method which you can use to apply.
But if this doesn’t work for you, consider calling a professional to get the job done without any worries. It may be costly, but it will surely fulfill your expectations.