How To Put Baby In Nuna Pipa Lite Car Seat

The Nuna Pipa Lite car seat is a great investment for any parent looking to buy high quality and safe baby carrier.

It has been designed to let babies face out, which makes it easier for them to see their surroundings and interact with the world around them. This guide will show you How To Put Baby In Nuna Pipa Lite car seat.

How To Put Baby In Nuna Pipa Lite Car Seat


How To Put Baby In Nuna Pipa Lite Car Seat

Nuna’s Pipa Lite car seat is a new product, released in early 2019. It looks like the older model of this kind of baby carrier, but it has some important differences that make it worth considering if you are looking for an infant car seat. 

The first step is placing the base down inside your vehicle. The process should be exactly as you would do with any other type of car seat: slide one end under either side belt and then click into place at both sides so that they can not move or shift around during transport. 

Then adjust its height by pulling the handle up or down so that your baby’s head is at a 90-degree angle to his or her body. 

Next, adjust the front and back arm straps to fit around your child by pulling them outwards from either side of their shoulders until they are tight enough for you not to pinch any skin while putting on the harness.

The next step is attaching it into place in an upright position. You can do this with one hand since there is only one clip on each side of the carrier, which makes things much easier than trying to use two hands as some carriers require.

First, slide each strap over both legs just below where they rest against your belly button (the instructions say above but I find this uncomfortable).

Then buckle together all three straps to secure the carrier at their midpoint. The final step is clipping each leg into your child’s crotch buckle and adjusting as necessary.


What is the infant insert in the Nuna PIPA?

The infant insert in the Nuna Pipa is a three-way adjustable seat that provides the ultimate comfort for your baby. It can be used as rear, forward-facing, and flat position support so you won’t have to purchase another car seat once your child grows bigger.


Do You Need Infant Insert For Nuna Pipa Car Seat?

Yes, you need an infant insert for the Nuna Pipa car seat. It is a great accessory to have as it gives your baby extra protection and safety in the event of an accident or sudden stop. 

The safe cell technology used by Nuna provides an excellent impact absorption mechanism that prevents babies from being thrown around inside a car during a collision or sudden stop. 

The pocket system also includes two adjustable head huggers which can be adjusted easily with one hand without having to re-thread through harness loops every time you want to adjust them.


When Can I Stop Using Nuna Pipa Infant Insert?

Nuna Pipa infant insert can be used until your child is 12 months old and weighs 18 pounds. If you have a child that has not reached this milestone, consider using the Nuna Kalle car seat instead of an infant insert for lightweight travel.

The Nuna Kalle car seat provides all-around protection from birth to approximately four years of age or 40 lbs., whichever comes first with use in a rear-facing position only.


How Long Can Baby Use Nuna Pipa Lite?

Nuna PIPA Lite can be used for up to 30 lbs. This means that it is suitable until your baby reaches the age of around three years.  


How Do You Loosen Nuna Pipa Lite Car Seat Straps?

PIPA Lite straps can be loosened by pulling the metal loop located on each strap. The seat belt will remain connected to your car but loose enough so that you can remove the baby from it.


How Do You Put Nuna Pipa Cover Back On?

You can easily put the cover back on by following these simple steps:

  • Lay the Nuna Pipa flat.
  • Position the new replacement cushion and gently pull the fabric over it to secure it in place. Make sure to smooth out any wrinkles or loose threads from the old cover before placing a new one on top of the fabric. 
  • Then, press down lightly around the circumference of the seat to help lock zipper teeth together so they don’t pop open while you are carrying your baby/child in their car seat.
  • Maintain pressure for about five seconds after zipping up all three sides until you hear a clicking sound that states that the closure has been secured properly.


How Do I Remove The Nuna Pipa Lite Car Seat From The Base?

To remove the Nuna PIPA Lite car seat from the base, push down on both sides of the red release buttons until they click. Once you hear them snap into place, lift up to remove them fully out of the vehicle.

To re-install simply set your child in their car seat and align with either side of your base’s front bar then press until it clicks.

Leave a Comment