Door curtains are a wonderful and easy way to add natural, cozy warmth into any room of the house. Whether hung before an interior doorway or in front of French doors overlooking outdoor views.
These window coverings will bring comfort wherever they go because their light-blocking fabrics block harmful UV rays from entering inside while simultaneously radiating heat back outwardly toward occupants within. You will learn in the article; you will learn how to make door curtains.
To proceed, you will need the following materials
- Sewing machine or needle
- Curtain Fabric
- Pole and
- Matching thread
- Brackets for hanging.
Step #1: the first step on how to make door curtains is measurement. First, you need to hang the bracket on a wall at the height that suits you best to measure for your curtains. Then find out how wide your door is and where you want it to fall from the top of the rod down (the “drop”).
Step #2: Make sure to cut the curtain from a single fabric, adding 6cm for the top of the curtains and 7 cm for the bottom hem. In total, you should add 14 centimeters when cutting each side’s length- this will give an even drape that falls without any wrinkles or bunches in front of your window.
Step #3: To hem the edges, fold under each side by 7cm and then press. Fold in again along an inch or two of fabric at a time for stitching before removing pins one by one as you go to keep your stitches straight.
Step #4: Another important step on how to make door curtains is cutting. To cut the channel for your curtain pole:
- Get a measurement of how much is needed around to fit.
- Add 6cm onto that and then press down those measurements with an iron before turning over 2cm.
- Pin it together and sew on top at 1mm from where you folded under so there isn’t any excess fabric hanging out everywhere in between the curtains when they are open, which might make them clumsy.
Step #5: You’ll first need to remove the brackets from the wall by lifting on them and pulling them away. Thread one end of your pole through at the top opening on either side of your window or door frame.
Then position this above where you want to hang your curtains so that there is enough room for both ends when they’re hanging down. Once done, threading each bracket onto its corresponding hook will be straightforward!
Step #6: Rip the curtains off of their poles. Pin them by folding 2 centimeters over at the bottom, and make sure that it’s straight before you sew so that there are no visible seams on your curtain.
Step #7: the last step on how to make door curtains is finishing up. It is important to thread the finished curtain back onto the pole. Turn up and pin down, mitering for neatness.
Hem by hand or a machine, blind stitch this in place securely until you remove pins as you go along removing them. Hang again when done with your work of art!
How Many Yards do I Need to Make a Door Curtain?
The best thing about curtains is that they can be made from any fabric, and the possibilities are endless. Every time you make a new curtain, it should have 2½ times more width than your heading will need to allow for fullness on both sides of the window (depending on how wide you want the headings).
If this isn’t possible due to size constraints or limitations with material thickness, use 1 ½ yard instead.
How do I Hang a Curtain on a Door?
When you have an entryway with a sidelight window, it cannot be easy to figure out how to hang curtains. Mount your curtain rod over the door and then extend its hardware 1 foot past either side of the doorway so that there is enough space for two fabric panels on each side.
The first panel should push right when opening or closing, which will expose one half of the entrance while remaining covered by another panel at all times!
What are Door Curtains Called?
The door curtain is called portière. The portière is a curtain used to cover the doorway to provide separation between rooms. The word comes from French and means “door.” A rising portiere is often called for when there are no doors separating spaces due to its inherent functionality; it provides both privacy and light control while still keeping open floor plans free of obstruction.
What are Alternatives for Door Curtains?
The roman blinds
There is no doubt that the classic look of Roman blinds is a wise choice. It provides an elegant aesthetic, but when combined with luxurious fabrics for a fraction of the cost and thermal lining to add insulation, they become energy efficient too!
The Matchstick blinds
This type of home treatment has a very natural and relaxed feel. They are an ideal way to add texture and warmth to any décor scheme, but they work particularly well with neutrals.
When closed, they filter the light beautifully by making it more diffused, which is why this type of window covering works especially well for those who prefer softer color palettes in their space or anyone looking for some privacy from outside onlookers without blocking out all daylight completely.
The Café curtains
Café Curtain is a wonderful way to create privacy in the room. It can also be used with conventional curtains if you want both types of window treatments, and there are some disadvantages as well.
For example, these café curtains provide an excellent solution for those with windows that need light but cannot stand too much exposure during daytime hours because they block out excess sunlight without blocking visibility from outside completely or drastically changing perceived brightness levels in your home.
Conclusion
So you made it to the last, and I believe this write-up has widened your horizon on how to make door curtains. You will realize the steps are simple and easy.
You don’t need professional experience before you can learn how to make door curtains. Just follow the steps on this guide, and you are good to go!