Do you want to know how to make cornice board curtains?
Every individual has their unique style on how to make things look good even at home.
Some do it by adding curtains to make it look even better, and some don’t.
It usually depends on your preferences.
But one way to make it look even better is by adding cornice boards to the curtains.
Cornice boards are mainly used to hide window treatment hardware and can also be used for adding designs to go on with the curtains.
It is just a bit of info for you on the ways or steps on how you can make cornice board curtains.
These are some simple steps that you might want to follow to make your experience at home better.
Steps To Make Cornice Board Curtains
Curtains are a must-have’s in one’s home. They provide the cover that you need from heat and also comes in different designs.
They can be used in many different ways, just like protecting preventing dust from getting into your rooms or as a decoration.
The aesthetics of curtains are nice and all, but we can help you make it look even better with the help of cornice boards.
I’ve included some simple instructions for you to follow in making cornice board curtains with ease.
These steps may be subjective, so it is all up to your preference whether you want to follow these steps or not.
So, how to make cornice board curtains?
Step #1. Hang the curtains
The process starts with you hanging the curtains at your preferred place to measure it quickly and be ready for the next step.
Make sure when hanging the curtains; align or install them properly to have no issues.
You may have problems if they are not correctly installed.
Step #2. Measuring and marking the frame
In this step, any measuring tool would do the job.
It is best to use a tape measure or a framing square, though.
Start by adding four inches to the average diameter of the window by getting its internal width.
After that, you must mark two 1×8 pieces to the desired length you need.
Make sure to double-check the measuring as this can affect what your cornice board would look like when attached with the curtains later on.
Step #3. Cutting the frame
Wood is the most necessary material to have when making cornice boards.
Having one on hand may lessen the hassle of making these.
It is crucial for this step because you should outline later on from the wood itself.
So by using a square, draw a straight line on the marks you made on the 1x8s.
It would help if you used a circular saw afterward for cutting the wood.
That is the only tool suitable for this type of situation as some other ones may cause hassle or even trouble when used for this.
Step #4. Put glue on the front and top
Rundown a bead of glue up until the edge of the 1 by 8 that you have measured earlier and avoid messing up.
Why do you ask? It’s because it would not hold the other piece properly for later.
Hold the second piece of 1×8 opposite to the bead of glue you have applied, then screw the two pieces together.
Step #5. Measuring, cutting, and gluing the end cap
Hold a scrap of 1×8 at either end of the frame and make a mark where it meets the frame.
Then, using a pencil and a square, draw a line over the mark.
Cut down along the line or its axis using a circular saw to smoothen and make it more accurate to fit when inserted on your cornice box.
When you’re done with these steps, glue the interior edge at the end of the cornice box.
Repeat this process on the opposite side too.
Screw the end cap into place using wood screws as this would camouflage with the wood and would not ruin the aesthetics.
Step #6. Wrap wood with batting
For this step, you need two things. One is the fabric spray adhesive, and the other is batting itself.
A fabric spray adhesive is needed for this because of its high level of adhesion and is easy to use for application.
Coat the frame that you made earlier with the adhesive.
Make sure all parts are sprayed on to ensure that no batting will fall off during the process.
It would be best if you covered the whole box with batting.
To guarantee that the batting adheres to the wood and that there are no wrinkles, you should smooth it out.
After these steps, staple each side of the batting on its internal corner to ensure that there would be no problem afterward.
Step #7. Wrapping and securing the fabric
Again, spray the batting with the adhesive that you used earlier.
Finally, wrap and staple a side of the fabric on the internal corner of the cornice.
Pull tightly to make sure that the fabric will not have any wrinkles on the front side.
It may ruin the aesthetics.
When you are done with these steps, excess staple fabric along the edge of the cornice will not be visible as this will be against the wall.
Step #8. Attach brackets and secure
Determine the precise location of the window cornice.
Then, place a heavy-duty bracket on the upper right of the window frame by leveling and marking the openings.
As for the other bracket, level the other one that you have just installed and mark using a pencil for the second one’s placement.
Adhere afterward.
When the brackets are all set, place the cornice above with the curtains on for the final step.
Secure it again using wood screws.
Are you curious about how heavy curtains are hanged? Then, click here.
Nevertheless, that is all.
Conclusion
Now, you already have an idea of how to make a cornice board for your curtains.
And with that, we answered the question, how to make cornice board curtains.
I hope that making cornice boards for you would be easier the next time around and provide you less hassle in making one for your home, apartment, etc.