How to hang heavy curtains? In four easy steps, you can; these steps can be done with a breeze.
Perhaps, you have seen somewhere on Pinterest or at an interior design magazine inspiration for your living room décor, which includes beautiful drapes.
These long curtains are luxurious and elegant. They can also add class into your living space.
However, hanging heavy curtains can be very tricky.
Every aspect of the entire task can be challenging, starting from figuring out the correct curtain measurement for your curtains.
For instance, the measurement is a few inches off.
Then there is a high tendency that your curtain rod will be crooked.
One might say you can rehang your curtains, but it would mean that your wall will have multiple holes.
Furthermore, the task will become trickier if you cannot secure it correctly or do not have the proper curtain rod for your drapes.
But do not worry because, in this blog post, we will help you to hang those heavy curtains.
What Are The Things Needed?
Before anything else, you must prepare all the things needed first. That includes the following:
- Two-sided tape
- Wall anchors
- Rod screws
4 Steps To Hang Heavy Curtains
Below are the steps in hanging those heavy curtains. We have made the procedure easier for your safe.
Step #1. Measuring for curtains
First and foremost, you need to measure the height and width of your window.
You have to ensure that the curtain rod that you will be taking is three inches longer than the width of your window or even longer if you like.
Step #2. Choosing a rod
Now, you have to weigh your curtains.
Then, divide their weight by the width that is required for the rod.
You will use the measurement in choosing the right rod.
You must base on the information provided by the manufacturer to know which can accommodate a certain weight.
You must also get the number of brackets required for the rod’s length and the correct number and size of screws for its brackets.
Make sure to read the installation instructions provided by the manufacturer to get acquainted with the components of the rod.
Doing so will also help you in determining the proper way of attaching them to the brackets.
Step #3. Installing the brackets
In this step, you need to mark the wall for the screws using your pencil.
As you do this, you must hold the bracket onto its desired height.
After that, you may now start screwing the anchors to the marked spot in your wall.
The next thing to do is place a piece of double-sided tape onto the bracket’s back and mount it into the desired location on the wall.
Doing this can help you in aligning the anchors with the holes for the screw.
It will also keep the bracket in place as you insert the screws.
Step #4. Hanging the curtains
After you have successfully inserted all the screws, you can now attach your curtains onto the curtain rod and lift them onto the brackets.
Gently tug their ends to check whether or not the brackets are sturdy already.
Finally, you have to hang your heavy curtains.
Helpful Tips And Suggestions To Keep In Mind
Here are useful tips and suggestions that you can follow:
Tip #1. Explore special curtain rods
Decorators and designers can have specialty curtain rods designed explicitly for drapery that you cannot find in retail outlets.
Tip #2. Mark walls with self-erasing pencil
When marking the walls, you should use a self-erasing pencil so that the marks will naturally fade within the day.
Tip #3. Use metal square rod
Perhaps, your round curtain rod bents down due to the weight of the curtain.
You can insert inside it a square rod made of metal.
Aside from that, it would help if you also increased the brackets.
You can find the square rods on different metal fabricators or at large DIY stores for home supplies.
There are available in different sizes starting from 1/8 inch.
You have to keep in mind that a bigger rod does not necessarily mean that it is stronger than those smaller rods.
Both the rod’s thickness and the curtain’s weight can determine whether the rod will bend.
But if you insert a rod inside another rod, it will increase the rod’s strength.
It will also serve as a quick fix if you have mounted the rod already, and it turns out that it cannot accommodate the weight of your drapes.
Tip #4. Use a stud finder to check stud location from the wall
With this, you can then mount the bracket onto a stud directly.
If you attach the brackets directly into a stud, an anchor won’t be required anymore.
Tip #5. Choose the best curtain rods for your curtain
The correct curtain rod is vital in hanging curtains, especially for heavy ones.
Although a wrong rod will look just fine with your elegant draperies, it might not be able to support their weight.
As a result, it can damage your wall.
Tip #6. Don’t mix weighty curtains with kids or pets
You have to note that heavy curtains can be a safety hazard for your kids and pets if you do not secure them properly.
Do you want to read more articles? Then click here.
That is all you need to know about how to hang heavy curtains.
It’s A Wrap!
Heavy curtains require special attention as you select and install a curtain rod.
But for as long as you have the right rod and brackets, you can succeed in hanging those heavy curtains.
Nevertheless, that is how to hang heavy curtains.