How To Make A Recliner Chair Higher In 5 Easy Steps

Have you been wondering how to make a recliner chair higher? Let this article discuss recliner chair elevation and adjustments.

The most crucial aspect of a reclining chair is its level of comfort. If you can sit in the recliner and feel comfortable, you’ve bought a decent chair.

Your recliner may, however, sit a touch too near to the ground, depending on your height and personal preference. It does not need the discarding of a perfectly excellent chair, as you can raise it off the ground in a matter of time.

 

Raising Recliner Chair Height

Step #1. Invest in furniture risers designed exclusively for reclining chairs. Furniture risers attach to your recliner’s legs and allow you to adjust the height in a few different inch increments.

Furniture risers, on the other hand, are also available for ordinary chairs and stools. When you buy furniture risers for a smaller or lighter chair, you may find that they shatter when you try to put them on a heavier recliner.

Step #2. Turn your reclining chair on its side, and you’ll be able to see all four of its legs.

Step #3. Attach your furniture risers to each of the reclining chair’s bottom legs. The risers determine the method you use. Some risers, for example, slide onto the chair’s legs while you can fasten others in place.

Step #4. Make sure that all of your risers are set to the same height (if applicable). Extend each of the four recliner risers to the “5-inch” mark on their base, for example, if you wish to lift your recliner by 5 inches.

Some risers aren’t able to be extended at all. These are usually circular rubber risers purchased according to the length you want your chair to rise.

Step #5. Return your chair to its original position, resting it on the four chair risers you just installed. You can now sit in your chair and recline to the level that is most comfortable for you.

If you find that your chair is still too low or has become too high, you can manually change the height of the risers by turning the chair on its side (optional).

 

Adjusting The Recliner Tension

 

Step #1. Check the tension of your recliner

The ease with which the backrest of the recliner leans backward is what we call “recliner tension.” Lean back against the backrest of the recliner.

Reduce the tension in the chair if it’s too difficult to lean back. If you have a slight build, lowering the tension may be a wise option because reclining the chair will need less strength.

If the chair is too far back for comfort or leans back too quickly, the recliner tension may need to increase. For more prominent people, taller people, and people who need firmer back support, this is usually an excellent idea.

 

Step #2. Forward-tilt the recliner

Ensure the back is straight and the footrest is closed, then gently tilt the entire recliner forward to reveal the chair’s underbelly.

Rest the chair on the top of its back and the front of the armrests. Adjusting the tension may require both hands, and attempting to hold the chair the entire time will make the procedure difficult.

 

Step #3. Look for a mechanism that you can adjust

You should find a set of thumbwheels or wing nuts beneath the seat of recliners with adjustable reclining tension. You may not be able to alter the tension if there is no mechanism.

On the right and left sides of the chair’s undercarriage, seek a thumbwheel or wing nut. Tension springs should be attached to the same bolt from the other side, at the end of a bolt, you should place each one in position.

 

Step #4. You should rotate the mechanism

Increase the reclining tension by turning the thumbwheels or wing nuts clockwise. Reduce the tension by turning them counterclockwise.

When dealing with recliner tension, both wing nuts and thumbwheels should be adjusted in the same way. Therefore, the essential procedures should remain the same.

Turn the mechanism with your fingers to see if it works. You may need to use robust pliers instead if it feels too tight.

Working in small increments is the best way to go. To maintain the tension uniform throughout, only spin each wheel or nut a quarter turn at a time, then repeat each adjustment on both sides of the chair.

 

Step #5. Adjustment is put to the test

Bring the recliner back to its original position. By extending the leg rest and leaning back in the chair, you may check the recliner tension. If the tension in your recliner is comfortable, you can stop here and rest in your newly adjusted chair.

 

Conclusion

The purpose of recliners is to give their users the best comfortable sitting position. However, if your recliner lacks in height and needs adjustments, it will become bothersome and wouldn’t fulfill its purpose.

Yet, it would be necessary to know how to make a recliner chair higher. We’ve shown how easy it is in this article!

Leave a Comment