Have you ever thought of making a bunk bed and wonder “how to make a bunk bed ladder?”
Bunk beds are just one of the varieties of beds stacked above each other that will acquire you lesser space to occupy your big or small room.
You can commonly see them used on specific facilities like ships, military, hostels, dormitories, and many more.
Bunk beds may cost you a little more of your money.
But I think that its price isn’t that bad for two beds that will save you lots of space.
Also, when you need to pack your things to move on to another apartment or place to live on, it is a lot easier and lighter than a regular bed frame.
Now, how to make a ladder for the bunk bed?
Usually, the ladders on the bed decay over time, leading to a break, which means you need to make or have a new one.
Worry no more because we got you covered.
So stay with us until the end of this article and let us teach you the basics and key points on how to do it.
Steps To Make A Bunk Bed Ladder
Bunk beds are one of the best pieces of furniture that you want to own.
They offer a bed for two stacked above each other, which means it consumes lesser space.
Lesser space consumption is a must when it comes to having a small house or apartment.
That is needed to fit all of your other necessities and furniture in your room without any hassle.
Though sometimes, bunk beds differ in price depending on the quality and materials used.
The best option is to opt for a bunk bed that is expensive but will last you years of usage, especially that it carries the weight of two people at the same time.
Cheap bunk beds may cause unintentional harm to you if used poorly.
Their ladders are sometimes slippery and may decay faster.
It will then lead you to a broken bunk bed ladder that has the needs to be replaced.
You can buy hook–on ladders online though you cannot assure that they will last long enough.
And you may have to buy another one once the first one you bought has been broken, which will cost you another round of money.
Now to ensure that you’re spending less without wasting any materials, we have prepared some DIY steps that may be useful to you.
That will require maximum effort and time, but we promise you that you can achieve the bunk bed ladder suited to your preferences once you are done.
Regardless, here’s how to make a bunk bed ladder.
Step #1. Determining the length of the ladder
Before determining the dimension of the ladder, you will need to gather the required materials.
That includes the following tools and materials which you will need to start the process:
- Finish nailer
- Table / Miler saw
- Wood glue
- Tape measure
- Filler
- Sandpaper
- Nails
- Wood
Now, if you have acquired all of the needed items above, it is time for you to start measuring the height of your bunk bed’s ladder.
To do this, first, grab your tape measure and start basing on the top bunk as this is the measurement needed to know how tall the ladder shall be.
Also, remember that if the ladder is blocking something, you can always decide to adjust how far it will lean to make it easy to climb without worries.
Step #2. Prepping the wood
For this step, two long pieces of lumber are required to construct this ladder.
The timber for the side rails should be about eight feet long and two by four in size.
Keep in mind that the wood you choose should be long enough to reach the floor and provide consistent support over time, or else undesirable events may occur.
Now that you have measured them on the first step, it is time that you cut them according to the height that is required.
Always be cautious when dealing with things like this because it will require you to use saws and other sharp materials, which may cause harm to you.
Then on the top of the lumbers, cut a curve.
Sand the wood with sandpaper to smooth out the timber and sharp edges due to this.
Also, do not forget to determine how many steps the ladder will require.
And how much room will be required between each level?
We recommend using a router to cut specific dimensions on your notches.
That is inside of the step markings.
Do this after you measured all of the steps on both sides of the rails.
Step #3. Sticking rungs onto the rails
Once you have both rails placed in the bed, it is time to put all the ladder steps into them.
To do so, choose a piece of wood that has the correct height and thickness.
Then trim it to the precise size required for the notches.
Now apply some generous amount of wood glue onto the notches and stick it inside.
To make sure that the ladder steps won’t wobble or be lost, you can use a drill to hole and put screws onto it to make sure that they will fit tightly.
Once you have them all inside of the notches, sand the ladder for finishing touches and apply a coat to protect it from withering over time.
Conclusion
Now that we’ve discussed the topic of “how to make a bunk bed ladder?”
I hope that you have learned the steps on how to make a DIY ladder.