How To Fold A Bob Stroller? Easy Steps

How to Fold A Bob Stroller? This is a question all new mothers do ask. Read on to learn more.


Quinny Moodd car seat

Steps on Folding A Bob Stroller

Step 1. When folding a bob stroller, you should pull the handle up until it locks into place.

Step 2. If your bob stroller has a flip seat option, make sure that this is in its proper position before attempting to fold the unit.

Step 3. Next, simply press down on both sides of the footrest and continue pressing until they lock into place.

Step 4. Lastly, lift on the rear wheel assembly so that it folds over onto itself. This will prevent any damage from occurring during transportation or storage.


How to Operate Quinny Moodd Stroller

Quinny Moodd is a lightweight, compact stroller that offers convenience and comfort. What it lacks in bulk, it makes up for features like an adjustable handlebar to accommodate the height of parents or caregivers, as well as oversized sun canopies to keep your little one protected from both the elements (sun) and the eyes of passersby (shade).


How to Remove the Seat on a Quinny Zapp Flex?

The Quinny Zapp Flex is a car seat carrier that can also function as a travel system for your little one.


How to Install Car Seat in Quinny Moodd Stroller: What is Child Weight Limit and Height Requirements?

Quinny mood only has two settings, which are suitable for children who weigh anywhere between 11lbs-36lbs (approximately four years old). If you’re looking to use it with an infant, however, there are other options available online through Amazon like the Maxi Cosi Mico or Cybex Aton Q.


How do you Attach a Maxi-Cosi Car Seat to a Quinny SCroller?

The Maxi-Cosi Pria 70 car seat is a versatile option for parents who want their child to have the ability to face forward or towards them. What makes it great for use with Quinny Moodd strollers is that this particular model of seats has been designed specifically to be attached directly onto the frame rather than using an adapter.

So, what you need to attach your Maxi-Cosi Pria 70 car seat (or any other brand) onto a Quinny SCroller is:

  • Quinny SCroller
  • Maxi-Cosi Pria 70 Car Seat
  • Car Seat Adapter – This can be found on Amazon and eBay easily!

LATCH Connection Strap – The LATCH connection strap is the strap that can be found on either side of your car seat. What you need to do is pull up the straps and clip them onto each end of the Quinny SCroller frame, as shown in this Amazon video:


How To Connect Your Car Seat With The Quinny Moodd Stroller

Note: You’ll also want to make sure that when attaching car seats with adapters for use with a strolling system like Quinny Moodd, it’s important to ensure there are no gaps between the adapter and vehicle seat which could create a safety hazard. If so, then check out our post about how we got rid of that pesky gap by just using some basic household items!


Car Seat Compatible With Quinny Moodd Stroller

Compatible Car Seats: Infant Trend (Fits in bassinet only) Chicco KeyFit 30, Britax BABYZEN YOYO, Graco Snugride Click Connect 40.

Quinny recommends the use of an infant car seat before your child weighs 25 pounds and has outgrown their convertible or toddler car seat.

If you’re using a Seat Belt to secure your baby’s rear-facing stroller when they are under 25 lbs., it is important that you read through all instructions and guidelines for installation as well as ensure there aren’t any safety recalls on the specific model of infant carrier before buying one.

Please note that we have not been able to test or confirm this compatibility and don’t know if it will work with surety.


How to Install a Quinny car Seat Adapter

Place seat belt in the Quinny car seat adapter. Position the centre of the lap belt across your child’s thighs, not their stomach or chest.

Step 1. Use one hand to hold up and steady any part which is hard for you to reach with both hands-free; use your other hand (the right if you are sitting on that side) to pull the belt up and over your child’s shoulder, then wrap it under their arm so they can’t get out of it.

Step 2. Tighten the lap belt by pulling on both ends with even pressure until you feel resistance; release one end and tighten again if necessary for an extra snug fit.

Step 3. Check that your child cannot go more than two finger widths between his back or bottom and the seat (he should be sitting all the way in). If he has any more room than this, try tightening the strap a little bit more before fully securing him into place.

Step 4. For safety reasons children must always use approved car seats when travelling in vehicles, but Quinny parents have found creative solutions including using stroller adapters which are available for most of our strollers. What car seats are compatible with Quinny Moodd?

Step 5. The Chicco Keyfit 30 is the only one on the market that fits both Quinny’s Two and Four models

Step 5. It can also be used in conjunction with a back seat adapter to accommodate children from birth up to three years old, or it can convert into a travel system by purchasing an approved infant carrier frame for your baby.

A special version has been created by Mifold specifically designed to fit all two-seater Q Models (Two Seat Carrycot, Two Seat Frame and Jogger). This makes installation much easier than any other child restraint device because there’s no need for adapters.

Leave a Comment