Are you wondering how to fix dryer knob shaft? Well, we will tell you how you can do so and other problems related to knobs in this piece of writing. Issues related to knob breakage, shaft, and misplaced switch are super easy to fix and require a little amount of time and effort.
Without a doubt, a malfunctioning knob sucks the laundry time by making it hard to operate the dryer. You have to spend a few minutes from your swamped routine to eliminate any issue related to the dryer knob.
All the repair techniques mentioned below work equally well on the dryer of every company in the market, whether it is GE, Whirlpool, Kenmore, or Hotpoint. My friends, there are more things that you should know, so without further ado, let’s start!
Steps To Fix Dryer Knob Shaft
If one or more shaft has fallen inside the control panel and you cannot use the dryer, the knob is not fixed. Here is the method that will help answer your question on how to fix dryer knob shaft. We tried our best to alleviate you with the easiest possible method.
Step #1. Cut off the power supply
Disconnect the electrical supply to the dryer. Turning off the hot and cold-water valves is a good option for a safe operation. Then go to the backside of the dryer and remove three mounting screws from the metal plate with a Philips screwdriver.
Step #2. Remove the control console
Pull out the knobs from their respective shafts. Remove the control console by releasing it from the clips that secure the console with the top panel. Let the panel lie on the dryer.
Step #3. Take out the switches
Generally, we have three knobs on the control panel; start temperature and timer. The knob switch that fell off in your dryer could be any of these. Switches fix on the notches with the clips located on different sides of the switch. The main reason behind failing is the breakage of these notches. The clip is on the left corner of the timer switch, the front side of the temperature switch, and the left-center of the start switch. Now you have to pull the switches out. Lift the clip and turn them in the counterclockwise direction. Know where to buy lid switches for washers.
Step #4. Reinstall the switches in the new control panel
Now you have to reinstall the switches in a new control panel. Place the switches on their respective notches and rotate clockwise to fix them. Reattach the control console on the top panel and the backplate by fixing three mounting screws. Fix the knobs on their shafts, and you are good to go with a perfectly alright dryer. Find out how to remove the control panel from the Whirlpool duet sport.
Fix A Cracked Knob
Weird hacks are incredible when someone is in a hurry and has to reach somewhere on time. So, we figured out a hack that seemed crazy and unreal. But, its result is superb and puts your life at ease. When you cannot turn the knob in a specific direction of your choice, it turns freely in both clockwise and counterclockwise directions. Remove the knob from its position by just pulling it out. Do check out for cracks on the slot that fixes on the shaft. If there is one, you can fix it using string and hot glue.
What you have to do is. Just wrap the string tightly on the slot. Next, apply hot glue by using a glue gun to keep the string in its place. Be careful while securing the string with the glue, as a lot of glue won’t allow the knob to fix on its place. Put the knob back on the shaft and check if the issue has been fixed.
Order A New Knob
Don’t forget to order a new knob after doing the emergency drying. A new knob is readily available on any online appliance parts store. Just carefully note the number of cracked or broken knobs. The number is visible when you pull the knob out of its place. Ordering the knob according to the mentioned number is vital to get one of perfect size.
Replace The Knob Clip
Sometimes there isn’t a problem with the shaft or knob. But with the small clip-in knob slot. The clip helps the knob to fix on the shaft. You won’t be able to rotate the knob towards your desired settings as it becomes loose if that clip is broken or damaged. Fixing this issue is super convenient, and anyone can do it without a helping hand.
Firstly, you have to order a new knob clip. Carefully keep the clip after receiving the order as it is teeny tiny in size. You have to plug off the dryer before repairing it. Then pull out the already loose knob from the shaft and remove the black color clip using a small flat-blade screwdriver. Replace the old clip with the new one. You must match the sides of the knob and slot with each other. Reinstall the knob on the shaft in the same way (by matching the sides).
It’s A Wrap
It is wise of you to research the detailed process of how to fix dryer knob shaft before getting into the repair. Otherwise, you have to deal with a significant mess. You may want to read related articles; know how to fix a dryer that wont spin and why my dryer wont spin.