How To Fix A Chair Leg Support In 5 Easy Steps

In this article, we will discuss how to fix a chair leg support. This will keep you from going to the repairman when you can just do it yourself in the comforts of your own home!

We know the struggle when you just want to sit for a bit and relax, but there’s a feeling that something is wrong with your chair. You will need to inspect the chair and make a replacement for it.

how to fix a chair leg support

However, as easy as that may sound, it may be a bit of a challenge when doing it. You also have to be careful about some safety hazards that might come in hand.

Please sit back and relax as we present you with a step-by-step procedure on fixing a damaged chair leg and how to be safe while doing it!


How To Repair Broken Chair Leg


Step #1. Check how bad the damage is

Before doing anything else, take a closer look at the chair leg and assess the damage. This will help you see what you can do to fix the problem. Remember to put it on a carpet or something sturdy and make sure that the chair will not slide off.

From here on, you can also formulate a plan on how you will repair the chair leg. Making a plan before the procedure will help you stay focused on what you need to do.


Step #2. Make a replacement

Most chair legs are made from wood, so check what type it is that your chair has. If you don’t have a spare wood for it, anything close to it may do. First, use your saw and level out the surface of the damaged area.

Once you’re done doing that, you’ll want to sand the area to make sure everything is nice and smooth for the following step. Get your scrap wood and cut it to the same length and thickness.


Step #3. Use a heavy-duty glue

Get the replacement and carefully put it on the damaged spot using some heavy-duty glue. Be careful about handling this kind of product because you definitely won’t want to spill it onto your hands accidentally.

Once you’re done doing that, clamp the area to hold it together and help it to dry faster. For best results, let it dry until the next day.


Step #4. Create pilot holes by drilling

Get a pencil and mark the areas that need some screws. Then, start drilling some pilot holes from the inside of the chair leg out. Starting from the inside out can help for a more accurate location of the holes.

Ensure that these holes should not be too loose as they will be useless or too tight that the screws won’t fit inside. You may also consider countersinking the screws to achieve that “invisible screw” look.


Step #5. Finish with topcoat

Finish up your project by sanding the area once more to make a leveled surface for painting. If your replacement wood is a different shade from the original wood, you can buy some wood stain to even everything out.

You may wish to seal everything up with a topcoat. Doing it will make the wood shinier, but it will also serve as a barrier to make the paint last longer and prevent scratches.


How To Make Furniture Last Longer 

To make furniture that will last a long time doesn’t always depend on just the quality of the materials, but also the effort of the owners themselves. One way to do this is to lift the furniture instead of dragging it across the room when you have to remove them. Doing this will not only prevent damage, but it also keeps scratches from happening on your floorings.

If you have kids in the house, the urge to jump on furniture like sofas can be very tempting. Setting a couple of house rules like “no jumping or standing on the couch” can extend the life of your furniture. Remember that these items don’t come cheap, so take good care of them and make the best out of your money.


How To Be Safe While Fixing Furniture


Wear protective gear

Before doing any repairs, you must arm yourself with some protective gear. It may sound exaggerated, but you are most likely to injure yourself by doing something minor rather than working on some heavy ones. Make sure to wear some protection such as gloves and a face mask.


Clean workspace

Although repairing furniture may not usually promote a clean workspace, at least try to make your place free from boxes or any random things that might cause an accident. It would also make working a lot easier when you have the things you need in an organized space.


Use the proper tools

Please refrain from using tools that aren’t fit to work. Besides the fact that you may damage that object, you may also put the thing you’re working on at risk. Not using the proper tools designed for specific repair areas can result in bad results for your project.



Now that you know how to fix a chair leg support, go and fix that chair that annoys you for quite some time now. Just remember to examine your chair first before proceeding to make any progress. It would help if you also practiced caution when handling power tools as they can be a health hazard to you and your workspace.

Leave a Comment