How to Disassemble a Value City Recliner

This article will provide a step-by-step guide on how to disassemble a Value City recliner. The entire process should take about two hours, assuming you have the right tools and enough space to work with.

To start, you must put on some old clothes or cover your carpeting with a tarp to protect it from any stray screws or nails that may be leftover after the project is completed. It is also very important that you use safety goggles at all times when working with power tools so as not to risk injury!

 

Steps on Disassembling Value City Recliner

Step 1. First, you should take the armrests and set them aside. You can unscrew them by hand, but it is a bit more difficult than using an electric drill to spin them off with ease.

Step 2. Next, start removing screws from both sides of the seat until they are all gone and you can lift on each side to remove the back.

Step 3. Lastly, you should unscrew any additional screws that are holding in both arms. Again, these will be much easier to get off with an electric drill if they have been tightened securely enough by hand first without one.

Step 4. If your recliner has a steel rod running down the middle of it for stability purposes then you should unscrew this rod as well with an electric drill before the final step.

Step 5. Last, you can lift on each side of your recliner and remove it from its hinges without any resistance whatsoever!

 

What is Value City Recliner?

A Value City Recliner is a reclining chair that is made by a company of the same name.  They are designed to be comfortable, durable, and fairly cheap for just about any budget.

The design features two small wheels on either side so you can move it from one place to another with some ease as well!

 

What is a Value City Recliner Made of?

The Value City recliners are made from all sorts of different materials.  It can be plastic, metal, or even woven fabric that has been stapled into place to make the chair comfortable enough for its purpose!

One thing that they have in common though is that they are made from cheap materials, which is what sets them apart!

One of the most common materials for a Value City recliner to be made with is plastic.  The design on these chairs usually consists of a frame out of metal and then this seat will be either molded or formed to make it durable enough for its use.

The metal is usually just super thin, which in the long run makes it less durable than plastic!

Another material for a Value City recliner to be made out of is a woven fabric. It is used as stuffing and then staples are driven through this canvas-type material to create that “seat” area.

The last material that these Value City recliners are made out of is plywood.

 

How to Deep Clean a Value City Recliner

Clean the chair with soap and water first.  This will remove any dirt or dust that’s been accumulating on it over time.

Use a vacuum to get into all of those nooks and crannies, where you might not have wiped down due to your limited mobility if using a cloth.

Next, use a damp cloth to clean the chair.

Lastly, dry it off with a towel or use an air compressor if available on your vacuum cleaner.

 

How to Use Slipcover on Value City Recliner

The first thing you need to do when it comes time to put the slipcover on is making sure that your chair is completely dry.

Next, stretch out the slipcover over the top of your recliner and fit it so that there are no wrinkles or folds in the material before securing with whatever clips come provided with the slipcover.

Finally, use the ties at the bottom to secure and tighten in place.

 

Benefits of Owning a Value City Recliner

The Value City Recliner is a great option for those that need to save space and are looking for an affordable solution.

The recline function on the chair can be adjusted by either moving the lever located just below the seat or twisting your feet which will both allow you to get in and out of the chair with ease,  as well as recline the chair to your desired position.

The armrests can also be adjusted for any height and spacing preference

If you have a TV in the room, then this is an ideal chair because it has built-in cup holders that will allow you to easily enjoy sitting back while watching your favorite shows or movies!

 

How to Care for Value City Recliner

Value City Recliners have been designed to be easy to clean and maintain.

To keep your chair looking fresh, all you need is a vacuum cleaner with an attachment or long brush that will get into the crevices of the fabric (especially if you use it for pet hair) as well as some mild soap and water.

For more stubborn stains, try using a product with an enzymatic cleaner to remove the toughest of dirt and grime from any fabrics that you use in your home.

You can also get some leather or vinyl conditioner which will help restore cleanliness as well as has a nice scent for those who want to continue to enjoy the smell of their Value City Recliner.

Leave a Comment