How To Clean The LG Washers? 3 Awesome Ways!

Do you know how to clean the LG washer? You can clean the LG washers in simple steps; by cleaning the washer drum, washer dispenser, filter pump, and rubber seal.

For cleaning the washer, you need cleansers, baking soda, and vinegar. Older washing machines consume a lot of water; however, front-loading washers use a lot less.

how to clean the LG washers

In the LG front load washer, you have to add the water in the washer bucket, and the clothes are moved with the help of water by gravity and the rotation of the tub.  Despite this, your LG washer uses less detergent and water, but the water and detergent stuck quickly in any corner of the machine, like in a rubber seal, which produces a foul smell and mold. In this case, your washer needs to be clean. To understand how to clean the LG washing machines, read this article at the end! 


Ways To Clean The LG Washers

For getting rid of mold, stinky smell, and germ from the front-load washer, could you keep it clean? These tips will teach you how to clean the LG washers. 


#1. Using HE detergent

It’s better to use a detergent that has been manufactured in a high-efficiency washing machine. For example, on the LG front load washer, it was stated HE. HE detergents generate less foam, which helps to maintain your LG front-load washer operating smoothly throughout time. Other detergents create excessive suds, which produce a layer of grime on the washer drum and drain hoses, creating a breeding ground for mold and mildew.

That’s why always use the liquid softener and bleach according to your load. Using less water and less detergent helps you clean your washer for a long time. This tip is unique in cleaning your LG washer.

Know how to use laundry detergent pods correctly


#2. Clean the rubber seal

It’s a great idea to clean the rubber seal around the door regularly. Your LG front-load washer is designed in such a manner that it holds the seal tightly in one place around the entrance to avoid leakage. It is better to clean the rubber gasket and the area on the door where it joins after every washing. If you see that your rubber seal is foul, hair and mold are stuck inside it, and then it’s the correct time to clean it. If you don’t clean this rubber seal, it will produce a foul stinky smell. For cleaning the rubber seal, you need vinegar. Make a water and vinegar solution. Take white vinegar and put it in lukewarm water.

Take a microfiber towel, dip it in the mixture of white vinegar and water. You rubbed this cloth inside the rubber seal by using your fingertips. To help keep smells at bay, wipe clean the interior of the washing drum with vinegar and water. You can also clean the rubber seal gasket by unlocking the washing lid and pulling aside the seal to reach the washing machine’s interior. Again, any obvious things, such as pennies, safety pins, or fur, should be removed. 

Whenever you notice dark stains on the seal, if the LG front load stinks like mold, wash it with mold remover or warm lukewarm water and rub it thoroughly with a hand towel until the stains are removed. Clean the fungus patches by soaking an unusable toothbrush and, soaked the brush in a 10percentage bleach solution if the mildew is stubborn.

Read about how to replace the rubber seal on the front load washer


#3. Clean the dispenser

There is also a detergent dispenser in the LG front load washer. It would help if you also cleaned the detergent dispenser. For cleaning this, you need baking soda and vinegar. As vinegar is antiseptic, it can clean germs and dirt. To clean the washer dispenser, add a small cup of baking soda in the washer bucket and the same half cup of white vinegar in the washer detergent dispenser. 

After adding the baking soda and vinegar, run a wash cycle with hot water. If the washer drum smells mildewy, you can use chlorine bleach instead of white vinegar and baking soda and add a suitable quantity of chlorine bleach to the detergent dispenser. Must keep in mind that the chlorine Bleach and vinegar should never be mixed. Mold and mildew can grow in the washing tub due to residual dirt and soap.

The “Tub Clean” function on the LG front load washing machine is mainly used with a professional cleaner to remove the stinky smell. But if your LG washer does not contain a “Tub Clean” function, it is an excellent idea to use vinegar and baking soda. You may want to read about why does my washer smell like rotten eggs and why does my washer smell like mildew.


It’s A Wrap!

We were happy that you all learned how to clean the LG washers. So if you are using the LG front load washer, and it becomes filthy because of regular use, it’s time to clean your washer. Dirty washers produce a stinky smell that you will absorb in your cloth. So it’s better to clean your washing machine with vinegar, baking soda, and bleach. During cleaning, first, clean the washer drum rubber seal and also the laundry detergent dispenser.

Don’t be panicked if you don’t know how you can clean the LG washer. Just read these tips that are mentioned above to remove the smell and stubborn stains from the washer. Thank you, friends, for reading this article!

Leave a Comment