How to Adjust Rocker on Leather Glider Loveseat

Is your leather glider loveseat giving you trouble? Is it all of a sudden stuck? How to adjust rocker on leather glider loveseat?

The glider rocking leather loveseat is the Cream of the crop of rockers, with a smooth and silent movement. However, when gliders age and accumulate hours where all you have to do is rock, they can become loud. So, this article gives advice and techniques on adjusting rockers on leather glider loveseats to make them last longer.

leather glider loveseat

Making a few adjustments to an uncomfortable leather glider loveseat may frequently solve it. Changing the amount of pressure necessary to rock and glide the chair’s back might assist in customizing your loveseat. Adjusting the chair’s upright posture can also help you adapt your loveseat for the most excellent pressure experience.

Reclining systems are divided into two categories. Either a manual or an electronic version is available. You may or may not be able to remedy this problem, depending on the design of your loveseat. 

It is because some loveseats, like the gliding recliner, have a restricted range of motion. As a result, reclining is essentially a stationary movement. Furthermore, some electrical loveseat issues will want professional assistance.


How to adjust rocker on leather glider loveseat?


Step 1 Adjusting the Tension on a Recliner

Check the tension on your glider loveseat. The term “glider tension” relates to how readily the glider’s backrest leans backward—lean back against the chair’s backrest. If it’s too difficult to lean back, reduce the tension on the loveseat. 

If you have a tiny build, it may also be a good idea to reduce the pressure. If it’s too tough to lean back, reduce the loveseat tension. Lower the pressure if you have a tiny frame because reclining the loveseat will take less strength.

If the recliner leans too far back for comfort you may need to increase the recliner tension. So, just adjust the tension for this part. Nevertheless, it is typically an excellent choice for more prominent folks, taller persons, and people who want firmer back support.


Step 2 Lean the glider forward.


Make sure the back is high, and the footrest is closed. Next, tilt the entire recliner forward to uncover the bottom of the loveseat. Place the glider loveseat on the front of the armrests and the top of the back.


To adjust the tension, you may need both hands. You can’t do this process with just one hand.  If you attempt to hold the loveseat the entire time, the operation will be tough to finish.


Step 3 Check for an adjustable mechanism.

Under the seat of the gliding loveseat with an adjustable glider, tension should be a pair of thumbwheels or wing nuts. You may not be able to change the tension if no mechanism is available. Be cautious of it whenever you go over this step.

Look for a thumbwheel or wing nut on the right and left sides of the chair’s bottom. Each should be placed at the end of a bolt. Tension springs should also be attached to the same bolt from the other side.

The precise location of the mechanism may differ depending on the manufacturer and model. The tool is usually located beneath the seat and near the rear of the loveseat. In rare cases, the mechanism may be positioned closer to the bottom center.


Step 4 Spin the mechanism.

To raise the reclining tension, turn the thumbwheels or wing nuts clockwise. Reduce the strain by turning them counterclockwise. Because both wing nuts and thumbwheels should be set in the same manner, the fundamental procedures should be the same.

Experiment with rotating the mechanism using your fingers. If it’s too tight, you might need to use some strong pliers instead. But, again, working in tiny steps is recommended. 

To maintain the tension consistent throughout, spin each wheel or nut a quarter turn at a time. Then, repeat each adjustment. Do this on both sides of the loveseat.


 Step 5 Validate the adjustment.

Bring the loveseat back to its original position. By extending the leg rest and lying around on the loveseat, you may check the glider tension. You can rest in your freshly adjusted loveseat if the glider tension is comfortable enough. 


Step 6 Repeat as necessary.

Follow the same methods to modify the tension of the glider as needed. Close the footrest, lean forward on the loveseat, and adjust the mechanism in the correct direction. Only make quarter-turn adjustments to the tension each time. 

It may be tempting to make more significant-excellent pressure modifications. You will most likely overcompensate too much in the other way. Never completely loosen or tighten the adjustment mechanism. 

The tension spring may be permanently damaged if you do so. After you’ve made your changes, the tension spring should be unable to move on the bolt. It is too loose if it moves. 

So you should make at least one clockwise half-turn on the mechanism. In the same way, if the spring gets totally compressed and excessively tight, spin the mechanism. Do this  at most minuscule one half-turn counterclockwise to solve the problem.



As you can see, It is a simple process on how to adjust rocker on the leather glider loveseat.  Most glider designs should be fixed using these three ways. Nonetheless, if your problem persists, contact the maker of your glider loveseat for assistance.


Leave a Comment