Most people love to sit back and relax on a recliner chair when they are home. You may have noticed that your recliner is starting to sag, which can be very uncomfortable, but don’t worry! This blog post will teach you how to support a saggy recliner chair with cushion so you can continue relaxing in comfort.
If you have a recliner that is getting saggy but doesn’t want to upgrade your entire chair just yet, we recommend considering how to support a sagging recliner chair with cushion.
Recliners are typically built so the back and bottom of the seat can tilt up or down for comfort purposes. This means that if you notice your recliner is sagging, you can easily fix the issue by adjusting the back.
Adjusting your chair to properly support a saggy seat will help keep you comfortable and happy! If this sounds like something that might be helpful for you or someone in your family, take a look below at how to adjust the tilt of a recliner chair.
Steps on Supporting a Saggy Recliner Chair With a Cushion
Step One: First, find the release lever on your recliner seat and pull it to tilt the back backward or forwards accordingly. This will make sure you are comfortable in any position that you choose to sit in while using this chair. Be careful when adjusting so as not to let go of the lever too quickly – if you do, the back will slam forward or backward.
Step Two: Next, find a piece of furniture that is about waist high and set it behind your recliner chair to prop up its end. This also can be done by using other items around the home like books or boxes – anything that might provide enough height for you while still being sturdy enough to support the chair.
Step Three: Always make sure that you have a handle on how much height is needed for your prop, and so as not to over-extend it beyond its abilities. This furniture item must remain in place while your recliner is tilted back or forward – if not, then it will not work.
Step Four: Once you have your prop in place, make sure that the lever of your recliner is at its lowest position and then gently move it back into a comfortable sitting or lounging angle to allow for some support from the chair’s original design – not just with what you’re doing now.
Depending on how saggy the chair is, you may need to remove some of the extra height that your prop has given it.
Step Five: Place a cushion or pillow on top of this new height to provide an additional layer of comfort and support for your back – which should now not be too cramped while reclining.
Causes of Sagging on a Recliner Chair
A sagging recliner chair is one where the back of the chair has descended, which can be due to several different reasons. These may include:
Age – if your furniture is over twenty years old then it’s likely that its springs have weakened with time and this will cause any seat or footrest to sag downwards
Use – how often you use your chair will also determine the condition it’s in. If it has been used a lot then this may have caused springs to weaken
Lack of Height – if, for example, you take out the sofa and swap it with a recliner chair without adding any height to the bottom base area (to support the springs), then this will cause the chair to sag
Lack of Maintenance – if you don’t take care of your furniture and allow it to become dusty, dirty, or infested with pests for long periods of time then this can weaken the strength of a recliner chair’s springs.
Disadvantages Of A Saggy Recliner Chair
People who use chairs that sag may find it difficult to get out of their chair because the seat is too low and they can’t push themselves up
Some people have even fallen off their recliner chair due to how much it has sagged down. This could also be caused by a lack of space between the back or arms of the chair and seat
The person using a saggy recliner chair may not be able to feel their feet on the ground
It’s uncomfortable for people sitting in this type of furniture because it is too low, which can lead to back pain.
What is Sagging in a Recliner?
Sagging is when the springs and coils in a recliner chair’s frame have been pushed downwards, which causes it to lose its support
A saggy recliner chair will also be more likely to squeak or make noises because of how much space there is between the wood that has become loose inside. This could create issues for people who are trying to get work done in the same room.
It’s also possible for a saggy recliner chair to become stuck with how much it has sunken down, which means there is an increased risk of someone being injured if they try and move from their chair.
There could be different reasons why your recliner chair has become saggy. This could be something as simple as the springs and coils becoming loose, or it might indicate a larger problem with how worn out your chair is.