How to Put a Rod into the 4 Tier Swivel Tower

If you are looking for a how-to to put a rod into the 4 tier swivel tower, then this is the place. We’ll go over how to assemble and mount it in your home or office. The instructions below will be easy enough that any beginner can follow them. You don’t need any special tools either!

Putting together a rod into the 4 tier swivel tower is not as hard as it sounds – with these instructions, anyone can do it. We’ll go over how to assemble and mount it in your home or office. The instructions below will be easy enough that any beginner can follow them. You don’t need any special tools either!

4 Tier Swivel Tower

 

Steps on Putting a Rod into a 4 Tier Swivel Tower

Step 1. Insert the bottom rod into one of the holes on each side. Make sure that the end with the little hook is going in.

Step 2. Take a top rod and insert it from under, through both rods already inserted above it. Repeat this process until you have all four tiers mounted – make sure to do them evenly for the best balance.

Step 3. Hold the top rod in place on one side and insert the bottom rod into a hole on that same tier. Make sure to do this for all four tiers – alternating which rods are inserted from under, through those already put up.

Step 4. Now take your other hand and hold down as many of the rods at once as you can while you push the bottom rod up into its hole.

Step 5. If you can’t get a good grip, try wrapping your metal paper clips around each of the rods and clipping them together to make one big loop that is easier to hold onto. Keep in mind how many rows are left for this tier so you know how many paper clips will be needed on this tier.

Step 6. Repeat these steps for all four tiers, alternating how you hold the rods down on either side and putting in the bottom rod of each new tier from underneath.

Step 7. When inserting an upper rod into a hole that has already been put up with one below it, make sure to use your fingers to push against both sides of the rod to make sure it is secure.

Step 8. When you are ready to lift the tower, hold onto each paper clip loop and gently pull up on one side of the loops or both sides at once. Don’t worry if they come out because these just act as temporary clips for helping you put them in place.

 

How to Care for 4 Tier Swivel Tower

  • Make sure to rotate the tower periodically so that all of the rods are evenly exposed and don’t get too hot or too cold.
  • Avoid putting your fingers, jewellery, etc in between any rod holes because this can cause injury if you bump into it with how quickly these towers move around.
  • Store away from children or pets because they may get ahold of the rods and this could cause injury.
  • Make sure nothing is obstructing how these towers should be spinning to avoid potential hazards for those around you as well as yourself.

 

What is 4 Tier Swivel Tower?

A four-tier swivel tower can be used to display a wide variety of items and is very versatile. It has two different tiers on either side, which are clear plastic trays that slide in at the top and bottom for easy access when doing inventory or organizing your home office. They rotate 360 degrees with a simple twist so you don’t have to bend over.

Features of 4 Tier Swivel Tower

#1. This tower is available in four different sizes, with each size accommodating a range of how many items you want to display at one time! The smallest size can hold up to 15 bottles and the largest will house up to 60 (this includes space for other items). Keep in mind that if you are using this as a home office, you may want to consider how many bottles fit on your desk.

#2. It is made of acrylic material and has a stainless steel rod for hanging items that are not in the trays like necklaces or pens. It also features two different height levels so it can be used at any table!

#3. The top tier is 17 inches from the floor and can be used for taller items like vases or coffee cups. The second tier is 12 inches high and works better for shorter items that you want to display in a more eye-catching way, such as flowers

#4. The acrylic material makes it easy to clean by just wiping it down with soap and water! You don’t have to worry about how your items will affect the material.

#5. The rod in this tower is stainless steel and does not rust. It can be used for hanging much more than just jewellery, making it perfect for displaying everything from necklaces and earrings to cooking utensils!

If you’re going for a contemporary look that incorporates a lot of colours, this model is for you. The tower swivels 360 degrees and can be adjusted to any height within its four tiers. It arrives at your door in perfect condition with no assembly required!

#6. This Tower has received rave reviews from customers who love how easy it was to put together as well as how sturdy and durable it is.