What are the steps on how to Lock Bassinet? You may be asking yourself that question, or you may have heard about bassinets and want to know more.
This article will provide 10 Steps on How To Lock a Bassinet. Parents need to lock their bassinet when they are not in the room with it so that young children do not climb out of the bed during sleep time. Here’s what you need to know!
Steps on Locking a Bassinet
Step One: First, check that your bassinet’s casters (wheels) and levelling feet are in the unlocked position. If you’re using a Dream on Me Crib and Changer Combo or Arm’s Reach Concepts Clear-Vue Co-Sleeper Bassinet, make sure those locking levers are turned all the way to the left.
Step two: Remove the mattress support from your Dream on Me Crib and Changer Combo or Arm’s Reach Concepts Clear-Vue Co-Sleeper Bassinet. To do so, simply press down on the buttons located near each corner of the bassinet until it comes out completely. You should hear a click when you release the buttons.
Step three: With the mattress support removed, you should be able to slide and remove your bassinet’s fabric cover. Once it is off, you’ll see four screws on each corner of your Dream On Me Crib and Changer Combo or Clear-Vue Co-Sleeper Bassinet. Use a Phillips screwdriver to remove the screws.
Step four: With all eight screws removed, you should now be able to lift your Dream on Me Crib and Changer Combo or Clear-Vue Co-Sleeper Bassinet off of its frame. The mattress support is attached with Velcro so if desired, you can reattach it later.
Step five: At this point, it’s time to clean! Use a damp microfiber cloth and wipe down the entire bassinet. Pay close attention to all of the nooks and crannies that collect dust or dirt during everyday use. You can remove any excess grime with a dry microfiber cloth if need be.
The Dream on Me Bassinet and Changer Combo features a waterproof pad that can be spot cleaned but should otherwise not require any extra attention.
Step six: Once your bassinet has been thoroughly wiped down, it’s time to put everything back together! First, attach the mattress support if needed by pushing it into place with both hands. If your Dream on Me bassinet does not require mattress support, place the fitted sheet back on top of the pad and tuck it tightly under each side.
Step seven: Next, attach the canopy by first inserting its metal rod into one end of the slot in front and then securing it at the other end with either a rubber stopper or a plastic pin.
Step eight: If you have one, attach the mobile by inserting its hook into the slot located just below where your canopy is attached. Finally, put your Dream on Me bassinet away and relax!
You’ve earned it! how to lock fisher price soothing motions bassinet how to lock fisher-price soothing motion bassinet how to lock fisher price soothing motions bassinet how to lock fisher-price soothing motion bassinet
Step nine: Next, attach the canopy by first inserting its metal rod into one end of the slot in front and then securing it at the other end with either a rubber stopper or plastic pin.
If you have one, attach the mobile by inserting its hook into the slot located just below where your canopy is attached. Finally, put your Dream on Me bassinet away and relax!
How to disassemble Fisher-Price Soothing Motions Bassinet
Remove the mattress from its compartment. Unsnap all five snaps of the bassinet cover and separate it from the base. Then, turn over both parts so that you can get to the foam pad under where your baby sleeps.
Use a flathead screwdriver to remove any screws on the back of the bassinet, if needed. You can now take off any fabric pieces from your baby’s bedding and clean them to remove stains or odours.
How many snaps are there in a Graco Dream Suite bassinet?
There are five snaps on each side of the bassinet, and they need to all be unsnapped to take the cover off.
What is the weight limit for Graco Pack N Play?
Some models of the Graco Pack N Play have a weight limit of 30 lbs. Please refer to the product manual for specific information regarding your model.
How do you disassemble Fisher-Price Soothing Motions Bassinet?
Remove four screws on each leg using hex tool Cut fabric at corner points, but leave attached to plastic attachment clips for ease of reassembly Unzip the bottom zipper completely around bassinet cover and expose all corners with metal attachments. Undo side ties by pulling towards outer edges of mattress firmness.
Carefully remove feet from inside corner folds where legs are attached to them by pushing out foot into other direction while supporting entire weight or body in another hand without overloading stitching that holds together a one-quarter section of the sheet covering what used to be a part of the upper portion .
Pull off top sheet entirely exposing two smooth halves which can also get dirty if baby spits up etc… Wash it like any other piece of fabric