Cleaning a stroller is no easy task. How often should you clean your stroller? How do you wash it? How do you dry it? We get these questions all the time, and so we have compiled this comprehensive guide to help answer them! Read on for tips on how to keep Joie Nitro Stroller clean in between uses.
Steps on How to Clean Joie Nitro Stroller
Step 1. Clean the fabric with a mixture of water and mild detergent, then rinse. Fill up your sink or bathtub with lukewarm water and add two tablespoons of mild detergent to it. Put the Joie Nitro stroller in this solution for five minutes before rinsing off all soap residue from its exterior thoroughly using clean water.
Step 2. Clean the frame with a mixture of water and mild detergent, then rinse. Fill up your sink or bathtub with lukewarm water and add two tablespoons of mild detergent to it. Put the Joie Nitro stroller in this solution for five minutes before rinsing off all soap residue from its exterior thoroughly using clean water.
Step 3. Dry the frame with a clean towel.
How to remove a Joie stroller cover
The Joie Nitro Stroller has a removable cover that can be removed to wash. How do you remove the joie nitro stroller cover?
Step One: Remove the seat from the frame and fold it down over itself or lay flat on a surface for easy access.
Step Two: Lift one side of your new joie nitro stroller cover at an angle, then take hold of both sides of the fabric in each hand. Pull apart gently until there is enough slack to grasp with two hands on either end by taking hold of opposite corners. You should now have four arms full length and elasticized together.
Step Three: Once this step is complete, rotate the material so that the excess fabric is now on the wrong side of your joie nitro stroller.
Step Four: Repeat steps two and three until all four arms are gathered in one bundle, then flip over so that you can see the top surface of the material upside down with its elasticized perimeter facing up. Now pull it away from the frame to release any hidden wrinkles and ensure a smooth fit next time around.
How to clean Britax stroller
Step One: Start by removing any items from your stroller that may have collected debris while it was outside in all types of weather conditions this past year (i.e., blankets, toys).
Once you’ve done this, use a damp cloth or sponge dipped in warm water and dish soap to wipe down surfaces that will be visible after closing up for storage until the next season.
Pay special attention to areas around handles and joints where dirt is most likely to collect on fabric over time. Allow these regions some time to air dry before closing up for storage.
Step Two: Move onto the fabric seat, canopy and any accessories made of fabric (i.e., safety straps). Depending on how dirty these surfaces are, you may need to use a more slippery detergent or cleaner to lift oils from the skin that have transferred over time while your little one was strapped in place during all types of weather conditions this past year.
Once again, make sure not to mix water with soap as it can cause bubbling and leave residue on fabrics when they’re exposed to sunlight which will end up making them look duller once the next season rolls around.
Step Three: If your child’s carseat is compatible with their stroller model – we recommend removing the cover and washing it separately. You can use a general cleaner (like our OxiClean) or dish detergent as well, just make sure to apply the product directly onto stains and let sit for up to 30 minutes before laundering in cold water with gentle soap – but do not mix it with other household cleaners!
The frame of your stroller should be cleaned with mild soap and warm water after long trips out into nature where they may have been exposed to dirt, sand, mud or any natural substances that left residue on their surfaces during toddler time. Make sure all fabric handles are brushed free of dust using heavy-duty vacuum attachment if needed first though so no fibres get tangled within them when wet!
Strollers also need regular upkeep such as tire pressure checks and wheel replacement, which is best left to a professional.
How to fold a joie Nitro stroller
Fold the handlebars of your stroller flat against the backrest. Ensure that they are secured before continuing with these next steps. Push down on the seat to fold it forward, then press in and upon both side handles (located under the seat) until you hear a clicking noise. The Nitro’s front wheels should now be folded down along its underside while its rear wheel will have automatically been popped into place thanks to an internal frame lock! How cool is that?
Once all four wheels are screwed securely in place, pull outwards on each handlebar to release them from their collapsed state inside one another where they can finally rest at angles towards either side of your jogging stroller.
Fold the handlebar up and rest it against the back of your Nitro, using a hand to pull on each side until they click into place there as well. Turn them so that you can hold onto them while pushing down with your other hand from their release position to bring their two ends together at one point before quickly releasing again.