Sometimes a good wall-to-wall curtain is a perfect way to divide a room or cover an unappealing part of the house. Luckily, you can pretty much learn how to hang wall-to-wall curtains using a railing system or simple tension rods.
If you are hanging your fabric between two walls that are less than 120 inches apart, you can quickly solve this issue with some tension rods. You can also try wall-mounted rod brackets and look for an extra-long curtain rod.
However, sometimes you want an entire area covered up, and a 120-inch rod barely covers half of the whole space. Luckily, you can install a ceiling-mounted rail system that goes from one wall to another.
Installing curtain tracks
Luckily, a sound curtain track is not too difficult to install. You can mount them onto your ceiling with simple tools such as a drill, a screwdriver, and a laser level. It is a quick and straightforward process.
Step 1: Measure your width.
Take your measuring tape and measure the distance between the two walls. You need to know how long your rail system has to be. There are track systems with splicers connecting to another track section for longer distances, creating a seamless rail across the ceiling.
It’s also important to know if you will need single tracks or multiple-track installations. Take note of how many channels you need to cover the width between the walls fully.
Step 2: Select a track system.
Multiple track systems can either offer a splicer for easy connection between two pieces. Otherwise, you might need to align and connect them manually during installation. You will need additional hardware sets to minimize the seam and create to reduce the seam and create a straight alignment entirely.
You can also choose from the wall or ceiling-mounted tracks. Decide which one suits your home best. You might also want to consider the colors like white, black, or clear-colored tracks. Some shops even offer colored railing systems.
Step 3: Install the rails.
Use a pencil and a laser level to mark the wall or ceiling. Indicate the placements of the rails. You might want to borrow a laser level to create a seamless track installation for wide spaces. Mark and drill the holes across the surface.
For aluminum tracks, use a small bit to drill pilot holes at the center of the slot through the top of the track. Once you have placed it in the correct position, screw the bolts and install them onto the wall or ceiling. Be careful not to damage the track system when mounting it.
Step 4: Hang the curtains
Use a simple curtain hook and attach it to the curtain. You will notice that the rail already has built-in eyelets or tiny loops where you can slip the hook through. Insert the curtain hook through the loops and repeat for every panel.
Don’t skip any eyelet to ensure that you don’t leave gaps in your curtains. Install a pull wand in the middle of the track to quickly draw your draperies open or closed. Adjust the curtains as necessary.
Tension rods
You can also learn how to hang wall-to-wall curtains using a simple tension rod. This method only works for short distanced walls because rods typically come at limited lengths. Luckily, it is much easier to do, and you can use this method to hide particular areas in the house.
Buy an appropriate-sized tension rod and attach as the manufacturers instructed. Adjust the two halves by twisting them in a clockwise or counterclockwise direction. Prop them between the space and tighten the shaft.
Hang your curtains using any curtain hardware such as ring clips, drapery hooks, or do a rod pocket curtain. You can also slip on a tab top or hidden tab drapery for a floating effect. It is a great way to hide washing machines or create a barrier between the toilet and bath.
Additional tips
If you adore hanging curtains on rods, you can opt for multiple ceiling-mounted rods hung side by side, especially for large spaces. However, that won’t exactly give you a seamless effect. You will not be able to slide the panel entirely from one side to the other.
If you want to hang your curtains from one wall to another to create a divider, opt for ceiling-mounted brackets. These are perfect if you’re going to divide an open floor plan into particular areas.
Just like hanging regular curtains, you might want to consider the width and length of your fabric. Even if you are using the curtain as a room divider, try to make it look full instead of flat. It will help you instill an aesthetically pleasing design with practical and cost-efficient benefits.
Choose a curtain that serves its purpose. For instance, if you want complete privacy, opt for thick or blackout curtains to completely shield one area from another. On the other hand, you can use sheers to soften the room and create a subtle division between spaces.
Overall, it is not too difficult to learn how to hang wall to wall curtains. It is also beneficial if you know how to do it on your own. There are going to be instances wherein it seems practical to hide particular areas such as the washer or the laundry room. Always be discreet with style.