How to hang curtains on windows with crown molding?
The most efficient way of installing your curtains is by hanging them. This way, your living space will be brighter and airier.
It might as well highlight the view outside your window.
In any case, you might have decided to display wide crown molding of your window by sacrificing a little bit of your scenery and sunlight.
A few types of wide molding, just like the ornate crown molding, for example, deserves flaunting.
But it would be best if you cover the bulky and less attractive trim of the window.
Either way, you can make it work depending on the framing of your window.
Here’s how you should do it!
Steps To Hang Curtains On Windows With Crown Molding
Wondering how to hang curtains on windows with crown molding?
Below are the easy steps to follow:
Step #1. Considering the width of your window
To maximize your view of the pleasant scenery outside your window, you must install the curtain hardware beyond or outside the crown molding.
The same is true if you intend to flood your room with a tremendous amount of sunlight possible.
You have to remember that even when you open or stack back your curtains, it would still take some space.
If possible, the stacked fabric must not block off the natural lighting coming to the room or hide any of the beautiful views outside.
So what you needed to do in this step is to slip the curtain panels to the rod. Make sure to have someone that can offer you a hand.
That is because you would need help in extending the curtain rod with the curtain hanging onto it across the area of the window.
Neatly stack the fabric back towards the sides to determine if many inches of the wall space will take up.
Doing this will help you in determining if how far out you should mount the curtain rod.
What you are going to achieve here is an illusion of having larger or wider windows.
Step #2. Figuring out the height requirement
After you have figured out the appropriate width for your curtain rod, you now have to determine how high the rod should go.
This step is straightforward. You have to hang the curtain rod right under the ceiling of the room.
But remember to leave about an inch or two above the curtains so that your window treatment will not look crowded or tight.
This one is the trick that many interior designers commonly use to make the most of a room’s height.
They are simply stretching the room visually by using the length of the curtain.
But if your space has an extremely tall ceiling, you should not install the curtain rod beyond 8 inches from the upper trim of the window.
It also applies if you are living in a two-story space.
Step #3. Mounting the curtain rod
Even if your situation involves a corner window sitting tightly against one wall, you should not mount the rod onto the wide molding.
Instead, install the curtain hardware almost to the height of the ceiling. It must be far enough passing the window.
The drapes must be stacked back to the side that is opposite the corner. This way will expose the entire surface of the window.
If you are hanging the drapes over your glass sliding doors, you must also push the drapes to the side that is opposite your access door.
You will need to mount the curtain rod further out towards the end to maximize natural light in such a case.
Step #4. Hiding or showcasing the molding
If the crown molding does not look pretty for you, you can add a valance onto the top of the curtain panels.
It will not only hide the molding but will also conceal its upper trim.
Commonly, curtains with valance won’t extend towards the ceiling due to the length of the topper, but you can do it for as long as you hang them properly.
You will be able to reveal the view, maximize the natural lighting, and achieve an excellent window treatment.
More so, you can hide the molding’s side by simply aligning the curtains with the inside edge of the window frame as you pull them open.
But if your window has ornate crown molding, it would be a waste if you cover it with your curtains.
Just leave that good-looking trim work on display by mounting the drapes inside.
To install inside mounts, you need to place the brackets high inside the frame of the window.
Do this the same way you mount a tension rod for your shower curtains.
However, in this option, your curtain fabric will take some of the views. It will also block off some natural light.
So it would be best to opt for sheers or light-filtering curtain panels.
But this would require you to install a light-blocking shade that you can roll up behind the curtain for light control and privacy.
Do you have problems finding curtains that would match your tan walls?
Then click here.
Nevertheless, that is all.
It’s A Wrap!
Although the task can look very intimidating, you can succeed in this project by following the steps provided above.
That is how to hang curtains on windows with crown molding.
Best of luck!