How To Fix Gas Issue In Stove? 4 Astonishing Problems And Solution!

While fixing your breakfast, you realize there is something wrong with the gas stove in the kitchen and wondering how to fix gas issue in stove. No worries, this article will guide you through troubleshooting the gas issue in the stove, whether it is a range or build-in.

Understanding how to fix the gas issue in a stove is important as the gas stove is one of the most used essential appliances in the kitchen, it is crucial to recognize the problem in the stove so you can fix it. 

how to fix gas issue in stove

Comparing gas stove ranges to electrical stoves, the former has many advantages over the latter. Gas stoves heat up instantly, are cost-saving, and preservers electricity. In a power outage situation, you can still fix your meal, which won’t be possible with the electric stove. However, a gas stove requires to ignite the burner to be able to cook.  

 

Problems And Solutions To Fix Gas Issue In Stove 

Few gas stove problems that many homeowners encounter and solutions to fix gas issues in the stove are described below. So, how to fix gas issue in stove?

 

Problem #1. Weak or uneven flame

If the burner has a weak or uneven flame and is burning slowly,, it is most likely accumulated with food particles or grease. A dirty burner head is the most common problem and prevents the burner from solid ignition. A straightforward solution to this is cleaning the gas stove cooktop. 

Before cleaning the stove make sure to turn off the gas supply. Remove the grate and detach the burner head, you will see there are few small slots that envelopes the burner head, the blockade in these slots prevents ignition. 

Soak the grate and the burner top in warm soapy water so that all the grease can come off quickly. Then, toen, to clean the burner slot, scrub it with a rigid toothbrush to remove all the clogged material. 

Do these after every few days to prevent the building up of debris and to avoid inconvenience.  

 

Problem #2. Clicking afterburner is switched on

If you are unable to ignite the burner or it is clicking long after you have switched on. There must be some blockage that is preventing the stovetop from working; it can either be due to the accumulation of debris or liquid overflow into the spark module. It can also be due to the wrong positioning of the burner head.   

Puffy Lux

Please switch off the appliance, take out the burner and let it dry. Meanwhile, clean the stovetop with a dry towel and place the burner back again. Make sure the burner cap is appropriately mounted.

The function of the burner cap is to prevent gas from spreading. Gas comes out through the holes in the burner head, and if the burner cap is not aligned with the base, the flame will blow upwards, or the burner will not ignite at all.  If this trick doesn’t fix the gas issue, will have to replace the spark module. To help you know to replace a spark module in stove

 

Problem #3. Color of the spark

If the color of the spark at the ignitor is yellow or orange instead of white with a blue tint and the ignitor is not producing enough spark to ignite the gas. You need to replace the ignitor, use a nut driver to remove screws from the base of the ignitor that attaches it to the burner compartment, and pull off the wire connection removing the old ignitor and replacing it with the new one. If I were you, read on how to replace oven ignitors

 

Problem #4. Low and even flame 

Low and even flame indicates the need to replace the control valve. The control valve administers the gas pressure to the burners. It allows you to control the power of the flame on the stove. If the flame is flickering and you cannot turn the flame on high, it is most likely from the faulty valve.

The gas control valve on the stove is stationed behind the burner knobs. Before replacing the control valve, make sure to switch off the gas supply to your stove for the sake of safety.

Gas control valves are situated at a slightly different position on the cooking range and a built-in cooktop.  

To have access to the control knob for the built-in stove, you will have to pull out all the knobs, remove the burner heads, and finally take off the main cover of the stove. But if you are using the range, you will have to open the oven door and remove all the screws on the upper edge, subsequently remove the cover from the knobs.  

Once you have reached the control valve, remove the spark switch and disconnect the gas tube from the valve using a wrench. Next, remove the old valve and replace it with the new one. It is highly recommended to call a technician to replace the control valve.  

 

To Conclude

Now you know how to fix gas issue in stove. It’s important to understand that you can fix the gas issue in the stove by yourself most of the time. To avoid problems with the stove, it requires good maintenance and cleaning, which will make the stove last for a more extended period. If the gas issue in the stove persists and occurs frequently, it is better to replace the stove. Until here, my friends! So, for more stove articles, check out how to hookup a gas stove and why won’t my gas stove light on. Thank you for reading!

Leave a Comment