Do you have any idea on how to cut a mattress in half? Sometimes when your mattress is too big, and you want to make the most out of it, you can cut it in half.
When you have an oversized bed and divide it in half to maximize its use well, you can do that.
All you have to do is find a useful guide and make sure that you follow all of the suggested steps or instructions.
In that way, you will lessen mistakes, and you can have your awaited mattress parted into two parts. It is now up for use in two different frames and rooms.
Well, not everyone can afford to buy another set of the quality mattress for another set of beds for a different room.
Why not buy a king-size bed or any big bed and divide it into two? At least it has the same material that provides the same comfort.
Steps To Cut A Mattress In Half
When you want to create a more usable and two beds out of a single mattress, then this article will help you out.
Imagine being able to share your bed without really sharing it.
That’s what you would feel when you are thinking of dividing your mattress in two.
At least you don’t have to sleep with someone on your bed.
Sharing just the bed or mattress alone is a better choice.
How to cut a mattress in half?
So here are simple steps on how you should cut your mattress in half.
Step #1. Gather the materials
When cutting your mattress into half, you would need some things to gather.
In this way, the whole process will be easier and faster.
Things that you will need include a tape measure, wax, thimble, straight pins.
These are usually used for sewing purposes, so it is easy to find.
For cutting, you’ll be needing scissors, pliers, a sharp scalpel or knife, and some tool called Dremel having a fiberglass reinforced cutting wheel.
And for tying it up back or closing the end where you cut, you need a staple gun, a sewing machine or needle, and strong sewing thread.
Step #2. Cut through the outermost layer
The first thing you will have to do is to grab your scalpel.
With that, start an incision on the outer covering that should be softer.
And then, cut down the center of your mattress using scissors, exposing the most inner layer of the springs.
Step #3. Measure to cut
After that, have your tape measure with you, locate the midpoint, and then leave a mark on your springs where you will be cutting with a sharp scalpel.
It would help if you had the markings visible to avoid mistakes when cutting through.
Step #4. Cutting through the springs
In this step, you will need your Dremel tool to cut down the line you marked earlier with your scalpel.
You have to be very careful not to injure your fingers.
You have to hold this tool steady because you wouldn’t know that any time without proper positioning could break off the wheel.
Resort to pliers as your last option when your Dremel can’t cut off some hard remnants of the spring.
Step #5. Fold and secure
Knowing that you cut through the springs, you have to make sure it is not sharp.
Get the pliers again and fold every end of the spring inwards.
This way, you can avoid injuring yourself or someone that sits or sleeps on it.
Have a piece of cloth and a rope would work too.
Having the springs of the new section, tie it together. It is vital for support.
Step #6. Sewing the ends
So after cutting through your mattress, you will need to make both cuts to a good-looking bed and make it presentable.
With that, you have to cover it up, and you should close its ends.
Using your spare mattress cover, or you can buy a new one.
It will serve as the key in closing the ends of both mattresses where you cut through.
Just decide depending on what’s more comfortable for you.
Have in your sewing needle and use it in sewing the end of the mattress. Using safety tools is also advisable such as using a thimble.
Remember that I listed wax earlier?
That isn’t for your underarms, or so it has its purpose here. It will serve as a lubricant in making sewing easier.
You will put it into the thread to soften it up. After that, using a staple gun, staple the ends properly and cut out the excess cover.
Just do the same on the other cut of the mattress since you now have two beds after cutting it out.
Your safety matters; don’t skip a step.
Conclusion!
You always have to be initiated to make things better.
Instead of having one mattress, you can have two out of it.
Good thing we answered, “How to cut a mattress in half?” worry no more because you are on the right track.
It is always not good to share beds, so cut it instead and give it to the other person so that your sleep won’t be affected.