How to convert a crib into a toddler bed? Well, you could remove or lower the guard rail if you prefer.
You can save time and money by converting your child’s cot into a toddler bed whenever it’s time to change his or her sleeping quarters.
The most straightforward solution is by using a universal guardrail.
If it doesn’t fit or you choose to take on a difficult project, you should also trim down several main sides to make a toddler frame.
One way to convert a crib to a toddler bed is using a guardrail for a convertible crib.
Steps To Convert A Crib Into A Toddler Bed
A convertible crib could be a great example of making a toddler’s bed.
Here is how to convert a crib into a toddler bed:
Step #1. Pick a guardrail that suits your needs
You’d be required to buy a separate toddler bed rail unless your child’s crib came with one.
The bars on toddler beds are shorter and narrower than those on crib sides.
Your child should be able to get in and get out of bed on his or her own.
The guardrail should prevent him from falling out of bed while he or she is asleep.
A universal toddler guardrail kit is usually the best choice.
The rail will fit most newly constructed cribs, and the package includes the necessary metal hooks and screws for installation.
Step #2. You should remove one crib side
Using a manual or electric screwdriver, remove the screws holding each part of the bed in place.
After cutting the screws, you must be able to pull the side away successfully.
Many screws, varying on the crib’s brand and model, can be located around the crib’s posts.
Throughout many instances, only one-half of the crib would need to be removed.
If both ends are chopped, you’ll have to use a baby rail on one side or position one end of the crib against a wall.
This will only be applicable for convertible cribs.
Since stationary cribs don’t have reversible sides, you will never utilize another converting method.
Step #3. You should remove the bedding
When assembling the guardrail, you’ll need to cut the crib’s linen and mattress first to have access to the bed’s bottom slats.
Remove the bedding from the space.
You should use the same mattress and sheets after converting the bed since the dimensions would not change.
It will be easier to complete this task once you’ve removed one part of the bed.
However, if you want to get to the bottom rails, detach the mattress and sheet first.
Step #4. It would help if you fixed the brackets to the rail
Each rail post should have at least an L-bracket on the inside.
Using screws and a screwdriver, fasten the brackets to the posts.
Guardrail kits may include the necessary L-brackets and screws, but you may need to purchase extra components just in case.
On each side of the guardrail posts, you must attach one bracket.
Place the bracket so that the pot’s bottom is level with the foot of the bracket.
It would help if you matched the middle of the post with the vertical part of the bracket.
To mount the bracket to the post, use two screws.
Step #5. Place the rail in the desired location
Raise the railing and put it across the bare side of the bed.
Place the rail so that the side posts with brackets are aligned with two distinct slats on the rim of the bed.
If you allow too much space on each side of the rail, it will be easy for your child to get in or out of the crib.
Step #6. It would help if you secured the rail to the bed
Additional screws should be placed into each support’s additional holes, then into the slat rolls at the bed’s end.
Do this while keeping the rail steady. Each bracket would need two screws.
For the safest, hold the bracket in the middle of each slat.
Try to ensure the screws are secure and will keep the brackets in position.
When you’re done, try wriggling the rail.
Make sure that guardrail must not be moving.
Step #7. Make a clean bed
Return the mattress to its original position in the bed until the guardrail is in place.
You can use mats, blankets, and cushions to cover it if necessary.
At this point, the kid’s bed must be safe to use.
Repeat the instructions above if you ever need or want to add an additional rail on the other side of the room.
Make sure all rails are in place before restoring the bedding and duvet.
Conclusion
Although there is no set age that a toddler can step out of the crib.
Well, most toddlers do so between the ages of 18 months and 3 1/2 years, preferably as close to age 3 as possible.
Every child is different, so whether he’s reached 3 feet in height, commits daily jail breaks, or regularly begs for a big-kid bed.
You should use the guardrail method for a convertible bed in converting a crib to a toddler’s bed.
It can ensure that your child is safe from falling when he or she moves a lot.
But it just depends on the child using it.
That’s how to convert a crib into a toddler bed.