Hampton Bay is a well-known and respected company in the furniture industry. They make high-quality products that are often sold at affordable prices, which makes them popular among many homeowners.
One of their most popular pieces of furniture is the Hampton Bay Swivel Rocking Chair. This chair can be built by anyone with enough patience and skill to follow these easy steps.
How to Assemble Hampton Bay Patio Furniture
Step One: Find a level and stable surface to assemble the chair on. You can do this by laying plywood or any other type of flat material over your uneven ground, as you will be using both hands to put together the furniture.
Step Two: Place two pieces of wood parallel with one another on top of the flat surface
Step Three: Place the seat on top of these two pieces, making sure that it is centred
Step Four: Screw in four screws to the rear legs. Make sure they are screwed tightly and firmly into place on each leg before placing them onto the flat surface
Step Five: Place one piece of wood horizontally across both ends of the chair’s backrest. This should be done with a screw at either end for stability purposes.
Step Six: Repeat steps five to six by adding another horizontal board just below this previous addition to form an “X” shape with three boards total where you will eventually attach all four legs when assembling your Hampton Bay Swivel Rocking Chair!
Step Seven: Attach the two rear boards to the front of your chair by drilling a hole into each board and screwing in one-inch screws
Step Eight: Drill holes through both upper horizontal pieces as well as through any remaining vertical posts. Place four screws evenly spaced apart on either side at even intervals.
What is Hampton Bay Swivel Rocking Chair?
Many people don’t know what a Hampton Bay Swivel Rocking Chair is. The swivel chair has been around for over 100 years, and many different variations exist today. One of the more common ones are rocking chairs that can be lifted off the ground with their unique four-legged base.
This type of Hampton Bay Swivel Rocking Chair was introduced in 1909 by an American named Thomas Smith who originally manufactured them in his garage as backyard furniture for friends and family members! These days you’ll find these types of rockers from various manufacturers all across America!
Features of Hampton Bay Swivel Rocking Chair
The Hampton Bay Swivel Rocking Chair is typically constructed with a rocking back and seat that can be adjusted to swing from side to side.
A long arm on the chair connects to an axle or spindle in which it rotates around, allowing users to rock themselves gently as they rest. The four legs of the chair are usually made out of wood while its frame often comes in pine or cedarwood.
Typically, these chairs weigh between 50 and 100 pounds when fully assembled – not too heavy for one person!
This type of swivel furniture has been popularized by both teenage girls who want their own space within their room and mothers looking for somewhere comfortable to feed their baby during nighttime hours.
Steps on Building Hampton Bay Swivel Rocking Chair
Step 1. First, you need to gather your tools and supplies. You will need a power drill with screwdriver bits, a Phillips head screwdriver, safety goggles (in case any pieces of wood fly at you), pliers (for bending wire hangers or nails into hooks), scissors for cutting the rope down to size, an electric saw (to cut boards so they fit together nicely).
Step 2. Next, start building by following these easy steps: **pick up one board and lay it along the ground horizontally across two other boards to create three sections that are 12 inches long each.
This should give you five spots on which screws can be inserted without interfering with another part of the chair. The top section is the one that should have the most screws in it.
Step 3. Next, remove each board from its horizontal position and put them on end to create six sections with four spaces for screws between boards
Step 4. Once you’ve done this lay all three sets of boards back down horizontally but make sure they are tilted at a 45-degree angle so the top section is higher than any other part of your chair. Now use a Phillips head screwdriver to insert as many screws into these joints as possible before fully tightening
Step 5. Then place hooks or wire hangers around the post (where slats meet) and twist ends together tightly then cut excess pieces off using scissors. If you want more stability in posts uses two metal plates inserted perpendicular to the post. Now it is time to flip the chair right-side up and place four screws into each of the posts (the slats should be on top) then use a Phillips head screwdriver to tighten them
Finally, finish off by adding a seat pad or any other special touch you want.