A decent loveseat will never let you down. However, we cannot avoid instances like its frame cracking. That is why we are here to teach you how to fix wooden frame on loveseat.
What to do before fixing a wooden frame on loveseat
The frame might bow or the wood joints might have splintered due to wear and use. After a little investigation, you may repair a damaged loveseat may by using a few tried-and-true procedures and the proper equipment.
You must first, grasp how a frame is put together. You will need to go under the problem to accomplish this. Examine your precise loveseat frame. You can search this up online, or just flip the huge piece of furniture over and inspect the problem yourself.
A tiny coating of cloth may be present on the loveseat’s bottom. Feel your way down the frame’s spines until you detect wobbly or damaged portions. If you notice bent metal pieces or wood slats that are starting to crack, the integrity of the frame is being compromised.
A simple remedy, such as wrapping the wood to give it more support or gently straightening any bent metal elements, can be undertaken.
For hardware, you will be needing any upholstered wooden frame on+ loveseat. And you will be needing the following tools:
- staple gun
- staples
- flat-head screwdriver
- pliers
- cordless drill
- drill bit set
- fine-threaded drywall screws: 2 inches, 1-1/4 inch
- quick grips
Fixing a wooden frame on loveseat
Now, here are the steps on how to fix wooden frame on loveseat:
Step#1: Flip over your loveseat
The first step on fixing a wooden frame on loveseat is to lay your loveseat on its back for this repair. The main aim is to gain access to the material covering the bottom of the loveseat so that you may pull the appropriate staples to gain access to the frame within.
Step#2: Remove your legs from the regions where you will be operating
You must remove the legs. This is due to the fact that you will be working on the top two corners as well as unscrewing the two front legs. Not to worry, you will fasten these wooden legs onto your loveseat again later on.
Step#3: Pry the staples off the bottom covering the material’s edge.
The next step in fixing wooden frame on loveseat is to cover the edge. To get beneath the staples, use a tiny flat screwdriver. This will make removing the staples simpler and cleaner.
Take care not to pierce the leather or other material that your couch is being coated with. If you are really cautious, you may be able to entirely remove the staple, but most of the time you will only be able to remove one side of the staple. Simply take the staple out using pliers in such cases.
Once you’ve gotten enough staples out, you may pull back the cloth and peek inside. The main section of the sofa was effectively held in place by one bolt on each side and some staples, which were insufficient.
Be generous with the staples so you have simple access to the insides of the couch. You would end up removing more to allow more access numerous times, and you can always go back and remove more later, and you can simply remove them all if you were to do a substantial repair.
Step#4: Perform any necessary re-alignment of the couch frame.
To re-align the two sections, use a fast grip to pull diagonally from the outside board to the bolt on the inside.
Step#5: Drill pilot holes for your screws
Because we are working with particleboard, you should drill pilot holes for your screws. This is especially crucial for screws at the board’s edge since you might blow out the board’s edge due to the particle board’s fragility.
Drill the pilot holes using a 3/32′′ drill bit. Just remember that before drilling the holes, make sure the frame is properly aligned.
Step#6: Install your screws
Screw the screws into the frame to hold it together. Align the seams and close the gaps.
Step#7: Repeat as needed
Don’t be afraid to use a lot of screws. You don’t want to go through this again, so now is the time to repair your couch once and for all. If your sofa is severely broken, you may increase strength by placing 2x2s along the seams and screwing them in place.
Step#8: Reattach the upholstery to the loveseat’s bottom
Fold the material’s edge over, like it was initially. To prepare the material for stapling, repeat the preceding folding pattern. Repaint the material with staples.
Begin by stapling the corner, then work your way along each edge. You can notice the difference now that you have fixed your loveseat’s frame.
Step#9: Replace the loveseat’s feet
Screw the feet back in place. After that, you now have a new wooden frame on loveseat that you can use and enjoy.
How much does it cost to have a loveseat frame repaired by someone else?
Repairing a broken furniture frame costs between $480 and $1,000. Furthermore, the cost of reupholstery services is an extra $975 or more.
What is the expected lifespan of a wooden frame on loveseat?
Consider replacing your loveseat before the seats begin to droop to the point of no longer supporting you, the fabric becomes soiled and faded, and the structure begins to break down or creak. You have to know how long your furniture lasts. A standard couch or loveseat lasts between 7 and 15 years on average.
Conclusion
Do not throw your furniture away when its frame starts breaking. There is still a chance for you to fix your loveseat. Just follow these steps on how to fix wooden frame on loveseat. With this, you wouldn’t have to say goodbye to your beloved loveseat, again!