Why My Samsung Dryer Won’t Stop Running? 8 Surprising Reasons!

Why my Samsung dryer won’t stop running? This is the question you may be concerned about: a faulty dryer door switch, malfunctioning circuit board, blower well, heating element issues, and many others are the reasons for this problem.

Samsung has been a well and dependable name for a wide range of home goods. Naturally, while working with any type of equipment, you will almost certainly have to diagnose an issue. There have been allegations that Samsung dryers would not switch off after a cycle has been completed and the electricity has been switched off from the unit.

Why my Samsung dryer won’t stop running

Accessing and disconnecting all circuit board parts can simply and quickly fix a Samsung dryer that won’t shut off. The Samsung dryer may work correctly when all parts have been disconnected, checked for rust, and connected again. We’ll go over the reasons for this problem in-depth, so let’s get started!

 

Why Won’t My Samsung Dryer Stop Running?

The clothes dryer is one of the best things that help you in winter, but if you have a Samsung dryer, you must wonder why my Samsung dryer won’t stop running? The reasons for this problem are listed below:

 

#1. Flow of air

The airflow through the dryer will be restricted if the exhaust is blocked or partially obstructed, lengthening the drying time significantly. You must clean the ventilation system of your Samsung dryer at a minimum once a year to guarantee proper dryer operation.

 

#2. Blower wheel  

In your Samsung dryer, a blower wheel is a piece of equipment used to blow air. It pushes air out of the exhaust after drawing it through the dryer. Socks, lint clumps, and tiny bits of fabric can all become trapped in the blower wheel if they get past the lint filter. A blower wheel cover also can break out, causing it to oscillate on the drive system.

It might take too much time to dry garments if the blower wheel is clogged or faulty. Disconnect the dryer vent and check the airflow intensity to see if the blower wheel operates correctly. Inspect the blower wheel for blockages if the air circulation is poor. If there are no blockages, try spinning the blower wheel manually. Replace the blower wheel if it wobbles while turning.

 

#3. Solenoid issue

In a gas dryer, there are three or possibly multiple gas valve solenoid coils. By opening the gas valve outlets, the gas valve solenoids permit gas to exit the combustion unit. If the gas valve solenoid fails, the dryer will not run. Examine the igniter for any damaged gas valve solenoid valves. If indeed the igniter lights and afterward dies out without lighting the gas, then the gas valve solenoid is faulty, due to which your Samsung dryer is unable to stop running after the cycle is complete. If one or maybe both gas valve hinges are broken, we recommend replacing them all.

 

#4. Defective heating element 

Before air reaches the dryer drum, it is warmed by the heating element. The heating element may become damaged over a period. The garments will take much more time to dry if the heat source isn’t working.  You can quickly test for continuity with the help of a multimeter to check whether the heating element is blown out. Replace the heating element of your Samsung dryer if it isn’t working.

 

#5. Assembly of the heating element

The heating element warms the air when it enters the dryer drum. Whereas if the heat exchanger is not turned on, the drying duration will significantly increase. Look for continuity with a multimeter to verify if that heat exchanger has burned down. If the heating element stops working, replace it.

 

#6. Lint filter 

The lint filter may be blocked. Fabric softener or dryer sheets can form a deposit on the lint filter, decreasing air circulation. Clean the clogged lint filter and check if it solves the problem.

 

#7. Moisture sensor

It is used to watch the moisture level of the garment and delivers information to the control board when it becomes dry. If the moisture sensor fails, it may incorrectly claim that the garments are still damp, forcing the dryer to continue even when the garments have completely dried. This isn’t always the case, though. When changing the moisture sensor, ensure all other parts are in good working order. Replace the moisture sensor once you’ve established that all aspects are in good working order. 

 

#8. Thermostat

The cycling thermostat regulates the air temperature by turning off and on the heat. The dryer will not heat if the cycling thermostat is malfunctioning. This isn’t always true, though. When replacing the cycling thermostat, make a list of all the components that are most likely to fail. If the majority of the critical components are in acceptable order, and operating order, check the thermostat for continuity with a multimeter. Replace the thermostat if there is no continuity. You may also be interested to know about test a dryer cycling thermostat.

 

It’s A Wrap!

We hope you’ve got it, why my Samsung dryer won’t stop running. We have discussed all the reasons for this problem above; read them carefully to understand them well. Thank you, friends, for reading this article at the end! You may also want to read about what does f70 mean on a whirlpool dryer and how much does a dryer weigh.