Why Is The Dryer Blowing Cold Air? Read These 3 Surprising Reasons!

Are you worried about why is the dryer blowing cold air? The most common cause of your dryer blowing out cold air rather than hot is that it has an overheated or sometimes faulty thermostat. If the dryer has no reset button, then, in this case, your thermostat and thermal overload cut-out will most likely need to be replaced (TOC).

The thermal overload cut-out plays a critical role in the dryer, and it was designed to stop the dryer when it becomes excessively hot automatically.  Companies are required by law to guarantee when the dryer overheats, and it may have a specific sort of safety feature to keep it from burning up.

why is the dryer blowing cold air

Yes, my friends, it’s all true about it. So if you are interested in this article and want to learn more at the end, continue reading this article. We’ve put up a quick guide to help you figure out what’s wrong with your clothes dryer as well as how to solve problems. Below we have discussed in detail why a dryer gives out cold air. So let’s have a deep look at it!


What Causes The Dryer To Blow Out Cold Air?

So, why is the dryer blowing cold air? The more typical issues with electric-powered dryers are faulty open heating elements or thermostats. In the heating element circuit of your dryer, there have been at minimum two thermostats: a cycling thermostat or a high-limit thermostat and depending on the type. 

The cycling thermostat generally turns on or off the heating coils. The dryer produces frigid air if the cycling thermostat gets locked inside the open spot. The high-limit thermostat is a security feature that prevents the dryer from exceeding extreme temperatures if the cycling thermostat fails to activate at the desired temperature. 

The high-limit thermostat is often a thermal fuse; if such a thermal fuse gets burnt out, the dryer will blast cold air. Thermal fuses are not resettable and must be changed. 

That’s a great idea to buy the cycling thermostat together at the same time as the thermal fuse since it’s likely stuck in the resting position, allowing the dryer to exceed dangerous levels. If you notice that the thermostats appear to be in good working order, examine the heating components for persistence. 

Due to contraction and expansion, the conductive material element cable might deteriorate and fracture throughout time. In addition, if the dryer warms upon such timed levels but blasts cold air upon others, the clothing dryer’s timers exacerbate the failure. You may also want to read about why is my dryer taking so long to dry.


Why Dryer Becomes Too Hot?

As discussed earlier, overheating of the dryer cause the dryer to release the cold air. Below we have written why the dryer becomes overheated and causes the dryer to blow out cold air instead of hot air. 


#1. A clogged filter

The filter was not cleaned regularly. Dirt may accumulate and restrict the air movement if the screens are not cleaned after each usage. The air circulation pulls cold air inside to retain the heat down when operating the dryer. Obstructions are a fire risk, yet they nearly always lead your dryer to overheat and shut off. If the dryer may not have a restart button, getting it to function again won’t be relatively as easy as wiping it out just as the breaker has blown. You’ll have to change the heating components. Here’s how to tell if your dryer vent is clogged.


#2. Opening the door in the middle of the cycle

Tumble dryers require some time to cool down, completing a spin cycle. Whenever you unlock the door, be sure this would be possible. You risk tripping the TOC if you do not even wait a few seconds after pulling your clothing from the dryer. Rather than opening the tumble dryer inside the middle of the process or just after it finishes, follow the timers and then allow it to settle. Know how to select the correct dryer cycle


#3. Overloaded of dryer

If you stuff excessively inside the dryer, then circulation will be obstructed, allowing heat to increase and perhaps overheating. Although your user guide should provide a rated limit, a helpful tip is that your drum must be 50% filled. The assumption that numerous items cost enough power is a typical cause for overloading a tumble dryer.


What Is TOC And Its Function?

The thermostat monitors the tumble dryer’s temperature. It is attached with a heater element and unfolds the connection, elevating and lowering the temp. Whenever the thermostat detects that the component seems too warm, this should shut the circuits well with the element. Thermal overload cut-out or TOC guards prevent overheating by tripping the breaker and preventing the dryer from heating up. That can often be adjusted, and more often than not, both the TOC and statistics will have to be changed. 


It’s A Wrap!

We were hoping that reading this article is just fun for you, and after reading it, you all will learn why is the dryer blowing cold air. Above we have mentioned the basic reasons for this problem. So, the most common is overheating of the dryer. Also, we have written what caused the dryer to become overheated. Thank you, friends, for being with us at the end. The last thing is not to forget to share this article with your friends if you like it!

Leave a Comment