Which Pressure Washer Nozzle For Car? 4 Best Options!

Which pressure washer nozzle for car should be your choice? Of course, this is none other than the white-head form of the nozzle. But then, the choices are limitless in this case as the red-head type of nozzles, yellow-head type of nozzles, and green-head type of nozzles.

Choose from any of these when you clean up your car as they are good but demand a specific moderation level.

A pressure washer can damage your car, especially when not using it properly. In choosing a pressure washer nozzle for your car, it’s always better to opt for a white-head type of nozzle. The best explanation will be discussed below to use in various pressure washers. But, my friends, there are more things that you should know, so without further ado, let’s start!

 

Which Pressure Washer Nozzle For Your Car?

So, which pressure washer nozzle for car? Below are the different pressure washer types of nozzle suitable for your car.

 

#1. Yellow-head type of nozzle

This nozzle opening is relatively bigger as compared to a red-head type of nozzle. Nonetheless, a yellow-head type of nozzle is suitable for removing dirt from difficult-to-reach surfaces and sidewalks. Never make use of the nozzle when you pressure wash a vehicle.

 

#2. White-head type of nozzle

This White-head type of nozzle is suitable as the safest option to consider for cars. This is an excellent tip as a pressure washer for a car. It does clean areas more effectively than any other type. In addition, it has a spraying velocity suitable to rinse off detergent in the body of a car. Use the nozzle to wash vans, trucks, cars, and SUVs.

 

#3. Red-head type of nozzle

This nozzle type features the littlest opening while it forces the water to come out with an even more vital force as compared to other nozzles.

 

#4. Green-head type of nozzle

This green-head type of nozzle is helpful for washing a car. Nevertheless, please do not use it when you spray the body of a car due to its high velocity.

 

Other Pressure Washer Nozzle Types

Consider these pressure washer nozzle types below if you want more options.

 

#1. Turbo nozzle

The Turbo nozzle makes an excellent alternative to the red nozzle for providing similar pressure. However, this has an unusual spray angle. This circular type of rotating water jet blasts all that tough dirt and removes rust from the concrete. It strips off the paint on the surfaces in just a few minutes.

 

#2. Variable/adjustable nozzle

This is a six-in-one pressure washer nozzle that can get the chore done right away. This is indeed a godsend for those who like different settings. You can easily do a quick change with those six patterns, such as zero degrees, fifteen degrees, twenty-five degrees, and forty degrees. Plus, you can do it with soap and a rinse. This nozzle will save you much time as you do cleaning work. Use this fantastic product to change the standard nozzles.

This is indeed an excellent tool to utilize. Plus, this nozzle type is efficient and lightweight, with a smaller body utilized plus an integrated design. This is a lot better than any other same models coming from manufacturers. The standard one-fourth inch plug complements the most famous brands.

Check out this pressure noozle chart.

Tips Affecting Water Pressure

Water pressure serves to measure the amount of water that exits in a nozzle. The tip of a pressure washer is helpful in controlling angle, V-shape using a spraying wand. Plus, it determines the way water is released. The various nozzle angles help adjust the different needs, like cleaning grease away or washing the area gently. This is also with a strong jet stream from the different nozzles in any degree chosen.

It will help if you follow a few things like being extra careful of damaging surfaces.  Start four feet and move as nearer as necessary. Begin with a lower PSI and then, increase when necessary. The range falls between one-thousand two-hundred to one-thousand nine-hundred PSI. This is so far the best range when you wash a vehicle using a pressure washer.

When this does not work, better to change the nozzles more intensely for the stubborn areas, keep the distances in the easiest way possible to adjust the pressure washer effectiveness. This is indeed needed when it comes to pressure cleaning. I guess it’s helpful to read about why is my pressure washer not building pressure.

 

Ways To Pressure Wash A Car

Follow the ways to pressure wash a car without you harming the paint.

• Park the car directly below the sunlight. It’s improper to wash the car below direct sunlight. Foams will only dry up quickly while water spots also form.
• Prepare detergent or car washing solution, a pressure washer with a white or green nozzle, a microfiber towel and bucket, and a reliable water outlet.
• Get the car wet using clean water.
• Pour in a detergent or cleaning agent into a bucket while adding on water.
• Get a towel to dip into foamy water. Please make use of it as you wash a car.
• Get the pressure washer and then rinse off a car.
• Please use a microfiber towel when drying it up; when done, rinse it off using a pressure washer.

You may also be interested to know how to wash a car with a pressure washer.

 

It’s A Wrap!

Now you learn which pressure washer nozzle for car to use, which is the white nozzle type. The other choices are also already provided for you. So, decide which one is ok for your pressure washer. You also learn already that a tip also affects water pressure!