When can I stop using a booster seat? According to the American Academy of Pediatrics, children should remain in a booster seat until they are at least 57 inches tall.
This is typically between eight and 12 years old for most kids. If your child reaches this height before then, you may need to transition them into different car safety seats or they can ride without one altogether.
It’s best not to wait too long since using a booster seat ensures optimal protection during an accident because it positions the vehicle’s lap belt correctly across their pelvis.
Children who don’t use boosters risk injury by wearing only the shoulder strap which might cause serious abdominal injuries if there was an accident due to poor positioning on impact with force from another object or person being thrown forward onto them after contact with vehicles’s interior.
How long is the Graco Contender 65 Good For?
Graco Contenders are one of the most popular car seat options for parents these days. They tend to be reasonably priced, and they can accommodate your child from infancy through their preschool years.
However, you should consider how long Graco recommends that this seat is used. Even though it’s made of sturdy materials meant to last a long time, there comes a point where using an infant or convertible car seat just isn’t practical anymore. Here’s more on how long this particular model will work for you.
How to clean my Graco Contender 65 car seat
Graco Contender 65 car seats are popular because they offer an affordable and simple solution for families who want a comfortable and supportive infant car seat.
But as with any baby gear, it’s important to keep the Graco in good condition so your child can continue using it safely. The following guidelines will help you clean out stains or messes that occur over time:
Clean the Seat Pad – Remove the pad from its frame by unzipping along all four sides of the top seam. Machine wash on gentle cycle in cold water only (no bleach) and allow air dry before replacing onto frame again.
To spot treat staining, use mild dish soap or upholstery shampoo combined with water; blot until completely clean.
Clean the Frame – Use a wet washcloth with cold water to spot treat any stains; use mild dish soap or upholstery shampoo combined with water and blot until completely clean. Allow frame to air dry before reattaching seat pad.
If there is rust, first remove loose pieces of dirt and debris from underneath the car seat using a screwdriver (or similar implement). Then apply white vinegar directly onto metal parts, leave for 15 minutes then scrub clean with an old toothbrush.
Rinse thoroughly under running water and allow frame to dry again before replacing your child’s Graco back into their vehicle!
Wipe Up Messes – For spills such as juice that have not caused damage yet will soon if left unattended, the first step is to soak up as much of the liquid as possible using a clean cloth or paper towel.
From there we recommend using an all-purpose cleaner such as 409 and blotting until completely clean. If you have carpet in your vehicle that has been stained by juice, use our r uffles stain remover for carpets .
Blot Away – For larger spills like those caused by water bottles or sippy cups with spouts it’s best to remove them immediately from car seats before they cause permanent damage.
After doing so use a dish scrub pad (such as Dawn) and warm water combined with enough white vinegar so that you can submerge your entire hand inside of mixture without feeling any burning sensations on skin .
Blot Away – The next step is to blot the stain away until you can no longer see any of it. You’ll want to use one hand for this process so that your other hand remains clean and ready in case another spill happens while cleaning up juice stains .
How do you disassemble a Graco Turbobooster?
The following instructions will help you disassemble a Graco Turbobooster. It is important to follow the steps carefully so that you don’t damage it or hurt yourself in the process.
Make sure your child has removed himself from the car seat before removing its straps and harnesses. Next, unclip each side of buckle by pressing down on both sides at once with two fingers; then pull apart.
You can also use pliers if necessary (although this may void your warranty). Once undone, lift up both shoulder belts simultaneously using one hand – do not detach them yet.
Then remove lower strap out of metal clip located next to vehicle’s seat belt without disconnecting any pieces. Finally, unbuckle top tether by pressing both sides at once with two fingers.
How do you tell when your baby has outgrown infant car seat?
As your baby gets bigger, he or she will outgrow the infant car seat’s weight and height limits. This is a good time to start thinking about transitioning to another type of car seat.
There are two main types: convertible seats that go from rear-facing (rear facing means babies should ride in a reclined position) only to forward-facing when they weigh at least 20 pounds and one year old; and combination seats which can be used rear facing for infants under 22 lbs., but also allow you to use it forward facing when they reach 22 lbs. plus one year old or older children who have reached the upper limit between age/weight requirements).
What age do babies outgrow infant car seat?
Babies outgrow infant car seats when they reach the height or weight limit, whichever comes first. Most convert to a convertible seat once baby reaches 22 lbs, but check your instruction manual for specific requirements in your model.
If you have an older child still using his rear facing infant seat (for example if he isn’t quite 20 lbs yet) then you can just keep him rear-facing in that same one until it’s time to move up! It’ll save money and hassle since there’s no need to buy another carseat again for several years!